CULTIBOX SG-COMBI Assembly instructions. 3 4

3
CULTIBOX SG-COMBI
Assembly instructions.
4
Product content:
a
b
Input
to b.
Elbows x8
c
Input
to c.
Details of elbow joints
Input
to a.
Input
to a.
Input to c.
1x3
Cupboard sides
Cupboard cover
(door with zipper)
Input to b.
Input
to a.
3. Then assemble the bars b on c, such as is explained in
the scheme. B input , c input.
4. Assemble the structure that will support the cupboard
roof, making a rectangular shape (Pay attention to the
orientation of the elbows and make sure that the bars
have come to the bottom of them).
x1
Input
to a.
Carrying bag
x1
WARNING: MAKE SURE THAT THE BAR HAVE ENTERED TO THE
BOTTOM OF THE ELBOW AND NEVER FORCE THE CANVAS.
FOR 80 CM. AND 1 M. MODELS: BE SURE NOT TO MIX THE a AND b BARS UP,
IT COULD DAMAGE THE STRUCTURE OR THE MATERIAL.
1
1. Open all zippers on canvas. Assemble the bars with elbows within the cover forming a square base as shown in
the photo.
5
6
2
2. Considering the correct orientation of the elbows put c
bars in the position shown in the photo.
5. Pass the cover over, covering the roof of the cupboard.
Pay special attention to the corners to avoid the material
is wound around them. To simplify the operation START
PUTTING THE LOGO CORNER ON AND REMEMBER NOT TO
FORCE THE CANVAS.
6. Close zippers to tighten the cover and stick the sides with
Velcro, making sure that the rectangular vents are placed
at the bottom of the cupboard.