 video converter series IP on ALTERA, LATTICE and XILINX FPGA

 video converter series
 IP on ALTERA,
LATTICE and XILINX FPGA
CANCamGigE-CL
• CameraLink Base to GigE Vision Converter
• Max Data rate: 200 MB/s (LingAggregation)
• Serial Camera Configuration over GigE
CANCamU3V-CL
• CameraLink Base to USB3 Vision Converter
• Max Data rate: 350 MB/s
CANCamCXP-CL
• CameraLink Base to CoaXPress Converter
• Max Data rate: 2laneCXP3, 600 MB/s
GigE Vision
• XILINX ISE: CANCam-GigE camera series
• XILINX Vivado: GEV DEVICE on SVDK
• IEEE1588 light- and camera synchronization
USB3 Vision
• LATTICE Diamond: U3V on ECP3
CoaXPress
• ALTERA Quartus: CXP DEVICE on ARRIA5
• XILINX Vivado: CXP10 on KC705
Fields of Application
• camera development
• Optical Inspections applications
• frame grabber development
• Quality Assurance applications
• custom CMOS/CCD sensor interface
• Space and MIL applications
Sensor to Image GmbH – Lechtorstrasse 20 – 86956 Schongau - Germany
[email protected] - www.sensor-to-image.de
VISION 2014 Booth 1A43
 ≥10GBit connectivity
 web shop with S2I FMC/HSMC modules
GEV: 10BaseT-R
•
•
•
10GBit over copper
20m 3Watt, 100m 5W PHY power
FPGA with 3.125GBit SERDES needed
GEV: SFP+
•
•
•
10GBit over fiber
20m 1Watt, 500m 3W SFP+ module power
FPGA with 10.625GBit SERDES needed
CXP6, CXP10/α-version
•
•
CXP6: max. 25G over 25m at ≤1W IF power
CXP10: max 10G over 20m at 1/3W IF power with
CXP2 in 2015
all nicely explained at XILINX K7 in WP453
GEN<I>CAM hardware support
•
•
•
•
•
•
•
HSMC modules for standard ALTERA FPGA boards
with CMOS, GEV and CXP interfaces
FMC module for standard XILINX FPGA boards with
CMOS, GEV, U3V and CXP interfaces
reference hardware platforms are used for AIA and
JIIA standard testing
CameraLink, 1/2/10Gbps GEV, 5Gbps U3V, up to
25GBit CXP boards are available
each hardware comes with a full reference design
to be available early 2015 for an easy start into
standard machine vision interfaces
shipped direct and worldwide to B2B customers
Fields of Application
• camera development
• Optical Inspections applications
• frame grabber development
• Quality Assurance applications
• custom CMOS/CCD sensor interface
• Space and MIL applications
Sensor to Image GmbH – Lechtorstrasse 20 – 86956 Schongau - Germany
[email protected] - www.sensor-to-image.de
VISION 2012 Booth 1A43