Offset Umbrella Upgrade Kit “How To” ...

Transcription

Offset Umbrella Upgrade Kit “How To” ...
Offset Umbrella Upgrade Kit “How To”
sku#640-914
You should
have 1 unit on
Display and 2
or more in the
bay.
Display Unit
In Bay Stock
Look for Display Unit in Middle of Laydown Area
Find Umbrella Bay—Product on 2nd Tier.
Remove Top of Carton—Repair can be in carton
Do not remove product from carton. Please ensure
you tape carton back after upgrade is completed.
Floor Display leave on display.
Removal Step
Upgrade Step
Sticker Step
Removal Steps
1– Remove Sticker from crank handle
2– Use Phillips head screwdriver to remove screw
3– Remove Screw and washer.
Upgrade Steps
1– Replace with new Screw and 2 total washers
2– Replace Rotation Sticker
3– Place Sticker on Pole indicating direction
4- Close and Seal Carton—place back on shelf.
5– Discard old hardware—do not leave in carton
6– Place Service Sticker next to the UPC Code
7 – Complete Service Report
Parts List
1- washer
1- small washer
1- screw
1- sticker
1- label
Tools Required
Phillips Head Screwdriver
Razor Blade
(Carton opening & Sticker removal)
Tape (packaging) for Carton Sealing
customer service PST 8am to 5pm
1-866-905-4107 / www.yotrioint.com