How to perform a shared installation of FormFlow Filler 2.22

Adobe Enterprise & Developer Support
Knowledge Article ID: c2900
How to perform a shared installation of FormFlow
Filler 2.22
Steps to perform a shared installation
How to do a installation of FormFlow 2.22 so that workstations only have minimal files on them and the
application is run on a network server.
1. Install FormFlow 2.22 to a network location by running the SETUP.EXE found in the "Filler" directory. (ie.
c:\FF222)
2. Ensure that your users will have access to this network location.
3. Once you have completed installing Filler to your network location, three files will have been created
CASAIS.ISS, SETUP.INI and INSTALL.BAT in the directory.
4. Open the SETUP.INI file (located in the n:\FF222 directory) and remove the ";" from the line that has
CmdLine= in it.
5. On your workstations map a network drive to the root directory of the network machine that has the
FormFlow installation as a subdirectory (ie. n:\FF222). Use the same mapped network drive letter for all
workstations.
6. Ensure that the path to the casais.iss file in the SETUP.INI file matches the mapped location from your
workstations (ie. CmdLine= -s -f1N:\FF222\casais.iss)
7. Save and close the SETUP.INI file and go to the workstation and run the SETUP.EXE file (found in the n:\FF222
directory).
8. This will create your Start Menu item, a FormFlow directory, and the minimum necessary files to run Filler
over your network.
Product
FormFlow, 2.22
Platform(s)
Windows 95
Windows 98
Windows NT
Adobe Systems Incorporated • 345 Park Avenue, San Jose, CA 95110-2704 USA • www.adobe.com
Adobe, the Adobe logo, and "Better by Adobe." are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries. All other trademarks are the property of their
respective owners.
Copyright 2004 Adobe Systems Incorporated. All rights reserved.