User Manual IDEP/CN8 Software

Transcription

User Manual IDEP/CN8 Software
IDEP/CN8 for Windows
User Manual 2014
© 2013-2014 SCB Foreign Trade
Version: 2014
User Manual
IDEP/CN8
Software
for
reporting Intrastat
Date: 2013-12-16
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Table of Contents
1
INTRODUCTION............................................................................................................................ 4
1.1
Important Remarks on the Software Package ............................................................................ 4
1.2
Time Schedule for Intrastat returns to Statistics Sweden........................................................... 5
1.3
How to use the Manual .............................................................................................................. 6
1.4
Terminology used ...................................................................................................................... 6
1.4.1
Parties involved in INTRASTAT Data Collection ............................................................ 6
1.4.2
Main Data involved in INTRASTAT Declarations ........................................................... 7
2 INSTALLATION AND UPGRADE............................................................................................... 9
2.1
Installation and Upgrade as a stand alone Application .............................................................. 9
2.1.1 Installation from the Web ......................................................................................................... 9
2.1.2 Follow the instructions of the installation program. ................................................................. 9
2.1.3 Installation successful ............................................................................................................. 11
2.1.4
Installation Folders ........................................................................................................... 11
2.1.4.1 First Installation or Upgrade ........................................................................................ 11
2.1.4.2 Additional Checks before Upgrade .............................................................................. 12
2.2
Installation and Upgrade in a Local Area Network (LAN) ...................................................... 13
2.3
Download of Standalone Installations to a Server ................................................................... 13
2.4
Un-install the Package ............................................................................................................. 13
2.5
Log Files .................................................................................................................................. 14
3. STARTING THE PACKAGE – LOGON SCREEN .................................................................. 15
4. THE GRAPHICAL USER INTERFACE (GUI) ........................................................................ 17
4.1
Status Check............................................................................................................................. 17
4.2
Screen Layout .......................................................................................................................... 18
4.3
Display Setup ........................................................................................................................... 19
4.4
Function Keys .......................................................................................................................... 19
4.5
Data Entry and Presentation Facilities ..................................................................................... 20
4.5.4
Pick lists ........................................................................................................................... 20
4.5.5
Field Colours .................................................................................................................... 20
4.5.6
TAB Order ....................................................................................................................... 20
4.5.7
Sort Order......................................................................................................................... 21
4.6
Notations used in the next Chapters of this Manual ................................................................ 21
5. RETURN ......................................................................................................................................... 23
5.1
The Life Cycle of a Return ...................................................................................................... 23
5.2
Edit Returns ............................................................................................................................. 24
5.2.4
Introduction to Data Entry of INTRASTAT Information ................................................ 24
5.2.5
Create the Return Header ................................................................................................. 25
5.2.6
Adding Return Lines to the Header ................................................................................. 27
5.2.6.1 Introduction .................................................................................................................. 27
5.2.6.2 Manual Data Entry of Return Lines ............................................................................. 28
5.2.6.3 Utilities for Manual Return Line Data Entry ............................................................... 32
5.2.6.4 Data Entry through Models .......................................................................................... 36
5.2.6.5 Copy Lines from another Return.................................................................................. 36
5.2.6.6 Usage of the Import Function ...................................................................................... 36
5.2.7
Multi-PSI Import .............................................................................................................. 39
5.2.8
Modify, Delete or Consult Return Information................................................................ 39
5.2.8.1 The Return Header ....................................................................................................... 40
5.2.8.2 Return Lines ................................................................................................................. 40
5.2.8.3 Totals by Reference Overview ..................................................................................... 41
5.2.8.4 Error Overviews ........................................................................................................... 41
5.2.9
Save Return Line as a Line Model ................................................................................... 41
5.3
Draft Output Returns................................................................................................................ 42
5.3.4
Draft Output Format......................................................................................................... 42
5.3.5
Draft Output / Print .......................................................................................................... 42
i (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.3.6
Draft Output / Disk .......................................................................................................... 42
5.4
INTRASTAT Output Returns .................................................................................................. 43
5.4.4
Return Approval / Disapproval ........................................................................................ 43
5.4.5
Aggregated Data .............................................................................................................. 45
5.4.6
Generate INTRASTAT Output ........................................................................................ 46
5.4.6.1 E-mail ........................................................................................................................... 47
5.4.6.2 Returns just sent ........................................................................................................... 47
5.4.7
INTRASTAT Output / All PSI's (Third Declarants only) ............................................... 47
5.5
Telecom Log ............................................................................................................................ 48
5.6
Overview Declarations............................................................................................................. 50
5.7
Report....................................................................................................................................... 50
5.8
End ........................................................................................................................................... 51
6. ACTIONS ....................................................................................................................................... 53
7. PSI INFO ........................................................................................................................................ 54
7.1
Net Mass Calculation Factors .................................................................................................. 54
7.1.4
Specifying Net Mass Calculation Factors ........................................................................ 54
7.1.5
Usage of Net Mass Calculation Factors ........................................................................... 55
7.2
Line Models ............................................................................................................................. 56
7.2.4
Specifying Line Models ................................................................................................... 56
7.2.5
Usage of Line Models ...................................................................................................... 57
7.3
PSI Goods Codes ..................................................................................................................... 57
7.3.4
Specifying PSI Goods Codes ........................................................................................... 57
7.3.5
Usage of PSI Goods Codes .............................................................................................. 58
7.3.6
Checking validity of Goods Codes .................................................................................. 59
7.4
Copy PSI Information .............................................................................................................. 59
8. PARTIES ........................................................................................................................................ 61
8.1
PSI's ......................................................................................................................................... 61
8.2
Users ........................................................................................................................................ 62
8.2.4
Create / Modify a User ..................................................................................................... 62
8.2.5
Types of Users ................................................................................................................. 62
8.3
Third Party Declarant ............................................................................................................... 63
8.4
Change current PSI .................................................................................................................. 63
9. IMPORT ......................................................................................................................................... 64
9.1
Format ...................................................................................................................................... 64
9.1.4
Specifying the Import Format .......................................................................................... 64
9.1.5
Usage of the Import Function .......................................................................................... 67
9.1.6
Draft Order ....................................................................................................................... 68
9.2
Multi-PSI Import ...................................................................................................................... 68
9.3
View Import-Log ..................................................................................................................... 68
10. SYSTEM ......................................................................................................................................... 70
10.1 Exchange Rates ........................................................................................................................ 70
10.2 Administrative Parameters ....................................................................................................... 71
10.3 Select Printer ............................................................................................................................ 72
10.4 Display Setup ........................................................................................................................... 72
10.5 Settings..................................................................................................................................... 72
10.5.4 E-mail ............................................................................................................................... 72
10.5.4.1
MAPI e-mail ............................................................................................................ 73
10.5.4.2
SMTP e-mail ............................................................................................................ 75
10.5.5 HTTP POST upload ......................................................................................................... 76
10.5.6 Proxy server settings ........................................................................................................ 76
10.6 Collecting Centre ..................................................................................................................... 76
11. SYSTEM MAINTENANCE.......................................................................................................... 77
11.1 Declaration Maintenance ......................................................................................................... 77
11.1.4 Archive To Disk ............................................................................................................... 77
11.1.5 De-archive ........................................................................................................................ 78
ii (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
11.1.6 Header Deletion ............................................................................................................... 80
11.2 Backup Idepdata....................................................................................................................... 80
11.2.4 Automatic backup ............................................................................................................ 81
11.3 Restore Backup ........................................................................................................................ 81
11.4 Clean-Up .................................................................................................................................. 83
11.5 Download ................................................................................................................................. 83
11.6 Download Log ......................................................................................................................... 84
11.7 Check for Upgrades ................................................................................................................. 85
11.8 Install extra languages .............................................................................................................. 85
11.9 Check for upgrades during start ............................................................................................... 85
12. CN8 .................................................................................................................................................. 86
12.1 General information about the Combined Nomenclature (CN8) ............................................. 86
12.2 The Graphical User Interface (GUI) ........................................................................................ 87
12.3 A brief look at the main concepts ............................................................................................ 88
12.4 Self-explanatory Texts ............................................................................................................. 88
12.5 Official Texts ........................................................................................................................... 89
12.6 Relationship between official and self-explanatory texts ........................................................ 89
12.7 Minimal Sequence ................................................................................................................... 90
12.8 Keywords ................................................................................................................................. 90
12.9 Add/Remove chapters .............................................................................................................. 90
12.10
Details of CN8 functions...................................................................................................... 90
12.10.4
Consult \ Select Year Nomenclature ............................................................................ 91
12.10.5
Consultation of official texts ........................................................................................ 91
12.10.6
Consultation of self-explanatory texts ......................................................................... 92
12.10.7
Consultation of the minimal sequence ......................................................................... 93
12.10.8
Hierarchical Search ...................................................................................................... 93
12.10.9
Keyword Search ........................................................................................................... 95
12.10.10 Consultation of footnotes ............................................................................................. 96
12.10.11 Consultation of introduction texts for sections and chapters ....................................... 97
12.10.12 Export a range of texts to disk ..................................................................................... 97
13. WINDOW ..................................................................................................................................... 100
14. HELP............................................................................................................................................. 101
15. IDEP/CN8 IN A MULTI-USER LAN ENVIRONMENT ........................................................ 102
15.1 Introduction ............................................................................................................................ 102
15.2 Functions accessible when only one User logged on ............................................................. 102
15.3 Functions accessible by one User at a time ............................................................................ 103
15.4 Accessing information with multiple Users ........................................................................... 103
16. DIAGNOSTICS............................................................................................................................ 104
16.1 Introduction. ........................................................................................................................... 104
16.2 Running IdepTest. .................................................................................................................. 104
16.3 Options. .................................................................................................................................. 104
16.4 Log file. .................................................................................................................................. 104
16.5 Collected Information. ........................................................................................................... 105
16.6 Repair ..................................................................................................................................... 105
16.7 Uninstall ................................................................................................................................. 106
Windows is a registered trademark of Microsoft Corporation.
Other brand and product names are trademarks or registered trademarks of the respective holders.
iii (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
1 INTRODUCTION
1.1
Important Remarks on the Software Package
The software package IDEP/CN8 (INTRASTAT Data Entry Package / Combined Nomenclature
8 digits) was developed for the Providers of Statistical Information (PSI's) in order to assist them
to create statistical declarations for their Competent National Administration (CNA).
The main functions of the package are data entry and the validation of that data. An additional
function of the package is the importation, again with validation, of the necessary data from
existing information systems in a company. The package will transform this data to the official
format accepted by the User’s CNA.
The IDEP/CN8 package can also be used by Third Declarants who will create the statistical
declarations for several PSI's.
Several functions have been included in the package to facilitate the creation of declarations,
including pick lists, standard values and calculations. Extra functionality has been included for
the use of the CN8 Goods Codes.
Different possibilities have been foreseen for producing the declarations. They can be sent by
telecom or e-mail.
The most important official INTRASTAT output generated by the package produces an output
file in the XML-standard INSTAT/XML, which meets the needs of the CNA.
4 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
1.2
Time Schedule for Intrastat returns to Statistics Sweden
Reference month
Deadline
December 2013
17/1
January
14/2
February
14/3
March
14/4
April
15/5
May
16/6
June
14/7
July
14/8
August
12/9
September
14/10
October
14/11
November
12/12
December
16/1-2015
5 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
1.3
How to use the Manual
The manual has basically been set up according to the Menu structure of the package. This
implies that the Chapter Titles within the manual refer to the Menu Options in the package.
1.4
Terminology used
Before installing the package, this Chapter will explain some basic concepts.
1.4.1 Parties involved in INTRASTAT Data Collection
CNA:
Stands for "Competent National Administration". This is the statistical
office of the User’s country. In case of questions or problems with
INTRASTAT, or the use of the IDEP/CN8 software, the CNA should
be contacted. New versions of the software should always be received
via the CNA, in order to ensure the integrity of the data.
Collecting Centre:
The location where INTRASTAT returns are collected.
PSI:
Stands for "Provider of Statistical Information". These are Importers /
Exporters who are obliged to make INTRASTAT returns to the CNA.
The PSI is identified by VAT number.
ThirdParty
Declarant or Agent:
A company that makes INTRASTAT statistical declarations and sends
them to the CNA on behalf of one or more companies (i.e. PSI's).
User:
A person who is defined in the IDEP/CN8 package and who can
access and use the package. Different Users of the package can have
different authorisations. The authorisations specify whether a user has
access to a given set of functions or all functions.
There are two types of functions:
1. Functions accessible to every User defined in the system.
2. Functions specific to the Supervisor. These are functions related
to the maintenance of sensitive information. For example, defining
Users and their authorisations, creating PSI's, setting system
parameters, etc. and functions related to the responsibilities for the
correctness of the statistical information. (e.g. approving a return).
Four types of Users can be defined.
1. Supervisor with Modify authority (= the default User IDEP). This
User can perform all functions in the package.
2. Normal User with Modify authority. This User can perform the
functions for every User, but not the Supervisor functions. He can
consult the Supervisor functions.
3. Normal User without Modify authority. This User can Consult the
6 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
functions for every User (function type 1. above).
4. Supervisor without Modify authority. This User can Consult all
functions.
1.4.2 Main Data involved in INTRASTAT Declarations
Return:
All statistical information for a given PSI, in a given Statistical
Period, for the given Flow of goods is contained in a return. A return
is composed of 1 header and one or more lines.
A return header of a given PSI is basically identified by the
following.
1. The Statistical Period (month).
2. The Flow (arrival or dispatch of goods).
3. The type of information (new information, corrections to a
previous return, ...).
A return line can be seen as 1 transaction (e.g. information on an
invoice). A return line can also contain information aggregated for
several transactions. A return line is identified by a unique number.
NOTE: A PSI can send several returns of the same type (i.e. Arrival of
goods) for the same Statistical Period (i.e. January 2014). Because of
this the identification of the returns requires some special attention.
The following two situations should be considered.
1. A User creates several returns, of the same type, for the same
Statistical Period and Flow, on the same PC. In order to uniquely
identify the return, it is identified by a Sequence Number (e.g.
return 1 and 2).
2. The same PSI generates returns from several PC's.
On every PC the return can be identified by for example, the sequence
number "1". Beside the sequence number, another qualifier is
necessary to uniquely identify the return. This qualifier is called a
"Workstation ID" in the package. If for example, PSI “X” generates
INTRASTAT returns from three PC's, then he should identify the PC's
by e.g. AA, BB and CC.
The returns will be uniquely identified in the whole EU by the PSI
VAT Number + Workstation ID + Return Sequence Number (e.g.
999999999900 _AA000001).
CN8 Goods Codes:
Combined Nomenclature. The 8 digit goods codes that are used within
7 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
all the Member States of the EU. The CN8 part of the package
provides user friendly facilities to find the correct CN8 Code for the
goods the User is Importing / Exporting.
It is possible for a PSI to specify a table within the package that
defines a relationship between the goods codes he is familiar with inhouse and the official CN8 Goods Codes.
8 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
2 INSTALLATION AND UPGRADE
Important remark: The IDEP/CN8 Installation and Upgrade process uses a Windows feature named
“Windows Installer” (“MSI”). The IDEP/CN8 Installation Process will detect if MSI is installed on the
User’s PC, which normally is the case, and if so, if it has the correct version. If this is not the case, an
automatic installation or upgrade of MSI is done if the CNA has enabled this feature. If the CNA has not
enabled this automatic feature, confirmation of the User is asked. If the User does not want to install or
upgrade MSI, IDEP/CN8 can NOT be installed.
2.1
Installation and Upgrade as a stand alone Application
IDEP/CN8 is distributed via the Internet (if supported by the National Administration). Even
though the installation / upgrade procedures are quite similar in both cases, they are described in
separate Sections hereafter.
Minimum requirements for the installation or upgrade are as follows.
 A PC running MS Windows2000, XP, 2003 Server, VISTA, Windows 7 or 2008 Server.
 A monitor with a minimum resolution of 600x800.
 70 MB of free Hard-disk space.
2.1.1 Installation from the Web
1. Go to the Web-site of the National Administration from where you want to install or upgrade
the IDEP/CN8 package. Follow the instructions provided by the National Administration to
start the download procedure.
2. When the download procedure is started, select to run the program from its current location.
3. Should a Security Warning appear, select “Yes”.
4. Continue with Item 2.1.2.
Note: It is possible to cancel the installation process at any time. The user will be asked for
confirmation. In some rare circumstances this cancellation can take some time (e.g. in case of a
very slow and problematic Internet connection).
2.1.2 Follow the instructions of the installation program.

If applicable, select the user interface languages to be installed and the installation
program’s language. The language selection dialog serves two purposes:
1. It allows installing or removing the available language versions of the User Interface
of IDEP/CN8;
2. It allows selecting the language of the User Interface of the installation program itself.
9 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Note, that the language selection dialog is not presented if there is only one single
language available or if the Check for Upgrade option is being executed.
Selecting the IDEP/CN8 User Interface language is simply done by clicking on the
appropriate buttons. All available languages are already pre-selected. If an existing
IDEP/CN8 installation is updated, the already installed languages are indicated with an
‘*’ (asterisk) on the option button. If a language is de-selected, it will be removed from
an existing IDEP/CN8 installation.
The User Interface language of the installation program is automatically set to the last
selected language. Click several times on the various language options in order to select
the desired dialog language. The language is immediately switched (the chosen language
is shown in brackets in the title bar).
If more than one language is available the most suitable language is pre-selected. This
language is derived from the system, the default language proposed by the National
Administration and the language(s) already installed.

