Electrotechnology Electrician OTEN (by distance) Certificate III Course description

OTEN (by distance)
Certificate III
Electrotechnology Electrician
TAFE NSW Course Number: 20222
National Course Code: UEE30811
Training Package: UEE11 Electrotechnology Training Package
Course description
Our Certificate III in Electrotechnology Electrician course is for you if you want to work as an
electrician.
You will learn how to select, install, set up, test, fault find, repair and maintain electrical
systems and equipment in building and premises.
This course meets the national Electrical Regulatory Authorities Council (ERAC) requirements
for an unrestricted 'Electrician's License'.
The Certificate III in Electrotechnology - Electrician qualification meets PART of the
requirements for issue of a 'Qualified Supervisors Certificate - Electrician' issued by NSW Fair
Trading, which permits the holder to work unsupervised on low voltage fixed wiring and
equipment and to directly supervise others undertaking this work.
We highly recommend you complete a personalised career and study profile to
confirm this course is right for you, you will find the Career Voyage link below.
Other information
This course can be offered as an Apprenticeship.
To ensure you leave us with the most up to date qualification...
If during or after your enrolment, the course in which you are enrolled is updated in line with
national industry standards, the Institute reserves the right to transition you into an alternate
course. If this becomes necessary, the Institute will advise you of the change and the
arrangements which will be available for you to complete your alternate course.
What are the entry requirements? (including Recognition of Prior Learning)
There are no formal educational requirements for entry to this course.
However, the Electrotechnology Training Package recommends typical language, literacy and
numeracy skill levels needed to successfully complete each Competency Standard Unit
undertaken within this qualification.
Learners should either be in relevant employment or have access to appropriate simulated
workplace environments to achieve the completion requirements of this course.
1300 362 346 or (02) 9715 8333
oten.tafensw.edu.au
Credit (or recognition) for modules/units may be granted based on previous learning, studies,
work and/or life experiences. For more information on Credit for this course please refer to 'If
you have the skills, get credit for a unit or this course' on the OTEN website.
http://oten.tafensw.edu.au/crhzr
Please note: Some industries have their own legislative or licensing requirements. TAFE NSW
recognition does not apply to these.
Will I need to undertake Work Placement?
Learners must be in relevant full time employment to be able to achieve the completion
requirements of this course.
Under 17 and wanting to leave school?
If you are under 17 and want to leave school, your options have been affected by a recent
change in NSW law. From January 2010 you must complete Year 10 and then continue in
either full-time education, training, paid employment or a combination of these options until
you’re at least 17 years of age. More information about options for school students under 17 is
available from the NSW Department of Education and Communities - The new school leaving
age.
http://oten.tafensw.edu.au/enrolling/how-to-enrol/351/
What kind of work could I do?
General electrician, electrical tradesperson.
What further study is available once I finish this course?
Completion of this qualification, with appropriate elective units can provide credit towards a
Certificate IV in Electrotechnology - Systems Electrician.
Pathway to university or higher education
Thinking of studying next year? Not sure if you should go to TAFE or uni? Let us help you
decide. At TAFE NSW - Western Sydney Institute we offer you the flexibility to fast-forward
your career with Pathways.
Choosing to study at TAFE before going on to uni can see you graduating and entering a
competitive workforce sooner — and not with one, but two, nationally recognised qualifications!
For more information visit oten.tafensw.edu.au/uni
What are the units I am required to complete?
1300 362 346 or (02) 9715 8333
oten.tafensw.edu.au
UEENEEC020B – Participate in electrical work and competency development activities
UEENEEE101A – Apply Occupational Health and Safety regulations, codes and
practices in the workplace
UEENEEE102A – Fabricate, assemble and dismantle utilities industry components
UEENEEE104A – Solve problems in d.c. circuits
UEENEEE105A – Fix and secure electrotechnology equipment
UEENEEE107A – Use drawings, diagrams, schedules, standards, codes and
specifications
UEENEEE137A – Document and apply measures to control OHS risks associated with
electrotechnology work
UEENEEG006A – Solve problems in single and three phase low voltage machines
UEENEEG033A – Solve problems in single and three phase low voltage electrical
apparatus and circuits
UEENEEG063A – Arrange circuits, control and protection for general electrical
installations
UEENEEG101A – Solve problems in electromagnetic devices and related circuits
UEENEEG102A – Solve problems in low voltage a.c. circuits
UEENEEG103A – Install low voltage wiring and accessories
UEENEEG104A – Install appliances, switchgear and associated accessories for low
voltage electrical installations
UEENEEG105A – Verify compliance and functionality of low voltage general electrical
installations
UEENEEG106A – Terminate cables, cords and accessories for low voltage circuits
UEENEEG107A – Select wiring systems and cables for low voltage general electrical
installations
UEENEEG108A – Trouble-shoot and repair faults in low voltage electrical apparatus and
circuits
UEENEEG109A – Develop and connect electrical control circuits
UEENEEK142A – Apply environmentally and sustainable procedures in the energy
sector
CPCCOHS1001A – Work safely in the construction industry
UEENEEC010B – Deliver a service to customers
UEENEED101A – Use computer applications relevant to a workplace
UEENEEF102A – Install and maintain cabling for multiple access to telecommunication
services
UEENEEG111A – Carry out basic repairs to electrical components and equipment
UEENEEH102A – Repairs basic electronic apparatus faults by replacement of
components
UEENEEH111A – Troubleshoot single phase input d.c. power supplies
UEENEEI150A – Develop, enter and verify discrete control programs for programmable
controllers
The above list includes units being offered at OTEN and that are required to complete this
qualification. Other TAFE NSW colleges may offer different elective options. If licensing in
another State other than NSW is required, please check requirements with the relevant State.
