Extendable Arm Wall Mount for 26” ~ 42” TVs KAWLM42EXTA Caution

Extendable Arm Wall Mount for 26” ~ 42” TVs
KAWLM42EXTA
Quick Start Guide
Caution
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children.
•
•
•
•
•
Make sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of the installation,
please contact a professional installer for assistance.
The wall or mounting surface must be capable of supporting the combined
weight of the mount and the display, otherwise the structure must be
reinforced.
Safety gear and proper tools must be used. A minimum of two people are
required for this installation. Failure to use safety gear may result in
property damage, injury or death.
Please ensure children do not play with the mount or the mounted
television at any time.
Please check the mount every two months to ensure that bolts and screws
are tight, and that the wall behind the mount appears to be in good
condition.
This product was designed to be installed on solid concrete walls.
Before installing, make sure the wall will support the combined load of the
equipment and hardware.
Never exceed the maximum load capacity of 25kg, or it may result in product
failure or personal injury.
Note: this product is intended for indoor use only. Use of this product outdoors
could lead to product failure or personal injury.
Item Checklist
What's in the box
M4 x 10mm
A (4 pcs)
M5 x 12mm
B (4 pcs)
M5 x 16mm
C (4 pcs)
M5 Washer
G (8 pcs)
B1 (3 pcs)
B2 (3 pcs)
B3 (3 pcs)
Magnetic removable
bubble level
M6 x 12mm
D (4 pcs)
TV Plate
Tools required
Mounting
Step 1-A
(Solid concrete mounting)
M6 x 16mm
E (4 pcs)
M6 x 20mm
F (4 pcs)
Step 1-B
Wood stud mounting
Step 2 Attaching brackets to Screen
Step 3 Hang TV onto the wall plate
Before attaching the TV plate to the wall, tighten
the top screw nut in case the TV slides off
during installation.
Tighten the screw nut
•
•
If using A, B, C please use G.
If using D, E, F please don't use G.
Before tightening security nut 3, please be sure
that the TV can be adjusted smoothly after
being mounted on the stand.
If not, please adjust the nut to get the best
feeling for adjustment.
Step 4
If you require any additional information regarding the mount or require
assistance in regards to a warranty claim, please contact the Kogan customer
support team.