Choose a “Standalone or Server” installation. Note, that in a Client/Server configuration,
the Server must be installed or upgraded first. Installation of a Server is identical to a
Standalone installation.
This dialog is skipped if only a language is added or removed from an existing IDEP/CN8
installation with the same version.

Choose the Installation Folder, either take the default, or select another destination. When
performing an upgrade, be sure to select the same directory where the previous version
of the package was installed, this is the directory where the Login program is found. This
directory will be pre-set by the installation program. The required and available disk
space are shown.
This dialog is skipped if only a language is added or removed from an existing IDEP/CN8
installation with the same version.
Note 1: it is possible to upgrade any IDEP/CN8 version from version 3 on. If an attempt
is made to downgrade the package, for example install version 5 over version 6, an error
message is issued.
Note 2: although not recommended, it is possible to install or upgrade more than one
version of IDEP/CN8 on the same PC in different folders. This is done by first uninstalling the existing package while keeping the data, and then installing the package as
described in this Section in a different Installation Folder. In this case, the existing
installation is of course not upgraded, and the new installation does not contain any
information entered in the existing installation. The shortcut on the desktop and the Start
Menu will always point to the last installed package.
3. Now the installation program will start copying. Note, that the copying of the CN8 databases
may take some time.
4. Click finish to leave the installation program.
10 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Note: It is possible to cancel the installation process at any time. The user will be asked for
confirmation.
2.1.3 Installation successful
At the end of the installation, the User may be requested to restart his PC. If this message
appears, restarting is necessary to install the required Windows system components.
The User will now find the IDEP/CN8 program installed or upgraded in the selected directory
and the subdirectories created by the installation process, in the languages provided by the
National Administration. The program is started by either the Windows Start Menu, by double
clicking on the IDEP Shortcut put on the Desktop by the installation program, or by double
clicking on Idep.exe in the root directory.
2.1.4 Installation Folders
2.1.4.1
First Installation or Upgrade
The installation procedure will detect a ‘questionable’ installation folder and warn about this.
Early during the installation the User is prompted to choose the installation directory. Once this
directory has been selected the User must click ‘Next’ to proceed with the installation in this
location. At this point the installation procedure will check if the chosen directory is suitable:
- Check if the User has sufficient rights to write to this directory;
- Check if the directory is a suitable directory.
If the user does not have sufficient access rights (the user cannot create files/directories) the
installation procedure will issue a warning: “You do not have sufficient privileges to install in
<dir>”.
At this point the User can only click the ‘OK button’ and control will be returned to the directory
(folder) selection dialog. Here the User must choose another directory or abandon the installation.
If the chosen directory is not a suitable directory a confirmation message will be displayed: “It is
not recommended to install in this directory <dir>. Do you want to choose another directory?”
If the User confirms the message, control is returned to the directory selection dialog where the
User can choose another directory or abandon the installation.
If the User does not confirm the message the installation will proceed. The User should be aware
that problems can occur later on in the process.
Questionable installation directories that are detected at this stage are:
- Root of a drive (e.g. “C:\”);
- Root of Windows’ “Program Files” directory;
- A subdirectory called WINDOWS*, WINNT*, SYSTEM*, or Program Files (local name)
exists;
- The installation directory is somewhere in the Windows or System directory;
11 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
-
Installation directory with more than (~12) sub-folders and/or (~7) files and not already
containing an IDEP installation;
An IDEP subdirectory such as DDDDD\MS (MS is ISO code of the Member State). In this
case it is likely that the User should have been installing in DDDDD rather than the ‘MS’
subdirectory.
The checks are also carried out during the automatic update (when the installation path is already
known). If the privilege check fails the installation is abandoned.
The ‘questionable’ path check only issues a warning message, the installation will proceed.
Note that the above describes pre-installation checks that are carried out to avoid problems during
and after the installation.
2.1.4.2
Additional Checks before Upgrade
Installation Directory:
If after the Installation of IDEP the User should manually move the installed package to another
place on his disk(s), this would cause an inconsistency between the information about the
installation as recorded in the Windows Registry and the real situation as ‘caused’ by the User.
The Windows Installer heavily relies on the information in the Windows Registry. The Windows
Registry is of course not aware of the changes the user has made to the installation location.
This problem is detected when the User tries to Upgrade his IDEP installation. The Upgrade
procedure will check if IDEP exists on the installation path as recorded in the Windows Registry.
If this is not the case, it will:
-
Issue a warning message stating that the installation has gone missing and that the User
should enter the appropriate path later on:
-
Attempt uninstalling the previously installed IDEP installation (the Upgrade procedure will
consult the Windows Registry to find out). This un-installation will be completely silent. In
rare circumstances this may fail (if the Windows Registry is really ‘confused’ about the
installation state). The Upgrade procedure may issue a warning message but proceeds in any
case:
-
Cleanup the Windows Registry.
Having thus removed all (inconsistent) traces of a previous installation from the Windows
Registry, the Upgrade procedure will continue as if this where a first time installation. This will
ensure that the prompt for the installation directory will be shown. This prompt would be the
opportunity to enter the “new” installation directory (if applicable).
12 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
2.2 Installation and Upgrade in a Local Area Network (LAN)
IDEP/CN8 can be used in an environment where more persons are working on Intrastat
declarations at the same time on different work stations, but on the same installation of the
program.
This so-called Client/Server environment is created by first installing the program on a Server
system and then installing the Client systems. A Client installation can be seen as a Reference to
the IDEP/CN8 installation on a Server.
The procedure to install or upgrade an IDEP/CN8 Server is completely identical to the
installation or upgrade of IDEP/CN8 Standalone, as described in the previous Section.
An IDEP/CN8 Client is installed by following the same procedure, however:
 only minimal hard disk space is required;
 in Step 2. the “Client” option must be selected;
 in Step 2. the “Installation Folder” to be entered must be the location where the Server is
installed;
 Step 3. will only perform the copying of some Windows system files.
2.3 Download of Standalone Installations to a Server
IDEP provides the possibility to convert Standalone Installations into a Client/Server
configuration. This means that the individual databases of the Standalone Installations are
combined into one database on a Server system (which in fact may be one of the original
Standalone systems).
This function is provided as a Menu option in the System Maintenance Menu
2.4 Un-install the Package
The IDEP/CN8 for Windows packages can be un-installed simply through the usual Windows
un-install feature.
1.
2.
3.
4.
Open Add and Remove Programs (Start/Control Panel/Add and Remove Programs).
Choose IDEP CN8 and click the Add/Remove Programs button.
Confirm the question (‘Are you sure you want to remove...’).
On the question ‘Remove the IDEP-Executables and –Data as well?’ answer ‘Yes’ if you
want to completely remove IDEP/CN8, or ‘No’ if you want to keep the complete installation
but just want to remove the registration, short-cuts etc.
Please note, that this cleanup procedure will not delete any files from the installation directory
if:
- It concerns the Root of a drive (e.g. “C:\”);
- It concerns the Root of Windows’ “Program Files” directory;
- A subdirectory called WINDOWS*, WINNT*, SYSTEM*, Program Files (local name)
exists;
- The installation directory is somewhere in the Windows or System directory;
- It concerns an installation directory with more than (~12) sub-folders and/or (~7) files.
13 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
A warning message will be displayed.
2.5 Log Files
All IDEP/CN8 for Windows programs log problems in a .LOG file. This Log file can be found in
the sub-directory named LOG of the Member State directory of the IDEP/CN8 installation. The
filename is XXXX_date.log, where XXXX = the application name, see example below.
C:\Intrastat\Idep_Cn8\SE\LOG\IDEP_01012013.log.
If problems are reported to the National Administration, the User is encouraged to supply these
log files as they contain all information required to solve the problem quickly.
If the User supplies a Backup of his IDEP installation to the National Administration, created by
IDEP, it will automatically include all log files.
14 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
3. STARTING THE PACKAGE – LOGON SCREEN
The IDEP/CN8 package is run by executing Idep.exe found in the root directory of the
installation and selecting “IDEP” as the “Application Name”.
Idep.exe can be started via the Windows Start button by selecting IDEP CN8 in the programs
folder (as specified during Installation), or by double-clicking the program file Idep.exe in
Windows Explorer, or by double-clicking on the IDEP Shortcut put on the Desktop by the
installation program.
Note, that the type of shortcut created is one in which the ‘target’ field points to the exact
installation location of IDEP. Other shortcut types, for which the installation location is hidden in
the Windows Registry, just include ‘IDEP CN8’.
First the Login program will perform a check if long file names are supported on the system; if
not, it will issue a message and it will not be possible to start IDEP - it is possible to start CN8
however.
Then the availability of temporary workspace on the Users’ hard disk will be checked, as
defined by the Users’ settings of the Windows TMP or TEMP environment variables. If these
variables don’t exist, the Login program will try to create the TEMP variable itself. If no
workspace area can be found or created, it is impossible to start-up IDEP/CN8 and a message is
presented in the English language as in this case the message text in the appropriate language
can’t be retrieved.
If the result of this check is OK, the following so-called “splash-screen” will appear:
15 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
This screen allows the User to select the following.



The Member State (if more than one package is installed).
The language (if more than one language is included by the National Administration that
prepared the package).
The Application Name (CN8 or IDEP).
When the User has selected the IDEP application, he has to enter the following additional
information before entering the package.


The User Name.
The Password.
16 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
4. THE GRAPHICAL USER INTERFACE (GUI)
4.1 Status Check
Before the IDEP/CN8 application starts, a number of checks are performed. They include:
A check if any of the databases is corrupt. If this should be the case, the User can’t enter IDEP
– which offers the “Clean-up” facility to repair databases. Therefore, if a serious start-up
problem was encountered, IDEP will start in “Safe Mode”.
In this mode only the maintenance options (and help and exit) are available. This allows the User
to Create a backup of the current (corrupt) situation, attempt to Clean-up the databases or Restore
a backup.
After quitting the safe mode IDEP will attempt to start in normal mode again (after a successful
Clean-up for example).
If the database of the default PSI is corrupt, IDEP will start up in normal mode with no PSI
selected. In this situation the User can Clean-up the database, chose another PSI (if available) or
make a new PSI.
Note:
In some circumstances a database is corrupted beyond repair. The User should contact his CNA
in that case.
A check if the User’s screen resolution is at least 800x600, which is the minimal requirement
to work with the package in a convenient way. If this is not the case, a warning message will be
presented, but the package will proceed anyway.
If a User has many declarations containing many lines, this may take a while. It is recommended
to let the procedure complete its check; however, the User can interrupt it in case of an
exceptionally large number of declarations. The program will check the last, most relevant,
declarations first.
The Import Formats defined in the package will be checked and adjusted if necessary to reflect
any changes in the requirements made by the CNA.
The PSI Goods Codes defined in the package will be checked and Goods Codes for which the
CN8 code has become invalid for (one of) the years supported by the new package will be
marked in the PSI Goods Codes list.
When IDEP is upgraded to a new annual version, the maximum / minimum limit values
connected to CN8 Codes are updated with the limit values of the previous year, but only if the
PSI’s limits are higher than those supplied by the CNA and the CNA’s limits are not zero.
For the current (default) PSI, the Line Models defined in the package will be checked on codes
(CN8 Codes, including PSI Goods Codes, Country Codes, (old EMU) Currency Codes, etc.) that
are no longer valid. Line Models that have become invalid for the years supported by the new
package will be marked and a list will be presented. The Line Models for other PSIs, if defined in
17 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
the package, will be checked when they are selected as the current PSI during the usage of the
package.
For the current (default) PSI, and the Third Declarant identification are checked, for which the
format or check algorithm may have changed. Also see the respective Sections on these items. A
message is presented if invalid values are found.
The identification numbers for other PSIs, if defined in the package, will be checked when they
are selected as the current PSI during the usage of the package.
Finally, a check is made if this is a first time installation of IDEP/CN8 for Windows. In that
case, no PSIs exist in the package yet. To assist the User who doesn't know what to do first, the
Add PSI Parameters screen is automatically presented in that case. The screen will look as
follows:
4.2 Screen Layout
Once the application is started, the graphical user interface (GUI) shows the default application
screen containing the following information.
 Application name, active PSI identification and PSI name.
The Menu bar presenting the main options. Sub-options are shown by clicking on a main
option.
The Tool bar for context dependent buttons.
18 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014


The IDEP information area in which the Screens are shown. Normally, the Default PSI’s
Return List is presented here after Logon. If the User has switched on the option “Save /
Restore Workspace”
The Status bar.
So-called ToolTips provide brief information when the mouse pointer is positioned on a Button.
4.3 Display Setup
The “Display Setup” function is selected by “System / Display Setup”.
This option allows the User to change the colour scheme used to identify the status of data entry
fields. It also defines the layout of the Toolbars and the cursor behaviour of certain fields.
The check box “Automatic TAB” controls the behavior of the cursor during data entry in a
Return Line. For a new IDEP installation, by default this function is switched on. If this function
is switched on, the cursor will automatically move to the next field if the required data is entered
correctly in the current field. This only applies to fields with a fixed data length.
The check box “Enter as TAB” allows the User to use the Enter key instead of the TAB key in
most screens.
The check box “Save/Restore Workspace” enables the following behaviour: When IDEP/CN8
quits the current screen size and position are stored. Also the maximised state is stored. A list of
active list screens (e.g. Returns list, Exchange Rates etc.) is saved.
When IDEP/CN8 restarts the screen layout and the active list screens are restored (only their
position, not their size).
If the mechanism is switched off IDEP/CN8 will start with the Returns list displayed as usual.
4.4 Function Keys
For reasons of compatibility with IDEP/CN8 for DOS, and for those Users that prefer to work
with keystrokes instead of Mouse clicks, many options can also be activated by function keys.
The following function keys are normally active.
F1 : Shows the help text for the currently selected function.
F2 : When pressed on a data entry field, this function key will display a list, from which a value
can be selected.
F3 : Exit from IDEP.
F4 : Add.
F5 : Modify.
F6 : Consult.
F7 : Delete.
F8 : Print.
19 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
F12 : Refresh.
ENTER : Due to Windows’ restrictions, the functionality of the Enter key differs from that in the
DOS package. The behavior of the Enter key is controlled by a User preference.
ESC : This key will return to the previously selected function or to the Menu.
TAB / Shift + TAB : Moves to the next entry, or button in a data entry screen. The behavior of
the TAB key is controlled by a User preference.
Alt + Arrow Down / Alt + Arrow Up : Same as TAB / Shift + TAB.
Sometimes, a combination of the “Shift” key and a function key has to be used, for example
“Shift + F6”. Note, that in the DOS package the combination “Alt + function key” is used, which
is not always possible in Windows.
The actual meaning of a function key, like in the DOS package, is sometimes context dependent.
4.5 Data Entry and Presentation Facilities
4.5.4 Pick lists
When positioned on a field where it is obliged to enter a pre-defined code from a list, either the
Arrow Button at the right hand side of the field can be clicked on or the F2 key can be pressed,
which will present a choice of all possible values. The User can choose a value from this list by
clicking on the desired value. Depending on the size of the list, two different presentations are
used by default:


a so-called Dropdown Box for short lists, clicking on the desired entry puts its value
immediately in the field;
a selection Window for longer lists, an entry is selected by clicking on it and its value is put
in the field by clicking on the OK Button.
In both cases, also the up- and down-arrow keys can be used on the field in which case the
possible values will be shown one by one.
Note: when instead of the F2 function key, Alt+F2 are pressed together on a field with a pick-list,
always the selection Window is presented and not the Dropdown Box. This allows the User to
consult additional information if this is present in the list.
4.5.5 Field Colours
Refer to Section Display Setup
4.5.6 TAB Order
Users who prefer to work with Keys rather than the Mouse, can use the following options.
20 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
If Enter as TAB in “Display Setup” is disabled, then the TAB Key is used to jump from one field
to the next and to the Buttons. The Enter key can be used to activate a Button.
If Enter as TAB in “Display Setup” is enabled, then the Enter key will move the focus to the
next element (field or button) that can get the focus. Pressing Enter on the last element will move
the focus back to the very first element. The original behaviour of the Enter key (Enter is
equivalent to pressing the OK button) is disabled in all windows except lists.
Pressing Enter on a button (e.g. OK or Cancel) will activate the button instead of moving the
focus. Pressing Shift + Enter will move the focus to the previous element (just like Shift + TAB
would do).
The original behaviour with the (Shift +) TAB key is unchanged.
4.5.7 Sort Order
In many lists presented in IDEP, clicking on the Column Header will perform a “Sort” function.
For example, clicking on the “Correct” Column Header will sort on Correct (“Yes”) and
Incorrect (“No”) entries in the list.
4.6 Notations used in the next Chapters of this Manual
From the previous Sections of this Chapter, it will be clear that most functions of the package can
be started in more than one way.
For example:
 The function “Line Models” is started by:
 selecting the Main Menu option “Info PSI”, Sub-option “Line Models”;
 or by a Mouse Click on the Button “Line Models” on the Main Tool bar.
 On the Line Model screen itself, the function “Add Line Models” can be performed by:
 selecting the Main Menu option “Actions” (or by calling the Action list via a click on the right
Mouse Button), Sub-option “Add”;
 or by a Mouse Click on the Button
“Add” on the context dependent Tool bar;
 or by pressing the Function Key F4.
In the next Chapters, for each Function the way it is invoked is indicated in a more brief way.
For the above example, the notation is:
 The function “Line Models” is started by “Info PSI / Line Models” or by clicking the “Line
Model” Button.
 The function “Add Line Models” is started in “Info PSI / Line Models” via “Actions / Add” or
by clicking the “Add” Button
or by the F4 Key.
Other conventions are:
 Function names are written in Bold & Italic: “Function”.
 Menu options, Button names, etc. to start functions are written in Italic: “Menu”.
21 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014

Field names are written in Bold: Field.
22 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5. RETURN
5.1 The Life Cycle of a Return
All actions related to the INTRASTAT return can be executed by activating the Menu bar
option "RETURN".
The following scheme gives an overview of all main actions that can be performed on a return.
The use of the corresponding Menu options and function keys in the software are described in the
following Sections.
The various steps in the life cycle of a return are as follows.
STEP 1:
Create a return header which identifies a new return.
STEP 2:
Modify the return by changing the return header, or by adding, deleting or
modifying lines.
Note that lines can be added.

