Premium grade A revolutionary fast setting joint compound Plasterboard

Premium grade
A revolutionary fast setting joint compound
to skim or patch blue board, gyprock &
Plasterboard.
5: Apply One Pass ®
to joint (with 20
minutes to gain
desired thickness).
1: Clean the blue board
surface with a brush.
2: Place adhesive easy
tape over join.
6: Rehydrate 20
minutes after
application for
optimal results.
Fast! One Pass® delivers when time is tight!
3: Hydrate the surface.
Patch and sand CTS Rapid Set One Pass ® in JUST 60
minutes - paint in ONLY 90 minutes!
Single Coat Application
Patch up to 12mm thick with 20 minutes of working time. Non
shrink. No topping needed.
7: Sand in only 60 minutes.
Paint in just 90 minutes.
Versatile
Internal/external use. CTS Rapid Set One Pass ® will skim or
patch blue board, gyprock or plasterboard. Water resistant
and durable in wet environments. Will not shrink , crack or
promote mould growth. ASTM D3273.
4: Mix using traditional
method (one part clean water
to two parts One Pass ®).
CTS Rapid Set ® Cement Pty Ltd
P: 02 9632 1900
F: 02 9892 1825
E: [email protected]
Rapid Set One Pass ® comes
in convenient 11.4kg bags.
www.volumetric.com.au