How to set up WAN, Wireless on Zyxel VMG1302-T10A (VDSL)

How to set up WAN, Wireless on Zyxel VMG1302-T10A (VDSL)
1. Type 192.168.1.1 at the address bar then hit Enter, type “admin” for
username and “password” for password then click login
2. The screen as shown will appear
Setting Broadband (WAN)
3. Click Network Setting > Broadband
4. The screen as shown will appear
5. Check the Encapsulation = PPPoE , Username , Password
6. When you click Advanced Setup, the screen as shown will appear
Setting Wireless
7. Click Network Setting > Wireless
8. The screen as shown will appear
9. Check out the settings
9.1 Security Mode: WPA2-PSK (default)
9.2 Security Mode: WPA-PSK as shown
9.3 Security Mode: WPA (not recommended)
9.4 Security Mode: WPA2 (not recommended)