Manually
23 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
STEP 3:
 By means of Line Models.
 By copying information from other returns
 Via the import facility
The complete return can be deleted, in which case no further steps can be taken.
Approve the return before INTRASTAT output can be completed.
At the moment of approval the return lines are aggregated
Once the return is approved it can not be modified or deleted anymore. If the User
still wishes to make modifications, the return can be dis-approved.
STEP 4:
A return can be processed as official output once only, then it is locked from
being processed again. A return can be unlocked in case the data in the message
has been corrupted.
STEP 5:
If a return is not needed “on-line” anymore, it can be archived. This means that
the return is put on disk and the return lines are deleted in the database.
The archived return can still be put back in the database via the de-archiving
function.
STEP 6:
After STEP 5, the header of an archived return remains accessible for reference
purposes. If however, this reference is not needed anymore, it can be deleted.
5.2 Edit Returns
5.2.4 Introduction to Data Entry of INTRASTAT Information
Actions related to the creation and updating of INTRASTAT returns are started under the Menu
option "Return / Edit Returns" or by clicking the “Edit Returns” Button
A return consists of one return header and several return lines. Therefore the creation of a return
basically consists of two steps.
1. First the Return Header is created, in which the Statistical Period and Flow are specified.
2. Once the header is created, the Return Lines can be added to this return header.
Return lines can be added in several ways.
-
Manual data entry is the simplest way.
By means of Line Models.
By copying information from other returns.
Via the import facility.
Modifying an existing return can be related to modifying the return header or adding, deleting
or modifying return lines.
24 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.2.5 Create the Return Header
STEP 1:
Select "Return / Edit Returns" or click on the “Edit Returns” Button. The PSI
Returns overview is presented.
Note, that after creation of a PSI, the PSI Returns overview is presented by default
after starting up the package.
STEP 2:
To “Add a Return” to the list of returns of the current PSI, use “Actions / Add” or
click the “Add” Button
or press F4. Enter the Header information, which is
common for all the return lines.
In first instance, the Return Type has to be selected.
If enabled by the CNA, the Return Type is preset to “Creation of a new Return”,
else the field is empty.
25 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
After selection of the Return Type, other Header fields that need to be entered
become visible.
After having entered all fields, click on Add to save the information.
26 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
NOTE 1: When the User creates or modifies a return header and there is no
declaration with the same Flow and Threshold Category created and
sent for the previous month, a message is displayed to warn him that he
didn’t produce and/or send a declaration for the previous month.
This message is not displayed when the first declaration is created.
NOTE 2: It is not possible to create a return for a Statistical Period outside the
validity years of the package.
NOTE 3: It is not possible to create a return with a Statistical Period after the
current month.
NOTE 4: Creating a return with a Statistical Period in the previous year, is only
possible if the CNA has created an IDEP package that is valid for two
years.
STEP 3:
Now that the return header is created for a certain flow and period, the return lines
can be added.
5.2.6 Adding Return Lines to the Header
5.2.6.1
Introduction
When the return header is created, return lines can be added for all types of returns, except for
delete or nil returns, which by definition have no lines.
“Modify Return” for a new or existing return is either automatically started after creation of the
header, or it can be manually started by selecting the return (click on it) and clicking the
“Modify” Button, or selecting “Actions / Modify”, or by the F5 key.
The User will now see the “Return overview” of the return lines, which is still empty in this
stage. Summary header information is displayed.
27 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Return lines can now be added in several ways.




Manual data entry is the simplest way
By means of Line Models
By copying information from other returns
Via the import facility
5.2.6.2
STEP 1:
Manual Data Entry of Return Lines
The function “Add Return Lines” is started via “Actions / Add” or by clicking on
the “Add” Button , or by the F4 Key, to add a return line manually. This will
present the detailed “Return Line” entry screen.
28 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
IDEP provides utilities to make the manual entry of data easier. They are
described in the following Section. General remarks for data entry are:
The data can be entered in a random order. Note however, that certain items have
influence on the behaviour of other items. For example, entering the Nature of
Transaction A may, if applicable, pop-up a new field for Nature of Transaction B.
The TAB key or the Enter key (if enabled by the User in the “System / Display
Setup” function.
When data is entered manually through the keyboard, IDEP can be instructed to
automatically jump to the next field when the data that has been entered was
correct. In this case, the User doesn’t have to enter the TAB after entering the
value. Of course this mechanism only works for fields in which data with a fixed
length must be entered.
The facility is enabled or disabled by clicking on the check box Automatic TAB
in “System / Display Setup”.
When a field value that was previously entered is selected, by double-clicking or
by using the TAB key, a new value that is entered replaces the previous one. If the
User just wants to add a character to the field, he has to position in the field using
the mouse or arrow keys.
After filling in the last field on the screen the information is saved by clicking the
“Add” Button. If some of the required information is still missing or one of the socalled Quality Checks fails, the program will present a warning message regarding
the missing data. However, the User can also choose to save an in-complete line,
in this case the line will be marked as “Incorrect”.
29 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
If enabled by the CNA, at the time a line is being saved (“OK” or “Save” button
pressed) it will be checked if, for the current declaration, a line with the same
combination Declarant Reference, CN8 Code and Invoice Value already exists.
If this is the case a warning message will be issued: “This line already seems to be
entered”. The message will be combined with other warnings, for example the
above quality checks, if applicable.
The “Clear All” Button can be used to clear all fields on the screen.
A new screen will be provided automatically for data entry. To stop adding lines,
simply press <ESC> or click on the Cancel Button. The last (still empty) Line will
not be added to the declaration.
STEP 2:
After adding lines the “Return overview” screen is presented, the User now sees
that the new line is added to the list.
The list is presented to the User in modify mode. If he wishes to “Modify”
information for a specific line, he has to select that line and press Enter, or double
click on the line, or use “Actions / Modify”, or click on the “Modify” Button or use
the F5 Key.
The function “Consult Header” is started via “Actions / Header” or clicking on
the “Header” Button or by the F11 Key. Here the User can consult the updated
Header information.
30 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Declarant Ref. No.
The User can define reference to business data, e.g. invoice item number.
Partner Country
In the case of dispatches, the country code is given for the last known recipient EU member
state. In the case of arrivals, the country code is given for the dispatching member state.
Country code is selected in IDEP from an option list.
Nature Of Transaction A
Give the one-digit code according to the table below, which shows the type of transaction
involved for each commodity item. Transaction type is selected from
an option list in IDEP.
PSI Goods Code
The in-house PSI Goods Codes can be used within the package instead of the official CN8 Goods
Code list. It is required to define a relationship between a PSI Goods Code and the corresponding
CN8 Goods Code.
CN8 Goods Code
The commodity code (also called the CN code) consists of the first eight digits of the
commodity code shown in the customs tariff. Search of commodity codes can be made in
IDEP/CN8. An automatic description of the commodity will appear.
Suppl. Units
Supplementary unit is to be given for certain commodities, for instance, litre, piece and pair.
IDEP specifies the supplementary unit that is to be used when required.
Net Mass
Give the commodity item’s net mass excluding packaging. Net mass does not need to be given
for certain commodities. IDEP informs when net mass does not need to be given.
Currency Code
The invoiced amount is given in Swedish crowns (SEK). If another currency is used, the amount
is automatically converted to SEK in IDEP. Note! The currencies have to be updated every
month. In IDEP it can be done automatically.
Invoice Value SEK
31 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The invoiced value is the invoiced amount for commodities, including costs for freight and
insurance if these are to be included in the invoice according to the terms of delivery. If an
invoice amount is missing, the commodities are reported at the amount, which would have been
invoiced in the event of a normal sale or normal purchase.
The invoiced amount is given in Swedish crowns (SEK). If another currency is used, the amount
is automatically converted to SEK in IDEP. Note! The currencies have
to be updated every month. In IDEP it can be done automatically.
5.2.6.3
Utilities for Manual Return Line Data Entry
Note that the following utilities are provided on the “Return Line” data entry screen.
Pick lists.
When positioned on a field where it is obliged to enter a code, the Arrow Button at the right hand
side of the field can be clicked on, which will present a choice of all possible values. The User
can choose a value from this list by clicking on the desired value.
Copy values of a previously created return line.
When adding a second return line in the same session, it is possible to copy the values of a
previously created return line for the same declaration.
This is possible by using the F6 Key or the “Copy” Button, on the “Return Line” detail screen.
PSI Goods Codes.
The in-house PSI Goods Codes can be used within the package instead of the official CN8 Goods
Code list. It is required to define a relationship between a PSI Goods Code and the corresponding
CN8 Goods Code. Please note the following.





If the User has not (yet) defined any PSI Goods Codes, the field is skipped when using the
TAB key.
If the field Goods Description is given the requirement "Optional and not Sent" by the CNA,
it will be a consult-only field on the line and model screen in the PSI package.
It is possible to connect a Net Mass Calculation Factor to a PSI Goods Code. If this is the
case, the Net Mass is automatically calculated when the number of Supplementary Units is
entered.
If the User entered a PSI Goods Code, but changes the CN8 Code, the PSI Goods Code field
is cleared and the Self-Explanatory Text, or the Additional Goods Code Text (whichever is
applicable) is copied to the Goods Description field.
The Net Mass is not automatically calculated when the Supplementary Units are entered
because the Net Mass Calculation Factor is linked to the PSI Goods Code that has been
cleared.
32 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014

As an exception, only the “large list” for PSI Goods Codes is supported, so the function Key
F2 becomes Alt+F2. Note, that only Valid PSI Goods Codes are presented on the F2 Key and
can be selected in the PSI Goods Codes field in a Return Line. The validity of PSI Goods
Codes is checked at start-up of the package after an upgrade.
33 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Access to CN8.
If the User does not wish to work with PSI Goods Codes, he can find the correct CN8 Goods
Code by the F2 Key on the field CN8 Goods Code.
The User now has access to all the CN8 search facilities, see the CN8 User manual for details
about using the CN8 program.
The User can return the highlighted CN8 Code to the return line data entry screen in IDEP by
pressing <ALT+S> or the “Return this code to IDEP” Button or by double-clicking on the
selected code. The system will ask if the User wants to return the selected value to IDEP or not.
Note that also the Goods Description (the Self-Explanatory Text or Additional Goods Code Text)
is returned (first 140 characters).
Note, that besides the CN8 Goods Codes as found in the CN8 Nomenclature and the above two
special codes, also ranges of codes in “Chapter” 98 and 99 (codes starting with 98 or 99) may be
allowed (as defined by the CNA).
34 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Additional Goods Code.
If required by the National Administration, an Additional Goods Code (“9th digit of the CN8
Code”) may be required. This Code can be Mandatory for certain CN8 Codes, i.e. the User must
select an Additional Code from the list and is not allowed to enter just the CN8 code.
Goods Description.
Also when the User enters the CN8 Code directly (without going to the CN8 package), the
corresponding Self-Explanatory Text, or Additional Goods Code Text (whichever is applicable)
is copied to the Goods Description field.
If the field Goods Description is given the requirement "Optional and not Sent" by the CNA, it
will be a consult-only field on the line and model screen in the PSI package.
Values that may include Decimals.
In some Value fields the User can enter decimals to improve the accuracy. The decimal separator
entered must be the one defined in Windows for that purpose. The User is warned by a Beep if he
tries to enter a wrong separator.
If the User tries to enter a decimal symbol in a Value field where no decimals are allowed, a
message is presented.
Net Mass Calculation Factors.
The User can define a list of Net Mass Calculation Factors in order to calculate the Net Mass (in
Kg) from the value for the number of Supplementary Units or the other way around, see next
paragraph “Supplementary Units”.
If a Net Mass Calculation Factor is attached to a PSI Goods Code that is entered in the line, the
Factor is automatically applied when the number of Supplementary Units is entered.
Supplementary Units.
The field Supplementary Units has a prompt (F2) function and a button. This allows the User to
select a Net Mass Calculation Factor (corresponding to the Supplementary Unit Qualifier of the
CN8 Code). Once the User has entered the Net Mass, the number of Supplementary Units will
be calculated after selection of the Net Mass Calculation Factor: Net Mass / Net Mass Calculation
Factor. The number will be rounded. The calculation is executed once.
If set by the CNA, a warning message is issued if the entered or calculated number of
Supplementary Units is greater than a specific limit in order to avoid great discrepancies.
The length of the Supplementary Units field is defined by the CNA. The User can add a
maximum of 4 decimals to obtain a better precision.
Exchange Rates
35 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The User can define a list of Exchange Rates in order to calculate values in local currency from
the value in foreign currency.
5.2.6.4
Data Entry through Models
Most of the time a PSI has a number of fixed Trading Partners. The transactions for these
Partners will often be very similar with the exception of values and quantities.
In order to avoid entering the same data over and over again, the User can define a number of
Models that already contain the field values which are always the same (e.g. Partner VAT
Number, Partner Country, CN8 Goods Code,...).
The following procedure describes the use of the Line Models.
STEP 1:
When adding a return line from the Return Overview list, press the F9 Key, or
click on the “Model” Button The list of Models defined for the given Flow of the
current PSI is now shown.
STEP 2 :
Select the Model to be used for the data entry of the return line and press Enter or
click OK. All values of the Model will be automatically entered in the return line
fields. The cursor will be positioned on the first entry field of the return line
screen.
5.2.6.5
Copy Lines from another Return
This Section explains the use of the facility to copy lines from one return to another return.
On the Return Overview screen, the Return to copy lines to is selected. Then the “Copy Lines”
function is started via “Actions / Copy” or by clicking on the “Copy” Button or by the SHIFT+F6
Keys. For the selected return, the User can specify the range of return lines he wants to copy into
the new return. By default all the lines are copied.
NOTE: Return lines can be copied from any return (a Flow or Threshold Category other than
the current return), which could mean that too much or too little information is copied,
or codes with validity dates are outside the current range. Therefore a validation process
is carried out. Redundant information is blanked out. Missing or in-correct information
marks the return line as in-correct.
Note that lines can also be copied from one area of the same return to another area.
5.2.6.6
Usage of the Import Function
The Return Lines can be imported for a given return from a file outside IDEP.
36 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The import format (specifying the physical format and logical file layout) has to be defined
before this function can be used.
All lines in an import file have to be related to the same return (i.e. same Statistical Period and
Flow).
The following procedure describes the use of the import function.
STEP 1:
Call the “Import Return Lines” function for the selected return via “Actions /
Import” or by clicking on the “Import” Button or by the F9 Key, on the Modify
Return Overview screen.
The list presents the defined Import Formats for the flow of the return. Select the
name of the Import definition.
STEP 2:
Select the name of the Import file.
The name may refer to a WEB location (a WEB-file):
The name of the web file must start with HTTP//domain/ or FTP://domain/ (thus
HTTPS:// is not supported).
As soon as the minimal required part of a web file name (URL) is entered in the
pathname field (e.g. HTTP://domain/somefile.txt) the field will be marked as
correct (IDEP will not check if the file actually exists).
It will not be possible to browse for such a file using the file selection dialog t
hat is normally used, therefore the following “Specify Path” dialog is skipped.
In the box “Files of Type”, a selection can be made between the default type for
the selected format, or all files. This can be useful if the file doesn’t have the
default extension.
STEP 3:
This STEP is different in case a WEB-based file has been selected. For a “normal”
file, the following procedure applies:
When the path and name of the import file have been selected, the import selection
screen re-appears. If the import format type requires an External Name, i.e. the
name of the database table in Access or the Tab name in Excel format, an
additional field is presented in which this Name can be entered.
The name is pre-set if it was already defined in the import format or if there is
only one table or Tab name found in the given import file.
STEP 4:
This STEP is different in case a WEB-based file has been selected. For a WEBbased file, the following procedure applies:
Once the URL has been entered in the file name field, it will not yet be possible to
present a list of tables (or sheet names) as the file must be downloaded first to be
able to present this list.
37 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
If, in the import dialog, an URL has been typed as file name to import, the browse
button (...) will change into a green ‘GO’ button.
To download the file, simply press this button. If the file could not be downloaded
the URL will be shown in red and a message will be displayed.
As long as the green browse button has not been pressed with success, the OK
button will remain disabled.
If the file could be downloaded (into a temporary file) the browse button (GO)
will assume its normal colour and text and the file name field will be shown as
green. Furthermore, if more information is required to start the import, the
appropriate fields will be enabled. In particular, it will be possible to select an
external name (sheet or table name) as IDEP has downloaded the file and can
access is directly to obtain and validate this information. See STEP 3 for the
selection of the external name for a “normal” file.
STEP 5:
The import process starts after clicking the OK Button. When the data from the
import file is imported into IDEP, every field is validated according to the field
requirements of the Threshold Category of the current return.
When the import process has finished, the import log file can be consulted in
“System / View Import-Log” to see if any error occurred.
NOTES:
For the fields Statistical Value, Invoice Value and Net Mass, automatic
calculation can take place during import, provided that the data is available in the
import file to perform these calculations.
The field CN8 Goods Description, when required, is automatically copied from the
Self Explanatory CN8 text, when the field in the import file is empty.
If values in the User’s import file are provided with decimals and the decimal
separator symbol in the import file differs from the one defined in Windows’
Regional Settings, the import results will be wrong.
For example: the import file uses the comma ‘,’ as a decimal symbol, but in
Windows the dot ‘.’ has been defined. A value of 123,45 will result after import in
a value that is 100 times higher, i.e. 12345.
The IDEP import process will detect this problem and mark imported lines in this
case as Incorrect. However, when these lines are consulted, they will look correct
– only some values will be 100 times too high. The import log file needs to be
consulted in “System / View Import-Log” to see exactly which errors occurred.
When a CN8 Code is imported all spaces are removed from this code. This is done
because in some cases the CN8 Codes used in import files contain spaces that
separate the different CN8 levels.
This behaviour does not apply to the SDF import format.
38 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The value of some fields in a Return Line defines the possible value(s) and other
characteristics of other fields. Examples are Nature of Transaction A, which
defines the possible values of Nature of Transaction B, and Statistical Value
which may control the requirements of other fields in the line.
If during import it is detected that such a field has erroneous contents, the other
(depending) fields available in the import file will be imported anyway (that is,
physically stored in the database). The line as a whole will be marked incorrect,
thus it still needs manual correcting after import.
Once a correct value for the field in error is entered in the line, the relevant and
dependent imported values will appear. These values may however themselves be
incorrect.
When saving the corrected line, the non-required fields will be cleared and not
saved in the database regardless whether the line is correct or not.
If a value to be imported is wrong altogether (e.g. text in a numeric field) it will
not be stored in the database and will not be visible anymore when correcting the
line.
5.2.7 Multi-PSI Import
In addition to importing the lines for one declaration at a time, IDEP/CN8 offers also the
possibility to import the information of multiple PSIs for multiple Statistical Periods and both
Flows in one session.
5.2.8 Modify, Delete or Consult Return Information
Modifying, Deleting or Consulting a return can be related to the header data (the PSI Returns
list), or to the list of return lines (the Return Overview). A return can only be modified or deleted
if it has not yet been approved. Consultation of the return is always possible.
Select the “PSI Returns list” under the Menu option "Return / Edit Returns" or by clicking the
“Edit Returns” Button.
39 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.2.8.1
The Return Header
To “Modify Headers” select the return that has to be modified and use “Actions / Modify
Header”.
Note, that only the fields First Return, Last Return, Flow and the Statistical Period can be
modified. In all other cases, a new Return Header has to be created; the line data may be copied
from the original return using the “Copy” function
To “Delete Headers” select the return that has to be deleted and use “Actions / Delete” or the
“Delete” Button
or the F7 Key.
It is possible to select a range of returns to be deleted, which could be a mix of ‘delete-able’ and
‘non-delete-able’ (already Approved) returns.
To “Consult Headers” select the return that has to be consulted and use “Actions / Header” or the
“Header” Button or the F11 Key.
5.2.8.2
Return Lines
To “Modify Return Lines”, or “Delete Return Lines”, double click on the return that has to be
modified. Instead of double clicking, “Actions / Modify” or the Button “Modify” or the F5 Key
can be used after selecting a return from the list.
The “Return Overview” is now presented in modify mode for that return.

