JAX CHAIN DRIVE PIN & BUSHING LUBE SUPERB ANTIWEAR PERFORMANCE, NON-DRIP

Transcription

JAX CHAIN DRIVE PIN & BUSHING LUBE SUPERB ANTIWEAR PERFORMANCE, NON-DRIP
JAX CHAIN DRIVE PIN & BUSHING LUBE
E.P. CHAIN & CONVEYOR LUBRICANT
SUPERB ANTIWEAR PERFORMANCE,
NON-DRIP
PRODUCT DESCRIPTION
JAX Chain Drive Pin & Bushing Lube is a premium product
compounded for severe industrial applications, including
high loads and conditions that can cause premature wear
and failure to heavily loaded industrial chains. JAX Chain
Drive Pin & Bushing Lube provides excellent Extreme
Pressure (EP) performance and shock-loading protection for
a variety of heavily loaded chain and conveyor operations.
In addition, the unique base stock selection ensures
lubricant migration to critical friction points, providing
superior lubricating performance in pins, bushings and roller
applications.
JAX Chain Drive Pin & Bushing Lube utilizes a robust
corrosion inhibitor package to eliminate corrosion and rust
associated with the challenging environments typically
encountered in various chain and conveyor operations.
• Non-Tacky Performance—Conventional chain oils utilize
tackifying agents that have a tendency to pick up dust, dirt
or process materials which can form abrasive compounds
that block critical lubricant pathways, accelerate wear
and reduce chain life. JAX Chain Drive Pin & Bushing
Lube penetrates, leaving outer surfaces comparatively
dry and resulting in a film of lubricant with no signs of
scuffing, scoring or flaking on the load-carrying surfaces.
APPLICATIONS
Jax Chain Drive Pin & Bushing Lube is recommended for
use on heavily loaded, slow moving chains and conveyors
with a significant sliding frictional component. Additionally,
JAX Chain Drive Pin & Bushing Lube is recommended for
engineered chains where lubrication of the pin and bushing
assemblies is critical to performance and extending chain life.
JAX Chain Drive Pin & Bushing Lube meets NSF
H2 requirements for use in food and beverage plant
environments.
COMPATIBILITY
PRODUCT BENEFITS
• Superior Load-Carrying Performance—JAX Chain Drive
For optimum performance, it is recommended
that the system be thoroughly drained and, if
warranted, cleaned prior to installation.
• Penetration to Critical Friction Points—Engineered
* JAX Chain Drive Pin & Bushing Lube, as well as other synthetic
or mineral-based oils, is not compatible with polyglycol-based
oils. Thorough flushing prior to changeover is required.
Pin & Bushing Lube maintains a protective film on the
load-bearing surfaces and articulation points at all times.
chain is typically composed of combinations of pins,
bushings and various follower/roller assemblies.
JAX Chain Drive Pin & Bushing Lube flows freely
through the small clearances in chain components
to ensure penetration to the critical friction points.
JAX Chain Drive Pin & Bushing Lube is compatible
with mineral oils and most synthetic oils*.
• Water Resistance and Corrosion Protection—JAX
Chain Drive Pin & Bushing Lube’s proprietary blend
of rust and corrosion inhibitors provides excellent
water displacement and rust inhibition to conveyor
chain components subjected to high levels of water or
condensate. Superior penetrating qualities ensure rust
and corrosion protection in the hard-to-reach friction
points, dramatically extending the life of chains.
chain & conveyor
JAX CHAIN DRIVE PIN & BUSHING LUBE
PERFORMANCE FEATURES AND BENEFITS
• Superior Fluid Migration and Friction Point Penetration
• Excellent Adhesion and Water Resistance
• Rust and Corrosion Inhibited
• Extreme-Pressure Additives Prevent Stick/Slip, Scoring,
ISO 9001:2008
Certified Quality
Management System
• Recommended for Heavily-Loaded Chains
• Excellent Protection in the Presence of Water
• Superior Lubrication of Engineered Chains as well as
Heavily-Loaded Plain and Rolling-Element Bearings
and Reduce Friction
TYPICAL
PROPERTIES
CHAIN DRIVE PIN & BUSHING LUBE
(00202)
METHOD
Viscosity @ 40°C, cSt
36.3
ASTM D 445
Viscosity @ 100°C, cSt
5.9
ASTM D 445
Viscosity Index
101
ASTM D 2270
Pour Point °F (°C)
-22 (-30)
ASTM D 97
Flash Point °F (°C)
399 (204)
ASTM D 92
Fire Point °F (°C)
457 (236)
ASTM D 92
Specific Gravity
0.8660
ASTM D 298
Color
Straw
Texture
Slight Tac
Timken OK Load, lbs.
60
NSF Registration No./Cat. Code
017533 / H2
ASTM D 2509
041712
JAX products undergo continual improvement in formulation and manufacture. The values indicated in this PDS are typical production values at the
time of this writing. JAX reserves the right to alter and update product data and typical values at any time without notice. It is the responsibility of the
installer and/or purchaser to determine if these specifications are adequate and proper for the intended application. MSDS information may be found
at www.jax.com or by contacting JAX INC.
CONTAINER SIZE
CHAIN DRIVE PIN
& BUSHING LUBE
2000 Pound Tote - 276
00202-276
800 Pound Tote - 800
00202-800
400 Pound Drum - 400
00202-400
120 Pound Keg - 120
00202-120
35 Pound Pail - 035
00202-035
4 - 1 Gallon Case - 004
00202-004
JAX INC.
Menomonee Falls, WI • Sacramento, CA • Nashville, TN
800.782.8850 • 262.781.8850 • www.jax.com
Gear lubes
CHAIN & CONVEYOR