Waters 2777 Sample Manager
Transcription
Waters 2777 Sample Manager
www.IetLtd.com Proudly serving laboratories worldwide since 1979 CALL +847.913.0777 for Refurbished & Certified Lab Equipment Waters 2777 Sample Manager The 2777 Sample Manager is high capacity, fast robotic sample processing system for the preparation and loading of samples into a HPLC or LC/MS system. The 2777 sample manager is available in both single and four injector configurations, with a number of accessories available for both configurations. As part of a Waters MS system with MassLynx 4.0 Software, the 2777 Sample Manager is the perfect choice for highthroughput sample management. Specifications System Type Sample Capacity Thermostatted Sample Tray Injection Volume Range Replicate injections Wash Station Precision Carryover Injection Speed Injection Cycle Time (minimum) Injection Modules Dilutor syringe sizes XYZ robot with only a syringe in the sample path 98 x 2 mL vials per tray 200 x 1 mL vials per tray 32 x 10 mL / 20 mL vials per tray (up to 2 trays may be configured) 6 deepwell or standard microplates 12 standard microplates (Note: Up to 2 stacks may be configured. Maximum 24 plates) Optional, 4-40 °C 10 to 1µL with optional larger loop and syringe 1-99 from one vial 2 different wash solvents < 0.2% RSD 20 µL loop overfilling < 0.5% RSD 20 µL loop partial filling < 0.05% 20 – 250 µL/sec. or (0.5-5 seconds to dispense 100 µL) < 20 sec (injection to injection, includes needle wash) One or four, six part valves, each equipped with a 20 µL loop (standard), optional loop sizes up to 5000 µL 1 mL, 2.5 mL (standard), 5 mL, 10 mL IET - Used Lab Equipment - Refurbished Analytical Laboratory Instruments Page 1 of 3 Sideport Syringe Sizes Electrical control Local User Interface Remote Control Ambient Environment Power Requirements Dimensions Weight 20µL, 80µL (standard) 2 RS 232C ports, 3 TTL inputs/ 1 opto coupler input, 2 relay outputs Control panel with scroll knob for teach functions PC control software with MassLynx Software 10-40°C, 75% relative humidity, non-condensing 100-264V AC. 45-66 Hz L: 828 mm. D: 385 mm. H: 648 mm 10 kg without accessories Ordering Information Waters 2777 Sample Managaer, Single injector Prep and load system for high throughput screening. Include: Part Number 1 pc Valve Drive Kit 1 piece, 2-solvent fast wash station Waters 2777 Sample manager, 4 injectors* Prep and load system for high throughput screening. Includes: 1 pc 4-valve module 1 pc kit for Waters Micromass MUX 1 pc dilutor with 2.5 mL syringe 1 piece, 2-solvent fast wash station (* requires PAL Stack) Sample Trays and Stacks Set of 6 pcs sample trays, 54 x 2 mL vials, for 6DW stack or peltier-cooled 6DW stack Sample tray for 32 vials 10/20 mL, or 21 vials 2 mL, includes holder, 114 mm 2777 system stack for 12 microtitter plates 2777 system stack for 6 deepwell plates or 6 sample trays for 2 mL vials Peltier cooled 6DW Stack 4°C to 40°C for: 6 standard microplates or 6 deepwell plates or 6 sample trays for 2 mL vials 415000408 415000409 415000410 415000411 725000177 IET - Used Lab Equipment - Refurbished Analytical Laboratory Instruments Page 2 of 3 Temperature regulation ±1°C Peltier cooled 12MT stack 4°C to 40°C for 12 standard microplates. Temperature regulation regulation ±1°C. 725000178 www.IetLtd.com Proudly serving laboratories worldwide since 1979 CALL +847.913.0777 for Refurbished & Certified Lab Equipment IET - Used Lab Equipment - Refurbished Analytical Laboratory Instruments Page 3 of 3