To “Modify Return Lines”, double click on the return line that has to be modified. The
Detailed Return Line screen is presented in modify mode for that line. Instead of double
clicking, the Button “Modify” or the F5 Key or “Actions / Modify” can be used after selecting
a return line from the list. The Buttons “Next” and “Previous” can be used to select other lines
in modify mode, without having to leave the screen. Clicking on the left or right part of these
Buttons will jump to the top respectively the end of the list.
The “Clear All” Button can be used to clear all fields on the screen.

To “Delete Return Lines”, the Button “Delete”
used after selecting a return line from the list.
or the F7 Key or “Actions / Delete” can be
To “Consult Return Lines, “Actions / Consult” or the Button “Consult” or the F6 Key can be used
after selecting a return from the list.
The “Return Overview” is now presented in consult mode for that return.

To “Consult Return Lines”, double click on the return line that has to be consulted. The
Detailed Return Line screen is presented in consult mode for that line. Instead of double
clicking, the Button “Consult” or the F6 Key or “Actions / Consult” can be used after
selecting a return line from the list. The Buttons “Next” and “Previous” can be used to select
other lines in consult mode, without having to leave the screen. Clicking on the left or right
part of these Buttons will jump to the top respectively the end of the list.
40 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.2.8.3
Totals by Reference Overview
When a return is selected on the Return Overview (either in Modify or Consult mode), via the
SHIFT+F7 Key, or the “Totals by Reference” Button or “Actions / Totals by Reference”, an
overview is presented of the total values of the selected return, accumulated by Declarant
Reference Number. This overview enables an easy comparison between the INTRASTAT data
entered and the PSI’s financial administrative data.
This function is only available for detailed return lines, not for aggregated lines.
A sorted presentation on Reference Number can also be made in the detailed return lines
overview, by clicking on the column header of the Reference Number column.
Please note that the sorting is in alphabetical order rather than numerical order. This means that
purely numerical Reference Numbers may not be correctly sorted (1, 2... 10, 11 will be ordered 1,
10, 11... 2, 21 ...).
5.2.8.4
Error Overviews
It is possible that lines containing incorrect values are imported, or lines in which data is missing
are saved. If a return line contains an error, it is marked as incorrect. The User can recognise the
erroneous lines by the flag Correct (Y/N) in the Return Overview (for each line in a declaration)
or the List of Returns (for the whole declaration).
A list of erroneous returns is presented on the “Return / Overview Declarations” screen after
selection of the appropriate check box.
A list of erroneous lines is presented when an erroneous return is selected in the PSI Returns list,
“Modify” or “Consult” is chosen (see above) and the “Error list” option is selected via “Actions /
Errlist” or the “Erroneous Lines” Button or the F8 Key.
Closing this list via the Close Button, Cross Button, Cancel key or “System / Exit”
(CONTROL+F4) will return the list to its “normal” state, i.e. showing all lines.
Correct the lines one by one, in the same way lines without errors would be modified. Once the
line is corrected, it will disappear from the list of erroneous lines. Once all erroneous lines have
been corrected, the return will become correct. The Buttons “Next” and “Previous” can be used to
select other erroneous lines in modify mode, without having to leave the screen. Clicking on the
left or right part of these Buttons will jump to the top respectively the end of the list.
A list of the erroneous lines, including all fields, can be printed or exported to disk in the formats
available for “Draft Output”. This option is found in “Return / Draft Output Returns” or by
clicking on the “Draft Output” Button.
5.2.9 Save Return Line as a Line Model
The function “Save As Line Model” is started via “Actions / Save As Line Model” or by clicking
on the “Save As Line Model” Button or by the F12 Key. The function is only available in the
Detailed Return Line Screen.
41 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
This function will create a model for the Flow of the current Return and save all data entered so
far in the Return Line.
It will prompt for the name and description of the model, this prompt can be cancelled. If an
existing name is entered or selected from the available picklist, it will update the fields of that
line model after confirmation by the user.
5.3 Draft Output Returns
The “Draft Output Returns” function is selected by “Return / Draft Output Returns” or by
clicking the “Draft Output” Button
The draft output functions allow the User to extract a range of returns for a given PSI either on
paper or on disk. Note that this kind of output is only for internal use. It should not be sent to the
CNA ! Draft output includes detailed return lines or aggregated return lines, when the User
checks the appropriate box. Aggregated information is only available for Approved returns. It is
possible to create draft output for erroneous lines only.
It is also possible to invoke “Draft Output Returns” directly from within the Header list by the
“Alt + F11” key or “Actions / Draft Output”. In that case, the range of return numbers (From
Number – To Number) is initialised with the return number range of a selection made in the
Header list (or the current return number if there is only one return selected).
5.3.4 Draft Output Format
This option allows the definition by the PSI of the type of output, for example Text, dBase,
Excel, and the fields to be included in the output. Multiple formats can be defined, which can be
selected at the creation of draft output or erroneous lines output.
5.3.5 Draft Output / Print
This option provides draft output in printed form. The program automatically inserts line breaks
if the fields defined in the format don’t fit on the same line.
All defined Draft Formats can be applied, only the Draft Order is used for the layout.
The User can choose if he wants the information to be printed in portrait or landscape format.
5.3.6 Draft Output / Disk
This option provides draft output on hard disk or diskette.
All defined Draft Formats can be applied.
The User has to specify the filename and path. The specified path must be outside the IDEP/CN8
installation itself (for example in My Documents).
42 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Except for Excel and Access Draft Formats, always two files are created, one file for the selected
headers (prefix “H_”) and another file for the return lines corresponding to the selected headers
(prefix “L_”). The prefixes are automatically assigned.
For Excel one spreadsheet is created with TABs Headerlist and Linelist, for Access one database
is created with Tables Headerlist and Linelist.
Note, that if the User selects the Draft Format “HTML”, it is only possible to create draft output
for one declaration.
If the User defines an existing filename, it will be overwritten after confirmation.
5.4 INTRASTAT Output Returns
This function allows the User to create the official declaration for the CNA.
The medium the User is allowed to use to send the official output by (diskette, telecom, e-mail) is
determined by the CNA. The User can restrict the allowed official output to the default type used
by his Company in the “System \ Administrative Parameters” screen.
INTRASTAT output can be processed for the current PSI, or in the case of a Third Declarant for
all PSI's at once.
The process of generating INTRASTAT output consists of two steps.
1. Approval of the returns ready for INTRASTAT output.
2. Generation of the INTRASTAT output.
5.4.4 Return Approval / Disapproval
To create the official output the User must first approve the declaration(s) concerned.
In the list of “PSI Returns”, the declaration(s) to be approved must be selected.
It is possible to select a range of declarations to be approved, which could be a mix of
‘approvable’ and ‘non-approvable’ declarations.
A Third Declarant has the possibility to invoke the “Approve All” function which approves all
eligible declarations for all PSIs. In Denmark this function is available for PSIs as well.
The function “Approve” is executed via “Actions / Approve” or by clicking the “Approve” button
or by the F8 key.
If a range is selected the eligible declarations will be approved.
If a declaration contains many lines, approving may take some time; a progress bar will therefore
be shown.
If a range of returns is being approved, a confirmation message will be issued for each return
being processed. Error messages will be suppressed that are not very meaningful.
43 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
In the list of “PSI returns” the flag “Return Approved” is now set to Yes for the return(s)
concerned.
For Third Declarants, the function “Approve All” is executed via “Actions / Approve All”
(available when PSI Returns overview is selected) or via “Parties / Approve All” (always
available). A confirmation is requested from the User. This function will approve all eligible
declarations for all PSIs. If Approval is not possible, for example because a declaration is already
approved or it contains errors, the declaration concerned is silently skipped. However, the usual
warnings will be issued. The “Approve All” function works exactly as if the User had manually
selected a PSI, selected all its declarations in the PSI Returns overview and then had called
“Approve” manually. The function does this automatically for all PSIs (therefore a lot of things
happen on the screen). At the end of the process, a summary will be shown.
After approval the user can of course consult thePSI Returns overview to see which returns have
or have not been approved. One can filter on correct and sort on approval status to visualise all
returns that still need approving.
Note the following points:









A return can only be approved if it does not contain any errors (“Correct” = Yes).
If a correct return is approved which contains no lines, the following cases exist:
It is a Delete or a NULL return (if allowed by the CNA) in which case the return is approved;
It is a normal return and NULL returns are allowed; in this case the return is not approved but
the User will be asked to create a NULL return instead;
It is a normal return and NULL returns are not allowed; one of the following cases is
possible:
The CNA allows normal returns without lines and the return is approved;
The CNA doesn’t allow normal returns without lines in which case a message is presented
and the return is not approved.
The User can approve more than one return (one at the time) if he wants to include multiple
returns in one INTRASTAT interchange.
A return cannot be modified anymore once it has been approved. If however the User still
wants to modify information for that return, he has to use the function “Disapprove” which is
executed via “Actions / Disapprove” or by clicking the “Disapprove” button or by the F8 key.
It is possible to select a range of declarations to be disapproved, which could be a mix of
‘disapprovable’ and ‘non-disapprovable’ declarations.
Error messages will be suppressed that are not very meaningful. For example when
disapproving a range of declarations, IDEP would normally complain that a Sent declaration
cannot be disapproved. Such messages will be suppressed, but only if a multiple selection is
being processed.
After approval or disapproval, if enabled by the CNA, the total Invoice or Statistical Values
for the current year are updated in the PSI detail screen. A warning is presented if the
44 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
maximum value for the Threshold Category is exceeded and the PSI is informed to switch to
a more detailed category.
5.4.5 Aggregated Data
If the CNA requests aggregated information, return lines will be available in both detailed (as
entered by the User) and aggregated form once the return is approved.
This means that the numeric values of return lines with the same code values, such as CN8 Code,
Partner Country, etc. are accumulated into one aggregated line (e.g. a return of 100 return lines
can be reduced to an aggregated return with 30 return lines).
After Approval and aggregation, the User can choose to either consult the aggregated information
or the detailed information.
To “Consult Return Lines”, “Actions / Consult” or the Button “Consult” or the F6 Key can be
used after selecting a return from the list. The User will be asked if he wants to consult
Aggregated or Detailed Return Lines.
The “Return Overview” is now presented in consult mode for the aggregated or detailed lines of
that return.
 To “Consult Return Lines”, double click on the return line that has to be consulted. The
detailed or aggregated return line screen is presented in consult mode for that line. Instead of
double clicking, the Button “Consult”or the F6 Key or “Actions / Consult” can be used after
selecting a return line from the list.
When the User consults an aggregated return line, he will see that only the fields which are sent
to the CNA have values (not the fields that are optional).
Press Escape, or click on Close, to return to the list of aggregated lines.
Special remarks on aggregation.
When aggregation is carried out, the aggregated Net Mass values, Invoice Values in Foreign
Currency and Statistical Values in Foreign Currency are rounded to integers (scientific
rounding: 0.5 becomes 1, 0.4 becomes 0).
45 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.4.6 Generate INTRASTAT Output
The “Generate INTRASTAT Output” function is selected by “Return / INTRASTAT Output
Returns” or by clicking the “INTRASTAT Output” Button
It is also possible to invoke “Generate INTRASTAT Output” directly from within the Header
list by the “Alt + F10” key or “Actions / INTRASTAT Output Returns”. In that case, the range of
return numbers (From Number – To Number) is initialised with the return number range of a
selection made in the Header list (or the current return number if there is only one return
selected).
The official output will process (on diskette, by e-mail or by telecom) all approved returns within
the selected range. Processed declarations will be locked and can not be modified anymore.
For all output types applies:
 The output file is encrypted.
The selected output will become the default.
If there's just one output option in Intrastat Output it is automatically pre-selected.
t correctly configured, the corresponding Output option is greyed.
If “Generate INTRASTAT Output” is invoked from within the Header list, two option buttons
on the right hand side of the dialog appear (see picture below). These buttons are “All List
Entries” and “Select Returns”.
Clicking on “Select Returns” will take the current header selection from the Header list to fill in
the range fields “From Number” “To Number”. Clicking “All List Entries” will fill in the default
range 1-999999 in the range fields.
“From Number” “To Number” allows to manually select a range of Returns. Clicking on the
arrow buttons will present a list of approved declarations (ready to be sent).
46 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.4.6.1
E-mail
When using the “E-mail” option to make the official output, a file will be created that will be put
under the directory the User has defined in “Administrative parameters”
The unique filename is composed of the PSI identification or the TPD identification, combined
with the interchange number, as shown in the Message.
Once the file is created, depending on the User’s E-mail Settings, it will either:


