How To Install TPC’s Chem-Gard 200°C CAT 6 Industrial Ethernet Cable ™

How To Install TPC’s Chem-Gard™ 200°C
CAT 6 Industrial Ethernet Cable
Figure 1
What You Need:
• Chem-Gard™ Cat 6 Cable
• RJ45 Connectors
• Wire Cutters — to cut, strip and trim the
Chem-Gard™ Cat 6 cable
• Pliers — used to flatten-out the Chem-Gard™
jacket and spline (cross-web) so the jacket fits
easily into the connector
• Crimp Tool — to crimp the wires and RJ45 together
Figure 2
• Cable Tester
HOW TO WIRE CHEM-GARD™ CAT 6
CABLE TO A RJ45 CONNECTOR:
1.Run the full length of the Chem-Gard™ Cat 6
cable in place; be sure to leave excess
2.At one end, cut the wire to length
3. Strip off about 1-2 inches of the Chem-Gard™
Cat 6 cable sheath
Figure 3
4. Pull back conductors and trim the spline
(cross-web) from the end (Figure 1)
5. Align the colored wires according to the layout
of the jack and add a load bar
6. You will need to use pliers to flatten the jacket
and spline (cross-web) before inserting into the
RJ45 connector (Figure 2)
Remember, TPC can add connectors
to your cable order before we ship it!
7. Slide RJ45 connector into place and use your crimp
tool to crimp the wires and RJ45 together (Figure 3)
8. Repeat the above steps for the second
RJ45 connector
9.Use a cable tester to ensure proper installation
TPC Wire & Cable Corp. Headquarters 9600 Valley View Rd, Macedonia, Ohio 44056
USA 800-521-7935 • Fa x 866-528-2930 • Canada 800-545-0122 • Mexico 001-877-283-1696
Chile 1230-020-0229 • ColOmbia 0-1-800-915-7519 • Peru 0800-54863 • www.tpcwire.com
WARRANTY AND DISCLAIMER: Seller makes no warranties, express or implied, with respect to this product, and seller disclaims any implied warranties of merchantability or fitness for any particular purpose.
Further, seller will not be responsible for any consequential, incidental or indirect damages (including, but not limited to, any loss of profit) from any cause whatsoever.
TPC1304 (02/14) ©Copyright 2014 by TPC Wire & Cable Corp. All rights reserved. No portion of this publication, whether in whole or in part, can be reproduced without the express written consent of TPC Wire & Cable Corp.