Do I need additional resources to study this course?
1300 362 346 or (02) 9715 8333
oten.tafensw.edu.au
You will require textbooks. They are:
Electrical principles by Peter Phillips for the theory subjects - ISBN: 9780170220163 – approx
cost $90.00 (as of Jan 2013)
Electrical Wiring Practice Vol 1 and 2 for the practical subjects. ISBN 978-007028643-6 and
978-007028641-2 – approx cost $160.00 for both (as of Jan 2013)
Alternative text books if you have already obtained these or have access to these is electrical
trade principles ISBN: 978-0-7339-9394-7
The preferred Scientific calculators are a Casio FX82AU Plus or FX100AU/ Scientific – approx
costs - $20.00 - $40.00
Computer/Software Requirements
You will need a computer or regular access to an IBM compatible computer or Apple Mac with
up to date virus protection and:
• access to a broadband internet connection (preferable) or dialup internet connection to obtain
resource material for several units, to access the Online Learning Support (OLS) site and to
contact teachers and access the Online Classroom
• email access
• at least 128MB RAM
• Windows 2000 or later/Mac OSX
• Microsoft Office 2000 or later
• MS Internet Explorer 5 or later /Safari/Firefox/Google Chrome
• Adobe Acrobat Reader – available free from the Adobe website
You may use your local council library or use your TAFE ID card to access any NSW TAFE
library
Your learning materials will be provided in:
You can download them online from OTEN Learning Support (OLS).
This qualification is completed by:
You must complete:
• assignment work which you should submit
• on a regular basis, and
• written and/or online tests, and
• either/both work based skills assessments or attendance at Mount Druitt TAFE College WSI
for a simulated workplace skills assessmen
How much is the course?
$419 per semester
Plus the $50.00 OTEN Student Materials and Handling charge.
Due to a policy change on 1 July 2013 enrolling students must have a NSW residential address
or be employed within NSW to be eligible to access government subsidised training places in
TAFE NSW. For full details of this new policy see oten.tafensw.edu.au/enrolling/fees-andfinancial-assistance/fees-and-charges/.
1300 362 346 or (02) 9715 8333
oten.tafensw.edu.au
Important information for 2015
From 2014 there will be a staged implementation of Smart and Skilled, including the
introduction of an entitlement to government subsidised training from 1 January 2015. For more
information on Smart and Skilled and how it may affect the fees you pay in 2015, please visit
www.training.nsw.gov.au/smartandskilled/index.html.
For full details on TAFE NSW fees please visit our page.
http://oten.tafensw.edu.au/enrolling/fees-and-financial-assistance/
Are there any additional costs?
You will need to purchase text books and a scientific calculator approximate cost $290.
Please also be advised that some units require a SKILLS ASSESSMENT fee of $75.00 per
assessment period, for those who cannot provide work placed based skills assessments, your
attendance is required at Mt Druitt TAFE for practical assessments.
How do I enrol?
To apply for this course please click on the Apply now button below. You will need to contact
the Engineering Services Teaching section on (02) 9715 8469 to confirm you are currently
employed in the Electrotechnology industry. Students who are not currently employed are
advised to enrol in Course No. 20214 Certificate II Electrotechnology (Career Start).
Apply now (click below)
oten.tafensw.edu.au/mrhzr
I would like to talk to someone before I enrol
Please contact The Engineering teaching section: [email protected] (02) 9715
8469 or 1300 650 240
We are committed to enhancing all students' prospects to reach their potential and achieve a
positive future. We recognise that for some students additional support services are
fundamental to ensure success. We have the following expert support services available which
you may access by calling (02) 9715 8446 or 1300 655 993 to make an appointment:
Counselling and Career Development, Disability, Aboriginal, Multicultural, Outreach, Adult
Basic Education and Open Learning Centre Support Services.
Need help deciding?
Our free online career and study planning tool can help.
You will receive a personalised career and study profile based on your responses. If you would
like to discuss your results in person, please contact our Counselling and Career Development
Unit by calling 1300 655 993 or 02 9715 8446. To get started click the link below:
●
http://www.careervoyage.com.au/oten
Current as at 15/10/2014
1300 362 346 or (02) 9715 8333
oten.tafensw.edu.au