Have to be processed manually by the User by attaching it to an e-mail message for the CNA.
After sending the output file has to be deleted manually.
Be processed automatically by IDEP. After successful sending, the file will be deleted. If
IDEP had to connect to the Internet in order to send the file, it will disconnect afterwards.
If the “Automatic E-mail” function is disabled by the CNA, but the e-mail output is allowed, an
output file to be send manually will be created.
The filename can always be consulted in the “Telecom Log”
5.4.6.2
Returns just sent
After transfer to diskette, via telecommunications or e-mail, of the INTRASTAT declaration, an
overview of the Returns just Sent is automatically presented on the screen. To leave this
overview, click the Close button, or use the Esc key.
If the non-Automatic e-mail output option was used and the CNA has provided the possibility to
open an e-mail message, a message is presented that includes instructions on how to perform this.
The message includes the file name and location where the output file is found. A Button “Create
an E-mail message” is available. could provide a “mailto:” e-mail address.
If for some reason (e.g. damage or loss of diskette, telecommunication problems) the User has
lost the information to be sent to the CNA, he can use the “Unlock” function via “Actions /
Unlock” or the “Unlock” Button or the F9 Key to re-use the declaration. Then he will have to
start the official output process again.
It is possible to select a range of declarations to be “Unlocked”, which could be a mix of
‘Unlockable’ and ‘non-Unlockable’ declarations.
5.4.7 INTRASTAT Output / All PSI's (Third Declarants only)
The “INTRASTAT Output / All PSI’s” function is selected by “Return / INTRASTAT Output
Returns” or by clicking the “INTRASTAT Output” Button and then selecting the Radio Button All
PSI’s, if the system is set up for a Third Declarant. The Third Declarant can choose between
All PSI’s and Current PSI; All PSI’s is the default selection.
However, if the “INTRASTAT output” is invoked directly from the Header list the “Select
Returns” option is the default and the range is pre-set with the selection in the Header list.
47 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Clicking on “Select Returns” will take the current header selection from the Header list to fill in
the range fields “From Number” “To Number”. Clicking “Current PSI” will fill in the default
range 1-999999 in the range fields.
The process of generating INTRASTAT Output for All PSI’s is identical to that for One PSI.
However, no range of Returns can be entered, as this range would be different for each PSI.
Third Declarants can approve one or more declarations for one or more PSI's and all approved
declarations for all PSI's will be automatically processed in the official output.
For a Third Declarant, the “Overview Declarations” screen allows the presentation of all
declarations for all PSI’s that are “Approved”.
5.5 Telecom Log
The “Telecom Log” function is selected by “Return / Telecom Log”.
A log is kept of all the interchanges sent to the CNA by any means and the messages they
contain. The User can consult this log under the Menu option “Return / Telecom Log”.
48 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The ‘Mnemonic’ column merely shows the type of output used. The possible values are:
 Output on disk (non-automatic e-mail);
 SMTP Email;
 MAPI Email;
The success or failure of this particular output is indicated in the ‘Correct’ column.
The ‘Output’ column shows the file name (without path information) of the file sent output the
media shown in the ‘Mnemonic’ column.
The column ‘Info’ contains the value of the Telecom Output path, Email address, depending on
the output media.
After selecting an interchange, by “Actions / Consult” or the “Consult” Button or the F6 Key or
by double Clicking on the interchange, the User will see a list of the messages in the interchange.
One message corresponds to one return, for a given PSI. The most essential data of the selected
return is presented. This information corresponds to that shown in the “Returns Just Sent”
overview that is shown immediately after performing the Official Output.
49 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
5.6 Overview Declarations
The “Overview Declarations” function is selected by “Return / Overview Declarations” or by
clicking the “Return Overview” Button.
The check boxes allow the application of selection criteria for the presentation of the list. By
clicking on combinations of check boxes, the presentation criteria are narrowed.
For Third Declarants, the overview presents the declarations of all PSI’s.
Third Declarants can easily switch to the PSI Returns overview of each PSI by selecting a
declaration of the PSI in question and either Double Click on the declaration or Click on the
Button “Change Current PSI”.
5.7 Report
Four kinds of reports can be obtained. All of these reports provide information about the total
statistical and invoice value for a PSI, over a certain period.
50 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
A report can be “previewed” on the screen. If you wish to make a hardcopy on paper, click on the
Button “Print”.
The four report types are the following.
1. Report by Partner Country.
This option will give you a report for the selected Partner Country per Goods Code of a given
PSI, showing all totals for the specified flow, over the specified time interval.
2. Report of Totals for a PSI.
This report presents for the selected PSI, over the specified time interval and Return Flow, the
Total Invoice Value and Total Statistical Value for each Statistical Period within the time
interval.
3. Report by Goods Code.
This option will give you a report for the selected Goods Code per Partner Country of a given
PSI, showing all totals for the specified flow, over the specified time interval.
PSI, showing all totals for the specified flow, over the specified time interval.
4. Report on Transactions by Partners.
This report presents, over the specified time interval, for each declaration which has the selected
Trade Partner (from the list of Trade Partners) in at least one of the lines:
 In the first column the Declarant Reference Number. All transactions are grouped (and
sorted) by this item.
 The following columns contain per declarant reference number: Return Number, Return
Period, Invoice Value and Statistical Value (the latter only if applicable).
If a Trade Partner is not applicable, the “per Trade Partner” criterion is dropped. This can either
be because no Trade Partners are required for the selected flow (Arrival) or because the Trade
Partner’s field is disabled.
The Partner VAT selection field will be hidden if it is not applicable (for flow Arrival or not
applicable in any threshold).
5.8 End
This option closes the program and returns to the Login (splash) screen, where the User can select
another option or program, or choose to leave the package.
It is also possible to close IDEP by clicking on the top right-hand cross.
This could however also stop IDEP when it’s in the middle of a lengthy operation (the “End”
option is disabled in that case) which could leave IDEP in a state in which it can’t be run
anymore.
51 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
- When IDEP is executing maintenance functions,
- When IDEP is executing certain operations, for example Official output,
- If a progress bar is visible,
it is possible to stop IDEP in an “irregular” way only after double confirmation by the User.
It is of course not recommended at all to quit IDEP while an operation is in progress! Only
confirm the “Operation in progress” message if you have encountered an error #32 during a
lengthy operation.
52 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
6. Actions
The “Actions” Menu option is disabled when the package is started for the first time. It becomes
active when another Menu option is selected and then shows all possible actions in the current
conditions.
The same options become available as those buttons in the context dependent buttons area.
Holding down the right mouse button anywhere on the screen presents the User with the Actions
Menu.
53 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
7. PSI INFO
The Menu PSI Info is related to functions which are used for the maintenance of data which are
PSI specific (i.e. data that for every PSI, defined in the system, has his own set).
Every PSI can have his own set of functionality as follows.
 Net Mass Calculation Factors: for calculation of the Net Mass.
 Line Models: for quick manual data entry.
 Good Codes: internal codes can be used instead of the official CN8 Codes.
A Search field is provided for each of these tables in which the cursor is automatically
positioned.The characters in the Name field of each table can be modified into Upper or Lower
case afterwards, for example one can change “MYGOODS” into “MyGoods”.
Information entered for one PSI can be copied to another PSI at the time of creation, or
afterwards using the option:
 PSI Info / Copy PSI Information.
7.1 Net Mass Calculation Factors
The “Net Mass Calculation Factors” function is selected by “PSI Info / Net Mass Calculation
Factors” or by clicking the “Net Mass Calculation Factors” Button.
Net Mass Calculation Factors are used to:
 Calculate the Net Mass from the product of the number of Supplementary Units and the
Factor defined in the Net Mass Calculation Factor selected by the User, when the focus is on
the Net Mass field
 Calculate the number of Supplementary Units from the Net Mass by dividing the Net Mass by
the Net Mass Calculation Factor and rounding the result, when the focus is on the
Supplementary Units field.
7.1.4 Specifying Net Mass Calculation Factors
This function allows the User to define conversion factors in order to calculate the Net Mass from
the value supplied for the Supplementary Units and vice versa.
The function “Add Net Mass Calculation Factors” is started in “PSI Info / Net Mass Calculation
Factors” via “Actions / Add” or by clicking the “Add” button
or by the F4 key.
The function “Modify Net Mass Calculation Factors” is started in “PSI Info / Net Mass
Calculation Factors” by double clicking on the Net Mass Calculation Factor or via “Actions /
Modify” or by clicking the “Modify” Button or by the F5 key.
The Supplementary Unit Qualifier is selected from the list of qualifiers defined in the Combined
Nomenclature. The Supplementary Unit Qualifier may be presented in its generic format, for
example “p/st”, or in a translated form, for example “Per Piece” if this is supplied by the CNA.
54 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Note, that it is possible to enter Net Mass Calculation Factors for the qualifier “-“, which means:
No Supplementary Unit Qualifier. These Factors are applied in a special manner, as shown in the
next Section.
The number of significant digits for entering the Factor is 8.
If many significant decimal digits are used, the User should not use a large number in the integer
part of the Factor (e.g. 9999.00000011 will be automatically rounded to 9999, whereas
0.00000001 will remain 0.00000001).
Note that very small values will be displayed in ‘scientific’ notation in the net mass calculation
factor list (e.g. 1E-8 in stead of 0.00000001 meaning 10 to the power minus 8).
7.1.5 Usage of Net Mass Calculation Factors
The Net Mass Calculation Factors are used to calculate the Net Mass from the Supplementary
Units and vice versa.
The User can call this function by pressing F2 on the field Net Mass after entering the number of
Supplementary Units, for calculation of the Net Mass, or on the field Supplementary Units after
entering the Net Mass, for calculation of the number of Supplementary Units.
This can be done:


On the return line data entry screen.
On the return line Model data entry screen.
The list of Net Mass Calculation Factors that is shown, depends on the Supplementary Unit
Qualifier of the CN8 Goods Code that is entered. Only the Factors with the corresponding
Qualifier are shown.
Pressing F2 on the Net Mass field, presents a Factor selection list containing only the entries that
have “p/st “ as a Supplementary Unit Qualifier.
The Net Mass on the “Return line” and the “Line Model” data entry screen is then calculated as
follows.
Net Mass = Supplementary Units * <Calculation Factor selected from the table>.
When no Supplementary Unit Qualifier is attached to the CN8 Code entered, then the
Supplementary Units cannot be entered in the Return line or Line Model. When a Net Mass
Calculation Factor defined for the “-“ Qualifier is applied on the field Net Mass, no
multiplication is done but the Factor is copied into the Net Mass field (as if the number of
Supplementary Units was 1).
Note:
55 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
A Net Mass Calculation Factor can be connected to a PSI Goods Code. This allows IDEP to
calculate the Net Mass automatically when the number of Supplementary Units is entered and a
PSI Goods Code is used in a Return Line or a Line Model, that specifies a Net Mass Calculation
Factor. This automatic calculation is also done during Return Line import.
To calculate the number of Supplementary Units from the Net Mass, the same procedure as
described above is followed with the focus on the Supplementary Units field. The calculation
done is:
Supplementary Units = Rounded value of (Net Mass / <Calculation Factor selected
from the table>).
7.2 Line Models
The “Line Models” function is selected by “PSI Info / Line Models” or by clicking the “Line
Models” Button.
Most of the time a PSI has a number of fixed Trading Partners. The transactions for these Trading
Partners will very often be similar except for values and quantities.
In order to avoid entering the same data over and over again, field by field, for every return line,
the User can define a number of Models that already contain the field values which are always
the same (e.g. Partner VAT Number, Partner Country, CN8 Goods Code,...).
7.2.4 Specifying Line Models
The function “Add Line Models” is started in “PSI Info / Line Models” via “Actions / Add” or by
clicking the “Add”
button or by the F4 key.
The function “Modify Line Models” is started in “PSI Info / Line Models” by double clicking on
the Line Model or via “Actions / Modify” or by clicking the “Modify” Button or by the F5 key.
Line Models are created for a specific Flow: Arrival or Dispatch. Some fields in a return line are
only applicable for Arrival or Dispatch. Also, the field requirements in a return line may differ
significantly if the PSI uses different Threshold Categories for Arrivals and Dispatches.
When entering data in a Model, the same utilities are available as for return lines. There are
however, three extra fields on the Model data entry screen.


Model Name, to uniquely identify the Model.
Model Description.
If the User has a long list of Models, the search facility can be useful if the Model Name he
wishes to access is known. Just type the first letters of the name of the Model and the cursor will
jump automatically to that Model.
56 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
7.2.5 Usage of Line Models
When adding a return line, the User can select a Model via “Actions / Model” or by clicking the
“Line Model” Button.
The values of the Model will be automatically entered in the return line fields when the User
clicks on OK after selecting the Model he wishes to apply from the list.
7.3 PSI Goods Codes
The “PSI Goods Codes” function is selected by “PSI Info / Goods Codes” or by clicking the
“Goods Codes” Button
The PSI can use his own PSI Goods Code list instead of the official CN8 Goods Code list. The
Goods Codes facility connects this PSI defined Goods Code to the official CN8 Goods Code.
If the User has a long list of PSI Goods Codes, the search facility can be useful if he knows the
PSI Goods Code he wishes to access. Just type the first letters of the PSI Goods Code and the
first PSI Goods Code of which the identification starts with these characters will be selected.
By clicking on the column header “PSI Goods Code” or “CN8 Goods Code” the list is sorted by
the PSI Goods Code name respectively by the CN8 Code.
7.3.4 Specifying PSI Goods Codes
The function “Add PSI Goods Codes” is started in “PSI Info / Goods Codes” via “Actions / Add”
or by clicking the “Add” button
or by the F4 key.
The function “Modify PSI Goods Codes” is started in “PSI Info / Goods Codes” by double
clicking on the Goods Code or via “Actions / Modify” or by clicking the “Modify” Button or by
the F5 key.
The Goods Description is automatically copied from the CN8 Self-Explanatory Texts, or
Additional Goods Code Text, when the CN8 Goods Code is entered.
The PSI Goods Code list can be imported from outside IDEP. The “Import PSI Goods Codes”
function is called from the Goods Codes screen via “Actions / Import” or by clicking the
“Import” Button or by the F9 key.
In the import format, it is possible to define the Net Mass Calculation Factor. If a name is given
in the import file, it must exist in the corresponding Table.
The PSI Goods Code list can also be exported to a file. The “Export PSI Goods Codes” function
is called from the Goods Codes screen via “Actions / Export” or by clicking the “Export” Button
or by the Control+F9 key.
57 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Possible output formats are MS Access, MS Excel, CSV and Text TAB. The output format is
selected by choosing the appropriate extension in the “Save As” function of the output file
selection. The formats and their related extensions are:
MS Access: MDB, MS Excel: XLS, Text CSV: CSV and Text TAB: TXT.
The whole list is exported, the Field Order is fixed.
After entry of the CN8 Code, the Supplementary Unit Qualifier is presented including (if
applicable) a field for the selection of the Additional Goods Code and a field for the selection of a
Net Mass Calculation Factor. The Supplementary Unit Qualifier may be presented in its generic
format, for example “p/st”, or in a translated form, for example “Per Piece” if this is supplied by
the CNA.
Only the Net Mass Calculation Factors with the same Supplementary Unit Qualifier as the CN8
Code are displayed on the list. The Factor specified, will automatically be applied to the Return
line or Line Model when the particular PSI Goods Code is selected to calculate the Net Mass.
Clicking the column header “Correct” sorts on validity, showing all the correct PSI Goods Codes
first and the incorrect ones at the end.
7.3.5 Usage of PSI Goods Codes
The “PSI Goods Codes” function is used during data entry in the following functions.


On the Return line and Line Model data entry screen, on the field PSI Goods Code using F2.
When importing return lines. A PSI Goods Code which is imported is validated against the
list of PSI Goods Codes. The data (CN8 Code, Additional Goods Code, Goods Description,
Net Mass Calculation Factor) is taken from the first valid PSI Goods Code in the list.
The CN8 Code and its associated data will be automatically entered after selecting the PSI Goods
Code from the list.
If there is a Net Mass Calculation Factor connected to the selected PSI Goods Code, the Net
Mass is calculated automatically after the Supplementary Units are entered. This is also done
during import of the return data.
Note the concept of validity dates.
CN8 Goods Codes are only valid between a given start year and a given end year.
The validity dates that are associated with a CN8 Goods Code are assigned to the PSI Goods
Code once the CN8 Goods Code has been entered.
If the User logs on to the package for a year different than his previous logon year, then all the
PSI Goods Codes are checked for their validity dates. PSI Goods Codes that are correct (status
Correct = Y), are checked for their validity dates. If the logon date is outside the range of validity
dates, then the PSI Goods Code is marked with an asterisk (*), which means that the code is not
valid for that logon period.
58 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
7.3.6 Checking validity of Goods Codes
Only Valid PSI Goods Codes are presented on the F2 Key and can be selected in the PSI Goods
Codes field in a Return Line. The validity of PSI Goods Codes is checked at start-up of the
package after an upgrade.
In a 2-year package, the validity is set as follows:
 CN8 Code doesn’t exist in both years: “Invalid”. The User needs to find another CN8 Code
for this product.
 CN8 Code exists in both years: “Valid”.
 CN8 Code exists in new year but not in the previous: “Valid”. Note however, that if this PSI
Goods Code is used for a declaration of the previous year, the CN8 Code will be invalid.
 CN8 Code exists in the previous but not in the new year, the User needs to find the correct
CN8 Code for the new year:
 In the List of PSI Goods Codes the column “Validate” shows these codes.
 In the “Modify PSI Goods Code” screen the indication “Validate” is shown.
Note, that if this PSI Goods Code is used for a declaration of the new year, the CN8 Code will
be invalid.
In a 1-year package only the first two apply.
7.4 Copy PSI Information
The “Copy PSI Information” function is selected by “PSI Info / Copy PSI Information”.
This option allows the User to copy the PSI dependent tables from one PSI to the current PSI.



Net Mass calculation factors table.
PSI Goods Code table.
Arrival and dispatch Models table.
When creating a new PSI the same function is available.
The check box Discard Duplicates allows the User to copy only the information from another PSI
that is not yet available in his own PSI tables. This function is only available when copying the
tables to an existing PSI, as a new PSI still has empty tables and duplicates can not occur.
If the target list is empty, the following cases exist for copying:
1. The 'Discard Duplicates' switch is on:
"incorrect" entries in the source list are discarded, if they are duplicates in the source list. Other
"correct" or "incorrect" entries are copied to the destination list.
2. The 'Discard Duplicates' switch is off:
All "correct" or "incorrect" entries are copied from the source to the target list.
59 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
If the target list is not empty, the following cases exist:
1. The 'Discard Duplicates' switch is on:
"incorrect" entries in the source list are discarded, if they are duplicates in the source list. Other
"correct" or "incorrect" entries are copied to the destination list, under the following condition:
If an entry from the source list already exists in the target list, IDEP will not copy it. This will
avoid introducing *new* duplicates. However, if a "correct" entry from the source list already
exists in the target list as an "incorrect" entry, its data is copied to the "incorrect" entry in the
source list.
If the destination list already contains duplicates these will remain.
2. The 'Discard Duplicates' switch is off:
"incorrect" entries in the source list are discarded, if they are duplicates in the source list. Other
"correct" or "incorrect" entries are copied to the destination list, under the following condition: if
a "correct" entry from the source list already exists in the target list as an "incorrect" entry, its
data is copied to the "incorrect" entry in the source list.
60 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
8. PARTIES
This Menu deals with the different parties involved in the system.





