PRODUCER STATEMENT -PS1-DESIGN ISSUED BY: MARKPLAN CONSULTING LTD

PRODUCER STATEMENT
-PS1-DESIGN
ISSUED BY: MARKPLAN CONSULTING LTD
TO: Louvretec New Zealand Ltd (Manual Owner / Product Supplier)
IN RESPECT OF: Louvretec Product Manual 2014 – Sections 8, 9 and 12 – Louvre Selection Tables 1 and 2; Roof
Beam Selection Table 3; Support Post Selection Tables 4 to 15; Footing Selection Tables 16 and 17.
Markplan Consulting Ltd (Design Firm) has been engaged by LouvreTec New Zealand Ltd (Manual Owner
/ Product Supplier) to provide structural design (Extent of the Engagement) services in respect of the
requirements of Clause B1/VM1, B2 (insofar as being limited to durability of the relevant structural materials as
covered in the NZ Standards Listed on this PS1), of the New Zealand Building Code and approved documents.
The design has been prepared in accordance with AS/NZS 1170.0, 1, 2/2002; NZS 3604:1999; AS/NZS 1664:1997
(verification method(s/acceptable solution(s)) (respectively) and the work is described In the Louvretec
New Zealand Ltd – Louvretec Product Manual 2014 – Sections 8, 9, 12 and calculations and details by Markplan
Consulting Ltd, ref L30-0003 dated August 2007.
As an independent design professional, I BELIEVE ON REASONABLE GROUNDS that structures designed and
constructed in strict accordance with the Design Procedures Manual comply with the relevant provisions of the
Building Code.
Date: 12th January 2014
MARK A SMITH (PRINCIPAL) on behalf of Markplan Consulting Ltd.
(Signature suitably qualified Design Professional)
BSC (ENG), MIPENZ (STRUCTURAL, CIVIL), CPENG INTPE CPENG REG NO: 173396
(Professional qualifications)
P O Box 302-846, North Harbour, North Shore 1330 (Address)
(09) 415-9793 (Phone)
(09) 415-9796 (Facsimile)
This form to accompany Form 2 of the Building Regulations 2004 for the application of a Building Consent.
PRODUCT CATALOGUE 2014© LOUVRETEC® GROUP
// technical specification subject to change without notice
Louvretec GROUP accepts no liability if structures are not designed and constructed in strict accordance with this technical manual.
12.03