Providers of Statistical Information, “PSI’s”. IDEP can handle any number of PSI’s, either as
independent entities or under the umbrella of a Third Party Declarant.
“Users”, who are given certain rights to create, change or consult the PSI’s data, to modify
system parameters or to perform system functions.
“Third Party Declarants”, who create INTRASTAT declarations for a number of PSI’s.
Third Party Declarants have an additional function “Approve All”which is also available from
the “Actions” Menu in case the PSI Returns overview is presented.
The “Change current PSI” option allows to select and work for another PSI defined in the
system.
8.1 PSI's
Before you start to register for the first time, you need to submit information about your
organisation.

Fill in the information requested on the screen: ’Add – PSI Parameters’. If you do not see a
request this information on your screen, you can arrive there via the menu alternative
´Parties / PSIs ´. Then click the button in the tool field (or ’Steps / Add’ or F4).
Obligatory information:
TDP or PSI ID.: Fill in corporate registration number and supplementary numbers in
succession (12 characters). Important! For reporting on main level, please fill in '00' as
supplementary number. This applies if you have not submitted a request to Statistics Sweden
to report on sub-levels. (For example '01', '02', '03' etc.).
PSI Name: The name of your organisation.
Contact Person: Fill in your name.
Telephone Nr.: Fill in your telephone number.
E-mail Address: Fill in your email address. The reply message is sent to this address if the
return is sent via web upload.
Threshold Cat. Arrival: Fill in '1' if applicable, or '0' if not applicable.
Threshold Cat. Dispatch: Fill in '1' if applicable, or '0' if not applicable.
61 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
8.2 Users
The “Users” function is selected by “Parties / Users” or by clicking the “Users” Button
8.2.4 Create / Modify a User
This screen allows the definition or modification of different Users, with different authorisations.
If there is only one User of the package, he can always work with the default User called "IDEP",
and the rest of this Section is of no further interest to him.
The function “Add Users” is started in “Parties / Users” via “Actions / Add” or by clicking the
“Add” button
or by the F4 key.
The function “Modify Users” is started in “Parties / Users” by double clicking on the User’s
Identification or via “Actions / Modify” or by clicking the “Modify” Button or by the F5 key.
Now the User can be defined by filling in all the data that is requested.
Mandatory fields to be entered are as follows.
 User ID, the name used on the Login screen.
 Password, the password requested on the Login screen.
 Supervisor, if Yes this User has access to all functions. If No his access is restricted to those
functions required to create declarations.
 Modify, if Yes, this User is allowed to use Add / Modify on the functions he is allowed to
access. If No, he can only Consult them.
Optional fields are as follows.
 User Name.
 Contact Number, Department, Function.
 Default PSI ID, if a User often makes declarations for the same PSI, he can fill in the field by
selecting a PSI from the pick list. When the User logs on to IDEP, he will immediately have
this PSI as his current PSI.
8.2.5 Types of Users
Users can be limited in their access rights to Functions and / or in their rights to Modify data.
There are two types of Functions as follows.
1. Functions accessible to every User defined in the system.
62 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
2. Functions specific to the Supervisor. These are functions related to the maintenance of
sensitive information (e.g. defining Users and their authorisations, creating PSI's, setting
system parameters, ...) and functions related to the responsibilities for the correctness of the
statistical information (e.g. approving a return).
Combining these Types of Functions with the Modify property, four Types of Users are defined
as follows.
1. Supervisor with Modify authority (= the default User IDEP). This User can perform all
functions in the package.
2. Normal User with Modify authority. This User can perform the functions for every User, but
not the Supervisor functions. He can Consult the Supervisor functions.
Normal User without Modify authority. This User can Consult the functions for every User
(function type 1. above).
8.3 Third Party Declarant
Note: This point is only of interest to a Third Declarant.
The “Third Party Declarant” function is selected by “Parties / Third Party Declarant”.
With this function a Third Declarant can enter his Identification data.
Third Party Declarants have an additional function “Approve All” which is also available from
the “Actions” Menu in case the PSI Returns overview is presented.
8.4 Change current PSI
The “Change current PSI” function is selected by “Parties / Change current PSI” or by clicking
the “Change current PSI” Button.
The User always works with data from one PSI at a time (except in case of a Third Declarant who
is producing INTRASTAT output for all PSI's, or archiving returns for all PSI's).
To change from one PSI to another, simply select the PSI that must become the default from the
list of PSI’s by clicking on it and then clicking on the OK button (or by double clicking on this
PSI). All the information related to that PSI is now active (i.e. the returns, all information under
the Menu option "PSI Info").
63 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
9. Import
9.1 Format
The “Import Format” function is selected by “Import / Format”.
IDEP provides Users interfaces to allow import of Complete Returns, Return lines, PSI Goods
Codes and Exchange Rates.
The purpose of the import facility is to avoid double data entry when using other applications that
already contain the necessary information.
The import functionality is supported by two functions.
1. A function to specify the import format.
Multiple physical import formats are supported. The logical file layout (field order, field
length,..) can also be defined by the User.
All defined import formats are available to all PSIs.
2. A function to perform the actual import.
Once the User has defined the import formats, they can be used each time the import facility
is called (on the Return lines, PSI Goods Codes or Exchange Rates list or through the
Menu option “Import / Multi-PSI Import”).
Both functions are explained in the following Sections.
9.1.4 Specifying the Import Format
The function “Add Import Format” is started in “Import / Format” via “Actions / Add” or by
clicking the “Add” button
or by the F4 key.
The function “Modify Import Format” is started in “Import / Format” by double clicking on the
Import Format or via “Actions / Modify” or by clicking the “Modify” Button or by the F5 key.
Note: The specification of the import format is explained for Return lines. Setting the import
format for the other import types (PSI Goods Codes, , Exchange Rates) is very similar.
64 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Select the Menu option "Import / Format”. The overview of available formats is presented.
Defining a new Import Format will allow the User to specify the Type of Import for which the
format is intended (i.e. Returns, Return Lines, PSI Goods Codes, , Exchange Rates) and the
physical format (Access, dBase, Text and Excel). Furthermore, the User can specify the default
name and location (if there is one) of the file containing the import data.
65 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The following fields are mandatory:
 The Name of the Import format, used for identification when the actual import action is
performed. Note, that for technical reasons a single quote “ ’ ” will be replaced by “ ` ”.
 The Type of Import Format, i.e. Return Lines Arrival, Return Lines Dispatch, Lines MultiPSI, , PSI Goods Codes, Exchange Rates.
 The Import Format, i.e. the physical structure such as different Text formats, dBase, Excel,
MS Access.
 For Return Lines: the Goods Code Mode, identifying if the CN8 Code or the User defined
PSI Goods Code is used in the import file.
 If the value = PSI Goods Code, the system expects the PSI Goods Codes in the import file.
An automatic translation will be done to the CN8 Codes, based on the PSI Goods Code table.
If the PSI Goods Code includes a reference to a Net Mass Calculation Factor, then the Net
Mass is automatically calculated during import.
 If the value = CN8, the system expects the CN8 Goods Codes in the import file.
 For Exchange Rates: the Currency Indicator, identifying if the rates in the import file are
expressed in the Euro or the Local currency.
 For certain Import Formats (for example Excel) it must be specified if the Import file includes
Column Headers or not. If it does, the field Rows to Skip appears which defines the number
of irrelevant rows. It is pre-set on ‘1’.
 For CSV Import Format, the field Delimiter, default a comma, must be given.
 For all Text formats, i.e. CSV, SDF and TAB, it must be indicated if the Import file uses the
ANSII character set or not. It is recommended to keep this field on its pre-set value, unless it
66 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
appears that the import procedure doesn’t recognise certain special characters in text fields,
for example the Danish characters å, æ and ø.
The following fields are optional:



Description, used for the User’s own identification of the format.
Path Name, the default name and location of the import file for this Import Format Definition.
The Path Name may refer to a WEB location (a WEB-file):
The name of the web file must start with HTTP//domain/ or FTP://domain/ (thus HTTPS:// is
not supported).
As soon as the minimal required part of a web file name (URL) is entered in the pathname
field (e.g. HTTP://domain/somefile.txt) the field will be marked as correct (IDEP will not
check if the file actually exists).
It will not be possible to browse for such a file using the file selection dialog that is normally
used.
External Name, to specify the default name of the table in a database (for example in Access)
or the name of the Worksheet in a spreadsheet (for example in Excel). If there is only one
table or Worksheet name found in the given import file, its name is automatically pre-set.
If the Path Name or External Name are not set here by default, they must be entered when the
actual Import is performed. The default can always be overruled when the Import is performed.
Now specify the logical file layout (order of fields in the file to be imported, lengths etc.) for the
physical format that has just been selected.
Then the layout of the import file can be customised according to the User’s needs. Fields can be
moved to another position by changing the Order (enter or use the arrow buttons), or put on
Order “0” if they are not included in the import file. The “Clear All” button sets the Order of all
fields to “0”. Only the fields that are requested by the CNA in any Threshold Category are
shown.
After an upgrade of the IDEP package, the Import Formats will be checked and adjusted if
necessary to reflect changes made by the CNA in the field requirements. Unused fields are
discarded, new fields will be added with an Order of ‘0’ and a field length as determined by the
CNA. Any fields with order ‘-1’ will be deleted. Import Formats that match exactly one of the
template formats defined by the CNA are deleted.
9.1.5 Usage of the Import Function
The functionality is similar for Return Lines, PSI Goods Codes and Exchange Rates.
The import function is called by “Actions / Import” or by clicking the “Import” Button or by the
F9 Key on the following lists:
 The import function for Return lines is called from the Return Overview list.
 The import function for PSI Goods Codes is called from the PSI Goods Codes list.
67 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014

The import function for Exchange Rates is called from the Exchange Rates list.
The “Lines Multi-PSI” import function is called by “Import / Multi-PSI Import”.
9.1.6 Draft Order
Draft Output is a means for the User to check his declaration before producing the INTRASTAT
output. The User can add his own Draft Order definition in the same way as described above for
the Import Formats, by selecting Draft Print Order in the field Type of Format. Which fields
appear on the printout or the output on disk is defined by by the CNA.
9.2 Multi-PSI Import
For a good understanding of the “Multi-PSI Import” function, please read first the description of
the normal “Return Line Import” function, used to import Return Lines for one single
Declaration.
“Multi-PSI Import” allows the User to perform a single import function for different declarations
(Statistical Periods and Flows) and different PSIs.
During the import process, Returns are automatically created for the required Statistical Periods
and Flows, for the indicated existing PSI(s), if they don’t exist yet.
The Import Format for this type of import therefore includes the PSI Identification, Statistical
Period and Flow for each Return Line.
The “Multi-PSI Import” function is selected by “Import / Multi-PSI Import”.
9.3 View Import-Log
The “View Import-Log” function is selected by “Import / View Import-Log”. It can also be
presented at the end of an import session.
The Import Log is of particular interest for the “Multi-PSI Import” function, as Return Lines
without or with incorrect PSI Identification, Flow or Period can’t be imported in IDEP and are
only listed in this log.
Information stored in the log includes:
Start of Import:
- Start Date and Time of the import;
- Importname;
- Filename and Tablename (if applicable).
Lines with incorrect or missing PSI, Flow or Period (up to a maximum of 100):
- PSI Id;
- Line number in Import Source-File;
68 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
-
Name of Field containing the error;
Value of the Field in Error.
Lines that are otherwise incorrect (up to a maximum of 100):
- PSI Id;
- Declaration Nr;
- Line number in Import Source-File;
- Line number in Return;
- Name of Field containing the error;
- Value of the Field in Error.
End of import:
- Date and Time;
- List of Declarations for which lines were imported.
- PSI Id;
- Declaration Nr;
- Lines Imported;
- Imported Lines in Error.
69 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
10.
SYSTEM
System functions influence the behaviour of the complete IDEP/CN8 application and thus apply
to all PSI’s defined in the system. Functions on the system level are:






Exchange Rates
Administrative Parameters
Select Printer
Display Setup (function is described in Chapter - Graphical User Interface);
Settings
Collecting Centre
10.1 Exchange Rates
The “Exchange Rates” function is selected by “System / Exchange Rates” or by clicking the
“Exchange Rates” Button.
The Exchange Rates table allows automatic or manual conversion of amounts in Foreign
Currencies into Local Currency.
To add an Exchange Rate, the User needs to specify:
 A unique Currency Code,
 An optional Description,
 The Exchange Rate of the new Currency
Exchange Rates can also be downloaded from outside IDEP. The “Download exchange rates”
function is called from the Exchange Rates screen via “System /Exchange Rates”
The Exchange Rates are used to perform currency conversions.


In the Return line data entry screen.
In the return line Model data entry screen.
70 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
10.2 Administrative Parameters
The “Administrative Parameters” function is selected by “System / Administrative Parameters”.
The administrative parameters consist of a set of values that allow the User to specify the
following.
E-mail users should specify the Telecom Output Path where they want the information to be
placed prior to sending. If this path does not exist on the system, it will be created automatically
during the telecommunication or e-mail output.
HTTP is alternative output option which transfer the Intrastat return directly via web upload.
Address for Reverse Routing
Not applicable.
Work Station ID
It is necessary to specify a different value for the Workstation ID for every installation of the
package when INTRASTAT returns for the same PSI are created. In a LAN environment the
workstation ID has to be set for each server installed. The workstation ID will then be the
identifier that will uniquely identify the returns.
If the User changes the Workstation ID, only returns that have not yet been sent to the CNA will
receive this new ID.
Enable Archiving
Is optional and gives the possibility to archive returns by setting this parameter to Yes. This
functionality is Off by default.
Automatically fill in EURO if applicable
71 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Is optional and gives the possibility to predefine EUR as the currency code when registering
return lines. This functionality is Off by default.
Last Interchange Number
The number of the Last Interchange (message by telecommunication, e-mail, diskette) sent to
the CNA will be presented here.
10.3 Select Printer
The “Select Printer” function is selected by “System / Select Printer”.
This option allows the User to select a printer that is installed in his system and to modify its
settings. If no printer is selected by the User, then the Windows Default Printer is selected.
Without changing the printer’s original settings, printing in Portrait or Landscape can be selected.
The Printer Setup button allows the User to change the settings for the printer in the same way as
via the Windows Settings / Printers option. Note that changes made here are applied throughout
the entire Windows system.
10.4 Display Setup
Refer to Section - The Graphical User Interface / Display Setup.
10.5 Settings
E-mail (10.5.1)
MAPI e-mail (10.5.1.1)
SMTP e-mail (10.5.1.2)
HTTP POST upload (10.5.3)
Proxy server (10.5.4)
10.5.4 E-mail
The “E-mail Settings” function is selected by “System / Settings”.
In this screen, the User who is allowed and wants to send his declarations to the CNA via e-mail,
has to specify a number of required configuration settings depending on the method to be used
for sending declarations via e-mail.
There are two possible methods of sending a declaration via e-mail:
72 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
1. IDEP creates the declaration as an output file in the directory defined in “Administrative
Parameters / Telecom Output Path”. The User has to send this file himself to the CNA as an
attachment to an e-mail message.
2. IDEP creates the declaration and automatically sends it via the User’s e-mail system to the
CNA.
To use the first method, the User has to disable the checkbox Automatic E-mail Enabled. The
path and name of the file to be send to the CNA will be shown when the Official Output is
created. If enabled by the CNA, the User will get a warning next time he starts IDEP if he has
forgotten to send the file (or to delete it after sending).
To use the second method, the checkbox Automatic E-mail Enabled has to be enabled.
IDEP supports two methods of e-mail transfer: MAPI, Messaging Application Programming
Interface, and SMTP, Simple Mail Transfer Protocol. MAPI uses the e-mail facilities already
installed on the PC, while SMTP will establish the e-mail communication by itself.
For the User of the Automatic e-mail facility, MAPI is the simplest to use, and therefore the
default – provided that a suitable MAPI-client, such as Microsoft Outlook, Exchange or Lotus, is
installed on the PC. If IDEP detects that MAPI can’t be used, it will switch to SMTP.
10.5.4.1 MAPI e-mail
When using the “E-mail” option to make the official output, a file will be created that will be put
If MAPI can be used, the following e-mail Settings screen is presented:
The E-mail Address of the CNA’s Collecting Centre is displayed. The correct address has
already been specified by the CNA in the Collecting Centre parameters or the e-mail
specification file.
73 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Settings to be entered are:
Normally, MAPI mail will function without any configuring in IDEP. The “Advanced” Button
allows the User to make some specific settings in case it doesn’t.
The Logging Enabled checkbox switches on the logging, in case of problems the log file can be
sent to the CNA for further investigation. It is found in the LOG subdirectory.
The MAPI Mail and SMTP Mail Radio Buttons allow the User to make his own choice between
the two (IDEP will always try to select MAPI).
The My server requires authentication checkbox needs to be checked if the User’s server
requires a User Name and Password.
74 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
10.5.4.2 SMTP e-mail
If IDEP has selected SMTP as the appropriate transfer method, or the User has manually
switched from MAPI to SMTP using the above Radio Button, the E-mail Settings screen contains
the following:
The E-mail Address of the CNA’s Collecting Centre is displayed. The correct address has
already been specified by the CNA in the Collecting Centre parameters or the e-mail
specification file.
Settings to be entered are:
Return Address, this is the e-mail address of the User.
Display Name (optional), the User’s name.
Outgoing mail Server, this is either the name of the LAN e-mail server in the User’s internal
network, or the name of the e-mail server of the Internet Service Supplier.
Port Number, the port used for the e-mail host.
The My server requires authentication checkbox needs to be checked if the User’s server
requires a User Name and Password.
The Logging Enabled checkbox switches on the logging, in case of problems the log file can be
sent to the CNA for further investigation. It is found in the LOG subdirectory.
75 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The “Defaults” Button restores the initial settings.
10.5.5 HTTP POST upload
This function is activated via menu choice ‘System / Admin. Parameters’
set Official via HTTP = Yes.
Upload of returns in an XML-file to Statistics Sweden’s website EDI-Intra, the automated
receiving system process the upload and sends a reply message to email-address defined in menu
choice ‘Parties / PSI’S. This is an option to choose for PSIs that for some reasons cannot or will
not use e-mail to send their returns.
10.5.6 Proxy server settings
The “Proxy settings” in “System / Settings” should be considered if “Automatic e-mail” or HTTP
upload doesn’t work due to security restrictions of a Proxy server.
10.6 Collecting Centre
The “Collecting Centre” function is selected by “System / Collecting Centre”.
This function allows the User to consult the list of Collecting Centres and the details of the
selected Collecting Centre. The address information can be used when the official output is sent
to the CNA by mail. The fields containing additional information that is required in the official
output are copied automatically when the Collecting Centre is selected in the PSI screen.
76 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
11.
SYSTEM MAINTENANCE
If working in a LAN environment, System Maintenance functions can only be performed when
the databases are exclusively available to one User, or in other words, when there are no other
Users logged on to the system.
The second User who logs on during maintenance by the first User, will receive a message to try
to logon again later.
11.1 Declaration Maintenance
The “Declaration Maintenance” function is selected by “System Maintenance / Declaration
Maintenance”.
This Menu option allows the User to do the maintenance of the return information.
Return maintenance can be done for the current PSI only or in the case of a Third Declarant for
all PSI's at once.
The process of archiving returns is supported through the following features, that are discussed in
the following Sections.
1. Archive: Move return data to another disk.
2. De-archive: Move archived data back into IDEP.
3. Delete headers: Remove the headers which stay as a reference in IDEP.
11.1.4 Archive To Disk
The function “Archive to Disk” is started in “System Maintenance / Declaration Maintenance /
Archive to disk”.
When the User wants to make space available on his hard disk, or the returns he has kept in his
system are not required “on-line” anymore, he can Archive the returns which have been sent.
After selecting this function, an overview appears showing the returns that are ready to be
archived.
The procedure for archiving returns is as follows.
Select the period or the declarations to be archived. Note that only returns with the status "Sent =
Yes" can be archived. Other returns will be ignored, even if their identification number is within
the selection.
By “Archive to Disk” all declarations as presented are archived, by “Archive to Disk List” a
selection can be archived. Click on the appropriate Button.
77 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Select the drive and path where the archived output should be placed. The path must be outside
the IDEP/CN8 installation itself, for example My Documents.
IDEP will suggest a new name for the archive (<PSI ID>_DDMMYYYY.MDB). The directory
for archive files will be derived (from information stored in the Windows Registry during a
previous archival operation - this will ensure that all archive files will in principle be stored in the
same directory). The user is free to choose another name.
The database name for the MS Access output database can be entered by the User, the table
names for the three tables involved are assigned by the system. The tables involved are: Detailed
Headers, Detailed Lines, Aggregated Lines. The file layout of these files (field order and
length) is the same as in the IDEP database.
Now IDEP generates the archive database, in the selected path with the specified file name.
If the archive has succeeded the necessary information will be recorded in the ‘Archive’ and
‘Archive Details’ tables. If no returns have been archived, no entry will be made in the Archives
table.
It is up to the User to take a backup of the database files.
Note that the header of a return which has been archived, remains in IDEP as a reference. Only
the return lines have been removed from the database. The return now has the status "Archived =
Yes".
Third Declarants can archive declarations for one or more PSI's.
All declarations for all PSI's with a Statistical Period within the specified range will be
processed in the same database file.
The features for the archiving process as a Third Declarant are identical to those of a single PSI.
However, no range of Returns can be entered, as this range would be different for each PSI.
For a Third Declarant, the Checkbox “All PSI’s” allows the presentation of all declarations for all
PSI’s that are “Sent” and thus Ready to be Archived.
11.1.5 De-archive
The function “De-archive” is started in “System Maintenance / Declaration Maintenance / Dearchive”.
Returns which have been archived can also be moved back into the IDEP database. This option is
useful in case the User has archived some information and he now wants to restore it in his
system.
78 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
It is possible to de-archive information from previous releases.
The procedure for de-archiving returns is described in the following steps.
When the function is started, the “Overview of Archives” is presented:
Every Archive that has been made has been recorded in the Archive table, including:
- Date and time of archival;
- Operation (Archive or De-archive);
- Third Declarant ID or current PSI ID;
- User ID;
- Archive file name.
The “Overview of Archives” list offers the following functionality (invoked in the Toolbar, the
“Actions” menu, the “Context” menu or by Function keys):
- Display the “Archive Details” for the currently selected archive entry. This will display a
separate (sortable, read-only) list. The title area of this list will include the file name if it
exists. The “Archive Details” are shown when the User Double Clicks on an Archive or
has selected an Archive and then clicks the “Consult” button or via “Actions / Modify” or
by the F6 key.
-
-
-
-
The information presented in this list includes:
- Date and time of archival - linking this detail to the archive file name.
- PSI ID
- Selected declaration details:
Return number & Workstation
Flow
Return Type
Period
Send date
Restore the archive of the currently selected archive entry. This option is only available if
the file of the selected entry actually exists. This function can be invoked by clicking the
“De-archive” button.
De-archive another file. This allows de-Archiving an archive file not shown in the list (this
is the original De-archive function up to IDEP Version 5). A file selection box is presented
initialised with the most recently used Archive directory if this information is available.
This function can be invoked by clicking the “Select a File to De-archive” button.
Analyse an archive. The user must select a file that IDEP will analyse. If this file does not
yet occur in the list and it is an archive new entries will be added to the list describing this
archive. The user name field will contain (*) indicating that this was an analysed archive.
The date will be derived from the file date. Analysis also checks if the archive is for the
current Member State. This function can be invoked by clicking the “Analyse (import) an
Archive” button.
Delete the currently selected record. The user will be asked to confirm the deletion of the
archive.
79 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
-
Sort on columns (on Date, PSI ID, and Return number) by clicking on the respective
column headers.
Restoring the archive will add a new record where the ‘Operation’ field is set to ‘De-Archived’).
If no returns have been retrieved, no entry will be made in the Archives table.
The De-archived returns now have the status "Archived = No" again.
For the Third Declarant the process of “De-archiving” is exactly the same as described in the
case of one PSI, except that he can choose to De-archive All PSI’s or the Current PSI only.
11.1.6 Header Deletion
The function “Header Deletion” is started in “System Maintenance / Declaration Maintenance /
Header Deletion”.
When the User is sure that the data he has archived will not be needed anymore he can remove
the return headers by using this option. Even after having executed this option, it will still be
possible to restore the return data by “De-archiving”.
After selecting this function, an overview appears showing the returns that are archived.
The procedure for deleting headers of archived returns is as follows.
Specify the Statistical Periods of the archived returns, for which the particular header in IDEP
should be removed.
Note that only return headers with the status "Archived = Yes" can be deleted via this function.
Other returns will be ignored even if their identification number is within the range.
By “Header Deletion” all declarations as presented are archived, by “Header Deletion List” a
selection can be archived. Click on the appropriate Button.
For the Third Declarant the process of deleting headers of archived returns is the same as
described for one PSI. All selected return headers of all PSI's which have been archived are
deleted.
11.2 Backup Idepdata
The function “Backup Idepdata” is started in “System Maintenance / Backup Idepdata”.
It allows the User to create a backup of ALL PSI dependant information for all PSI’s.
In order to do a backup the following must be specified.
80 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014


Destination drive and path. The path must be outside the IDEP/CN8 installation itself, for
example My Documents.
File name for the backup .ZIP file.
All the database files concerned are zipped into this file.
When a backup is made, IDEP will remember the backup file name in the Windows Registry.
Before backing up, IDEP will derive a suitable backup file name from any information stored in
the Windows Registry.
The name of the file will be ‘IDEPBAK_DDMMYYYY.ZIP’. The directory will be the directory
name of the file stored in the Windows Registry (this will ensure that all backups will in principle
be stored in the same directory). The user is free to choose another name.
All backup, restore and upgrade operations are logged in a file ‘maint.log’. This file is also
included in any backup archive.
This file should not be edited by the user!
Note that the version number of the IDEP package that made the backup is kept with the Backup
information to enable the correct Restore of the information.
The backup will include any log files found in the toplevel, toplevel LOG directory, the MS LOG
directory (e.g. SE\LOG) and any IdepTest log files found in the temporary directory. These log
files will not be restored if the backup file is restored. These files are included for information
only and could be used by the CNA if the User has sent his Backup in case of problems.
At the end of the backup procedure, a message is displayed to indicate whether the backup was
successful or not.
11.2.4 Automatic backup
IDEP automatically makes a backup of user data each time the program is restarted if the max file
size is 10 MB (only one backup per day). Backups are saved in a backup folder where IDEP is
installed.
The default setting for the automatic backup is on, but can be disabled in "System-> Screen
Settings" under "Workspace".
Backups created over 3 months ago are automatically deleted to the recycle bin, but only if there
are newer backups.
11.3 Restore Backup
The function “Restore Backup” is started in “System Maintenance / Restore Backup”.
81 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
This option allows the User to restore a previously made backup. The complete PSI data are
restored, all PSI dependant information present in the system is overwritten!
The Restore facility can be used in two cases:
 When the User accidentally has removed PSI dependant information.
In this case, simply Restore the most recent Backup. Information that was entered between
the moment of making the Backup and the Restore operation, is lost. It is therefore important
to make a Backup regularly.

When the IDEP/CN8 package as a whole doesn’t function anymore.
In this case, the User should install a new IDEP/CN8 package and in this package run the
“Restore Backup” function.
When the restore function is invoked IDEP will present a list of known backups that are stored in
the ‘maint.log’ file. The list will only show backup files that really exist. In the list it is possible
to use the:
 “Restore Selected Backup” Button for starting the restore of the currently selected file;
 “Choose Backup” Button for invoking the file selection dialog to choose a file yourself.
The list shows:
 Date of backup;
 File name of the backup;
 Version of IDEP used to backup;
 List of PSI databases available in the backup.
In the file selection dialog for “Choose Backup”, the most recently used backup file name is
filled in already. The user can choose another file. If no information about the most recently used
file is available in the Windows Registry, IDEP will remember the file being restored as
restore/backup file for future uses.
Only a single file name will be remembered (but distinct for eventual different Member State
installations on a PC).
Since IDEP Version 6, it is possible to restore backups of previous IDEP versions (as old as
Version 3). This is done by the Upgrade mechanism of IDEP. After the Backup information has
been retrieved, IDEP is automatically stopped with an informative message. When the User starts
IDEP again, the restore, which in fact is an Upgrade of the old backup information, is performed.
Note:
For safety reasons, all files that will be overwritten are included in a number of ‘.bak’ files. If the
restoration upgrade has successfully completed, the ‘.bak’ files will still remain in the current
installation. They could safely be deleted by the user.
All backup, restore and upgrade operations are logged in a file ‘maint.log’. This file is also
included in any backup archive. If a backup is restored the ‘maint.log’ file included in the archive
82 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
will be restored too and information about the restore operation will be added to this file. Any
existing ‘maint.log’ files will be renamed to ‘maint.log.N’ (where N is 1 to 9).
Upgrade actions will also be logged in the maint.log file. This information could be useful when
troubleshooting.
This file should not be edited by the user!
At the end of the restore procedure, a message is displayed to indicate whether the restore was
successful or not.
11.4 Clean-Up
The function “Clean-Up” is started in “System Maintenance / Clean-up”.
This function invokes the so-called “Compact” and “Repair” database functions. It makes lost
space in the database, which is caused by changes the User makes (Add, Delete, Modify
information), available again. Furthermore it is capable to repair in most cases corrupted
databases. Besides freeing-up disk space, a regular “Clean-Up” improves the performance of the
system.
11.5 Download
The function “Download” is started in “System Maintenance / Download”.
IDEP provides the possibility to convert Standalone Installations into a Client/Server
configuration. This means that the individual databases of the Standalone Installations are
combined into one database on a Server system which in fact may be one of the original
Standalone systems or a new, “clean” installation.
“Download” is only possible if both installations, i.e. the Server and the Standalone installation,
have the same Version of IDEP installed, of the same Member State.
To perform this operation, the function must be started on the intended Server system. In
addition to the general rule that no second User may be logged in when performing a System
Maintenance function (as described in the introduction of this Section), to execute this function it
is also required that no User is logged in on the Standalone system.
The User must indicate the path where the Member State directory of the IDEP for Windows
Standalone installation is found.
After clicking OK, the following data is downloaded from the Standalone installation to the
Server:
83 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014



All data of PSIs that didn’t yet exist on the Server.
Exchange rates that didn’t yet exist on the Server.
If the Standalone installation contains another language than the Server installation, the new
language is added to the Server.
If Download has completed, a message is presented.
Merging the data of a PSI.
For a PSI that occurs in both the source and target installations (i.e. the currently running IDEP)
IDEP will attempt to merge the PSI data.
Declarations from the source PSI will be appended to the list of declarations of the destination
PSI. The Last Return Number will be used to assign a new declaration number to the added
declarations. The new assigned numbers will be reported.
Duplicate declarations that are Archived or Sent will be ignored and reported.
The PSI's Information Data (Models, PSI Goods Codes etc.) will be copied and duplicates will be
silently ignored.
PSIs that to do not exist in the destination installations will be upgraded into the destination.
From IDEP Version 6 on, it is thus possible to merge any previous installation. There is no
restriction on the version number of IDEP to be downloaded into the current IDEP version.
After the merge of PSI data IDEP will check the validity of line models.
A log file will contain detailed information about the merge operation.
Once the operation has completed the user gets the choice to visualise the log file. The
confirmation message will display a summary of PSIs processed (an asterisk is added to new
PSIs).
The log file can be inspected. It can be shown at any time via the menu option “System
Maintenance / Download Log”.
Important note:
Given that declarations are appended, running the merge operation again will append the source
declarations again!
After the successful Download operation, the Standalone installation can be removed and a Client
Installation can be performed on the former Standalone PC.
The procedure can be repeated to combine the data of several Standalone installations into one
server.
11.6 Download Log
The function “Download Log” is started in “System Maintenance / Download Log”.
This function presents the log file resulting from a Download / Merge operation.
84 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Through this log, the User is informed about any re-numbering actions performed during the
Download operation.
11.7 Check for Upgrades
The function “Check for Upgrades” is started in “System Maintenance / Check for Upgrades”.
This option is only available if IDEP/CN8 can be downloaded / upgraded from the Web-site of
the National Administration. It will check on the CNA Web-site if any components of the
IDEP/CN8 package have been replaced by later versions. If so, a (partial) re-installation of the
package will be done. The package will be re-started afterwards.
If no upgrade is available, the following message appears:
11.8 Install extra languages
The function is started in “System Maintenance / Install extra languages”.
If there is only one single language, this option is not available. The install of the language is
considered to be a maintenance operation. Therefore there must only one single User using IDEP
and no other maintenance operation must be active. If this is the case a message will be displayed
in stead of a language selection dialog. A language selection dialog will be shown with the
languages that can be installed/removed.
11.9 Check for upgrades during start
If an Internet connection is available, IDEP can check to see a new version is available. If an
upgrade is available, the user will be prompted to confirm the upgrade. Confirming this prompt
will carry out the actual upgrade.
This option can be switched on or off by clicking on menu choice ‘Syst. Maintenance / Check for
upgrades during start’ By default this option is switched on.
85 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.
CN8
Combined Nomenclature. The 8 digit goods codes that are used within all the Member States
of the EU. The CN8 part of the package provides user friendly facilities to find the correct CN8
Code for the goods the User is Importing / Exporting. It is possible for a PSI to specify a table
within the package that defines a relationship between the goods codes he is familiar with inhouse and the official CN8 Goods Codes.
Note that there are four possibilities to access the “CN8” tables.
1. Via the option “CN8” or by clicking the “CN8” Button
.
2. When making a declaration by pressing F2 on the CN8 Code field of the Return line data
entry screen, or of the Line Model data entry screen.
3. When specifying the CN8 Goods Code for which a “Report by Goods Code” should be done.
4. When specifying a PSI Goods Code by pressing F2 on the CN8 Code field of the PSI Goods
Code data entry screen.
In the first case the User can consult the tables of CN8 (see CN8 User manual).
In the other cases the User can consult and select a CN8 Goods Code and return it to the
corresponding field in IDEP.
12.1 General information about the Combined Nomenclature (CN8)
For correct use of the application, a basic knowledge of the combined nomenclature is
required.
The basis of the nomenclature is formed by the Official texts. These consist of the “juridical”
notation of the subdivisions of goods codes. The hierarchical levels in the classification can be
deducted from the code itself and the number of dashes (for example, - - or - - - ) in the
description.
Because of the hierarchical structure of the Official texts, it is often difficult to understand the
exact meaning of the description of a single CN8 code. Other possibilities are therefore
provided to look at the list of codes as follows
1. the Self-explanatory texts, showing the complete descriptions of each 8 digit code and;
2. the Minimal hierarchical sequence, showing the complete hierarchical sequence of a code
in the Official texts.
To make it easier to identify the correct code for a given product, two search methods have
been included:
1. search by Keyword(s), resulting in a list of all codes that include the specified keyword(s)
and;
2. hierarchical search, allowing to follow the hierarchy step-by-step.
86 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The nomenclature consists of 21 sections, approximately a hundred chapters (first two digits of
the code) and approximately 10,000 8-digit goods codes. In the texts there is a general
introduction including an introduction per section and per chapter included.
If relevant to a particular code, the supplementary unit qualifier will be shown on the screen.
This is a qualifier for the quantity (other than the default qualifier “kilogram”) that has to be
entered in the statistical declaration.
If applicable, footnotes are also attached to the official texts.
12.2 The Graphical User Interface (GUI)
Once the application is started, the graphical user interface (GUI) shows the following
information.





Screen title, User Interface Language and Year of the Nomenclature.
Menu bar presenting the main options. Sub-options are shown by clicking on a main
option.
Tool bar, giving fast access to the major functions via Buttons.
The CN8 information area.
Status bar.
So-called ToolTips provide brief information when the mouse pointer is positioned on a
Button.
Holding down the right mouse button anywhere on the screen presents a copy of the Consult
menu, which is context dependent. The only options available are those that are valid in the
current conditions.
87 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.3 A brief look at the main concepts
There are two distinct presentations of the combined nomenclature CN8 as follows.
1. The presentation of the official texts of the official journal of the European Union.
2. The presentation of the self-explanatory texts provided by EUROSTAT.
12.4 Self-explanatory Texts
Each self-explanatory text is identified by a product code. Sometimes a supplementary unit
may be attached to the self-explanatory text.
For example, for the code 0101 21 00, the self explanatory text is: “Pure-bred breeding
animals”.
88 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.5 Official Texts
The official texts are grouped as follows:
 in sections numbered sequentially (from I to XXI);
 within a section, in sequentially numbered chapters (from 1 to 98);
 within a chapter, there may be sequentially numbered sub-sections (I, II, III etc.).
There is a hierarchical relationship between official texts which describe a product in an
increasingly precise manner. The level within the hierarchy is indicated by the "product code"
for the first two levels and by the number of dashes preceding the texts for the next levels.
For example, the CN8 code 0101 21 00 is for “Live horses – Pure bred breeding animals” as in
the following screen:
12.6 Relationship between official and self-explanatory texts
There is a two-sided relationship between official texts and self-explanatory texts for the eightdigit product codes. For other product codes there is not always an exact match between the
two texts.
The CN8 application offers the facility to toggle between both sets of texts. If there is not an
exact match, it will go to the nearest eight-digit product code.
89 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.7 Minimal Sequence
The minimal sequence is the minimal hierarchical sequence of official texts required to
understand the context and the content of a given official text. This function is only available
when the official texts are selected. For example, for the code 0101 21 00, see screen below.
12.8 Keywords
For given keywords the CN8 application offers the facility to access matching self-explanatory
texts, or official texts as described in Section 12.9.6 Keyword Search
12.9 Add/Remove chapters
Users that don't want certain chapters to be install can select/de-select those by pressing
the "Invert Selection" button and specify all or only a few chapters.
12.10 Details of CN8 functions
By default, at the start of the application the screen presenting the official texts is displayed.
All CN8 functions can be called through the Graphical User Interface, as described in Section
1.2.
90 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.10.4
Consult \ Select Year Nomenclature
A CN8 goods code may be valid for one year but not valid for the following year , or the
corresponding text may have been modified. All the information displayed by the CN8 package
at a given moment is related to a single year. Therefore the year which the nomenclature relates
to is displayed in the header and the Status bar of the CN8 screen.
However, the CN8 package contains information relating to more than one year.
For example in the year 2014, the user has the possibility to view the CN8 codes for 2014, but
also for 2013 (many of them are the same) by either:
 clicking the button
on the Tool bar;
 using the F11 function key;
 selecting the menu option Consult \ Select Year Nomenclature;
 selecting the menu option with the right mouse button.
The selection of another year “toggles” between the years which are available.
12.10.5
Consultation of official texts
The screen of official texts is displayed by default at the start of the application.
It is also accessible by either:
 selecting the menu option “Consult \ Self-explanatory texts <-> Official texts”;
 selecting the menu option with the right mouse button;
 the F7 Function Key;
 the button
on the Tool bar.
The following are the fields for this screen:
 the product code;
 the supplementary unit qualifier;
 a flag to indicate if there is a footnote attached to the text;
 a flag to show whether the text is new (‘+’) or modified (‘~’).
91 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Example:
Note, that where texts may be truncated in the main window, the full text for the selected code
is always displayed in the lower window.
12.10.6
Consultation of self-explanatory texts
This function is accessible by either:
 selecting the menu option “Consult \ Self-explanatory texts <-> Official texts” or;
 selecting the menu option with the right mouse button or;
 the F7 Function Key or;
 the button
on the Tool bar.
The following are the fields for this screen:
 the product code;
 the self-explanatory description;
 the supplementary unit qualifier.
Example:
92 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Note, that where texts may be truncated in the main window, the full text for the selected code
is always displayed in the lower window.
12.10.7
Consultation of the minimal sequence
This function is only available when the official texts are selected. The User must move the
cursor to the official text for which the minimal sequence is required and then either:
 select the menu option “Consult \ Minimal Sequence” or;
 select the menu option with the right mouse button or;
 enter the F5 Function Key or;

click the button
on the Tool bar.
12.10.8
Hierarchical Search
This function is accessible by either:
 selecting the menu option “Consult \ Hierarchical Search” or;
 selecting the menu option with the right mouse button or;
 the F4 Function Key or;
 the button on the Tool bar.
It can be used on Official texts only. The screen presenting the table of contents for sections is
then displayed, with an adapted toolbar as follows.
93 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The following functions are available to the User:





Select a chapter with the mouse or up \ down arrows.
Enter the next hierarchical level using the
arrow button.
Select the desired code in the list presented for this level with the mouse or up \ down
arrows.
Enter the previous hierarchical level using the
arrow button.
Leave this search function by re-selecting the menu option “Consult \ Hierarchical Search”
or the F4 Function Key.
Example showing the “explosion” of “Live bovine animals” in Chapter 1 using the
arrow
button.
First select Chapter 1 in the list and click , an overview of the hierarchical level 1 appears:
94 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.10.9
Keyword Search
This function is accessible by either:
 selecting the menu option “Consult \ Keywords” or;
 selecting the menu option with the right mouse button or;
 the F3 Function Key or;

the button
on the Tool bar.
The screen allows the User to define a selection of keywords. The selection immediately
returns the list of self-explanatory texts in the lower window, which correspond to the criteria
defined (all selected keywords).
The selection of a self-explanatory text within this list, followed by clicking the “GO TO”
button, returns the User to the screen of official texts, or self-explanatory texts respectively, at
the new position.
95 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
Example:
When you are in the list of keywords you can use the following options:




“>” button: to select a keyword, the selected keyword is displayed in the selection of
keywords;
“<” button: to de-select a keyword;
the entry of the first letters of a keyword moves the User automatically to the nearest
keyword.
the “GO TO” button to go back to the Official texts or Self-explanatory texts at the selected
position, depending on the presentation mode before entering the keyword function.
12.10.10
Consultation of footnotes
Footnotes attached to official texts are accessible through the screen of official texts by either:
 selecting the menu option “Consult \ Texts” or;
 selecting the menu option with the right mouse button or;
 the F6 Function Key or;
 the button
on the Tool bar.
Footnotes can be printed by use of the “Print” button.
96 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
12.10.11
Consultation of introduction texts for sections and chapters
This function is accessible from the screen of official texts and from the hierarchical search
screen. The User must choose an official text corresponding to a section, or a chapter and then
access the introductory text by either:
 selecting the menu option “Consult \ Texts” or;
 selecting the menu option with the right mouse button or;
 the F6 Function Key or;

the button
on the Tool bar.
Chapter and Section texts can be printed by use of the “Print” button.
12.10.12
Export a range of texts to disk
A range of texts can be made by clicking on the first code to be selected and then click on the
last code to be selected while holding down the Shift key. This can be done in either the
Official texts or the Self-explanatory texts. Example:
97 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
The Export function is available by accessing the "Export" option on the menu or by clicking
the button on the Toolbar.
This dialog allows the User to choose between exporting a selected range as described before,
or to export selected CN8 codes according to certain criteria.
The available wild cards are : * and ? The code format is 9999 99 99 – include spaces! Each
digit of the code can be replaced by a wild-card (only one type of wild-card can be used for one
code).
Examples :
01* will select all the CN codes which begin with 01.
01?? will select all the CN codes which begin with 01 and of which the length of the code is 4
digits.
After having made the selection, clicking “OK” will present a dialog to select the path and
filename.
The information to be specified by the user is as follows:
 the File type;
 Access;
 Text;
 Excel;
 XML;
 Hypertext.
 the drive and path (Look in);
 the File name.
After clicking on the Open button, the following data will be exported:
 the product code;
98 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014



the official or self-explanatory description;
the supplementary unit qualifier;
the new/changed indicator.
Using the appropriate programs to open the files produced by this function, the results can be
re-formatted, sorted, printed, etc.
99 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
13.
Window
The “Window” Menu option allows manipulation of the open windows. It offers the following
possibilities.



“Cascade” open windows, or;
“Tile Vertical” of open windows, or;
“Close All” open windows.
A list of all open windows allows the activation of a selected window.
100 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
14.
Help
The “Help” Menu provides the general Help items.
“Table of Contents” of all available Help.
Information “On this Form”.
“Support” information.
“Diagnostics”
“Ouick User Guide”
The “About” option provides information relating to IDEP/CN8 itself.
Help on specific Topics is provided through the “Table of Contents” or the Help button
presented on the various IDEP/CN8 screens.
The Help form is a so-called modal form, which allows switching the focus back to the Main
application. The Help window may be maximised and minimised. For subsequent invocations
its last location/size will be restored (e.g. if the User has moved/sized it).
If the Main window is minimised the Help window will be minimised along with it. If the Help
window is minimised, invoking help again will restore the Help window to its most recent
size/location.
All Help texts can be printed individually through the Print Button on each Help screen.
For Diagnostics see chapter 16.
101 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
15.
IDEP/CN8 in a multi-user LAN Environment
15.1 Introduction
In a LAN environment where several Users can access the same functionality and the same
data at the same time, it can be necessary to restrict the use of some of the functions and
simultaneous access to data.
From a functional perspective, three cases can be considered. The first is the most restrictive.
1. Functions accessible when only one User logged on.
2. Functions accessible by one User at a time.
3. Accessing information with multiple Users.
The different cases will now be explained in more detail.
15.2 Functions accessible when only one User logged on
Most system maintenance functions can be only be executed when only one User is logged on
to the system.
Two possible conflict situations can occur.
1. A User tries to log on to the system while another user is executing a function which
requires only one User to be logged on.
The User who tries to log on will see the following message.
“A system maintenance function is being executed. You cannot log on right now. Try
again later.”
The User leaves the system.
2. A User tries to execute a function which requires only one User to be logged on while
already another User is logged on.
The User who tries to execute the function will see the following message.
“This function can only be executed when no other Users are logged on to the system.”
The User leaves the function.
Functions which can only be executed when only one User is logged on to the system are the
following.




“System Maintenance / Backup Idepdata”.
“System Maintenance / Restore Backup”.
“System Maintenance / Clean-up”.
“System Maintenance / Download”.
102 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
15.3 Functions accessible by one User at a time
Some functions can only be executed by one User at a time. Multiple Users can be logged on to
the system.
When a User is accessing a "one-User-at-a-time" function and another User tries to access the
same function, then this second User will see the following message.
“Function already in use. Only one User can have access at a time.”
The second User cannot access the function.
Functions which can only be executed by one User at a time, while multiple Users are logged
on to the system, are as follows.




“INTRASTAT Output Returns”.
“System Maintenance / Maintenance PSI / Archive to Disk”.
“System Maintenance / Maintenance PSI / De-archive”.
“System Maintenance / Maintenance PSI / Header Deletion”.
15.4 Accessing information with multiple Users
The previous two paragraphs dealt with functions which cannot be executed by multiple users
due to the nature of the functionality. In many cases, multiple Users are using the same
information in functions which can be accessed by multiple Users at the same time.
For example, two Users can be entering Return data for the same PSI at the same time, but only
for different Returns. Should one of these Users try to modify the same Return on which the
other User is working, he will get the following message.
“Function already in use. Only one User can have access at a time.”
The second User cannot modify the data, it is locked by the first User.
If for some reason, for example a power failure, the IDEP package isn’t closed properly, some
data may still be locked when the package is re-started. A special function takes care of the
unlocking of all data in the databases.
An automatic refresh mechanism makes sure that multiple Users consult the same data, even if
they look at the same window for a longer period. A refresh is done every 15 seconds.
103 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
16.
Diagnostics
16.1 Introduction.
In some cases, the installation or execution of IDEP/CN8 fails. Often, this is caused by
specific conditions on the User’s platform. Given the almost infinite possible system
configurations, it is difficult for a CNA who wants to provide help to this User, to find out
the reason for the failure.
For this reason, a tool IdepTest (AKA Diagnostics or Diagnostix ;-) has been implemented.
This tool does not require any kind of installation and runs on all Windows platforms
(Windows 2000 or higher).
16.2 Running IdepTest.
The tool is found in the Help Menu.
NOTE: The user interface language of the tool is English.
16.3 Options.
IdepTest collects a lot of more or less relevant information. This is carried out very quickly.
Once this collection has completed the tool displays the collected information in a scrollable
window and one or more buttons are available:
Button
Show Log
Explore Log
Repair
DLLs
Uninstall
Restart
Cancel
Purpose
Starts the system's default editor on the produced log file.
Starts the Explorer in the exact location where the log file resides. If
possible the log file name is pre-selected. This should help the user
in locating the log file of interest for sending it to the CNA for
instance.
Repairs the registration of DLLs if this is necessary and possible
(this button is not available if this is not possible). This option is
equivalent to executing REGSVR32 on the suitable DLLs.
Uninstalls IDEP if this is possible (this button is not available if
there is nothing to uninstall). The un-installation does not remove
the data and may leave shortcuts in place.
Restarts the application (e.g. after uninstall or repair).
Exits the application or interrupts the collection process.
16.4 Log file.
Each time IdepTest is run a log file is produced in %TEMP%\IdepTest_DDMMYYYY.txt
(note the txt extension instead of the log extension; this should ensure that the system's
default text editor can be used for viewing the file). The log file can be viewed with any text
editor (Notepad or Word).
The log file is appended to. If the tool is restarted the collected data is appended to the file.
104 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
A summary of the collected data is displayed in the GUI.
16.5 Collected Information.
Detailed information about the operating system and installed software is collected.
Interesting information collected is summarised in the GUI.
From the information collected it is possible to infer if an internet connection is available, if
IDEP is correctly installed, if IDEP could use email to send declarations etc.
Summary description of the collected information:
Type of information
Miscellaneous
Detailed OS and System
Information
User information
Desktop and local settings
Data Collected
Date, version of IdepTest
Version number, service pack, CPU, memory
User name, company name, administrator status
Fonts, colours, screen resolution, system language,
regional settings
Disk drives and network Drive- and file-system type, available and used
shares
space, maximum filename length
Networking
Domain name, hostname, IP-address, dial-up
networking, internet connections
Windows Installer
MSI location and version, Policy settings (W2K or
higher), service status
Running services
NT or higher
Interesting directories
TEMP, Windows, ...
Common
Environment TEMP, PATH, ...
variables
Startup programs
From start up directory, in Windows registry
IDEP/CN8 Information
Availability of user settings, uninstallation
information, validity and suitability of installation
path, summary directory listing of installation path
Mail Clients
Installed clients, default client, email settings, MAPI
Internet software
Default browser, version, internet settings for
browser, firewall
VB & VBA Settings
To see if any other Visual Basic like applications
have been run
Office components
Office versions and what office components are
installed
Software
development Microsoft development software installed
environments
DLLs
required
by Availability, version, check registration
IDEP/CN8
Log files
Listing of any IDEP, GetRelease, MSI, IdepTest log
files
16.6 Repair
The tool for registering DLLs is available on most Windows versions: REGSVR32.
105 (107)
IDEP/CN8 User Manual
IDEP/CN8 User Manual 2014
For every DLL that IDEP/CN8 requires IdepTest checks if the required DLL is available and
has the required version. If the DLL is not correctly registered it is possible to correct
(repair) this by using the built-in repair feature of IdepTest. This will execute an operation
similar to REGSVR32.
If the tool did not encounter any repairable problems with the DLLs the repair feature is not
available.
16.7 Uninstall
A complete de-installation of IDEP, including any system files that may have been installed
is normally done by the Windows Installer via the Control Panel/Add and Remove
Programs. If this fails for some reason it is considered extremely dangerous to try
uninstalling with another tool as this could render the system useless if shared system files
are removed (it is very difficult, if not impossible, to detect if a system file is shared on a
system where the Windows Installer based de-installation failed in the first place).
If IdepTest detected IDEP uninstallation information the uninstall feature will be enabled. If
this feature is invoked only the uninstallation information and DLLs installed by IDEP’s
Install program will be removed. Any user data and shortcuts that may be available will not
be deleted.
106 (107)