EL5600 Series Electric Actuator Description Available types

Transcription

EL5600 Series Electric Actuator Description Available types
EL5600 Series Electric Actuator
for 1/2" to 4" K & L Series Valves
Description
1
The EL5600 series electric actuators are reversible having linear output.
Available types
Linear
Actuators
Control
Valves
The actuators are available with 3 supply variants. 230 Vac,115 Vac and
24 Vac. The standard version is suitable for VMD (Valve Motor Drive)
input power signal. If required the actuator can be fitted with a positioner
input card that can accept 4 - 20 mA or 2 - 10 Vdc control signals.
The actuators are fitted as standard with 1kΩ potentiometer. This can
either be used in conjunction with the positioner for 2 - 10 V or 4-20
mA input signals, or as feedback for VMD. Also available are auxiliary limit switches and anti-condense heater. See TI-P358-06 US for
futher details on the accessories.
These actuators can be used with the SPIRA-TROL valve range with
an appropriate valve adaptor and mounting flange.
2
Note: A mounting flange and valve adaptor is required to mount the actuator to a valve. See the associated tables below.
Mounting flange selection
EL560_, EL561_,
EL562_, EL563_,
EL564_, Actuator
EL565_ actuator
1/2" to 2" valves
EL5970 2-1/2" to 4" valves
EL5971
EL5972
Valve adaptor
Mounting
flange
Materials
No. 1
2
Part Case
Housing
Material
Polycarbonate
Die-cast aluminum
Valve adaptor selection
Valve size
1/2" to 2"
2-1/2" to 4"
Actuator type
EL560_
EL561_
Valve stem
M8 thread
EL5901
EL5911
M12 thread
EL5902
EL5912
EL562_
Valve adaptor type
EL5921
EL5922
EL563_
EL564_
EL565_
EL5931
EL5932
EL5941
EL5942
EL5945
Technical data
Model EL560_ EL561_ EL562_ EL563_EL564_ EL565_
Supply voltage
230 Vac / 115 Vac / 24 Vac + 10%
Supply frequency Hz
50 / 60
50 / 60
50 / 60
50 / 60
50 / 60
50 / 60
53 / 53
Power consumption VA*
9.2 / 10.4
10.9 / 12.6
25 /27
(24 V supply
78 / 78
142 / 142
is 36 VA)
Enclosure rating
IP65 (For outdoor installations provide adequate shelter)
Actuator speed mm/s
0.25
0.5
0.5
0.5
0.6
1.0
Actuator thrust maximum
.738 ft.lbs (1kN)
1.47 ft.lbs (2kN)
3.3 ft.lbs (4.5 kN) 5.9 ft.lbs (8kN) 8.8 ft.lbs (12kN) 18.4 ft. lbs (25kN)
Ambient limits
-4° to 140°F (-20 to + 60°C) -4° to 120°F (-20 to +50°C) with positioner card fitted
MotorAsynchronous capacitor reversing motor
Terminations
1.5 mm
ManualHandwheel
Conduit entries
2 x PG13
3 x PG16
Positioner power consumption
1.0 VA
2
* Power consumption is relative to 50 / 60 Hz respectively.
Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only.
In the interests of development and improvement of the product, we reserve the right to change the specification.
178
TI-P358-07-US
08.11
EL5600 Series Electric Actuator
for 1/2" to 4" K & L Series Valves
Approvals
This equipment is CE marked, and conforms to EN 50081-1 and EN 50082-2 (EMC), EN 61010-1/A2 (Safety), following the provisions of directives
89/336/EEC amended by 92/31/EEC and 93/68/EEC (EMC) amended by 93/68/EEC (LVD).
Class IV Shut-off
PTFE and Graphite Stem Seals
Actuator
EL5601-2-3
EL5611-2-3
EL5621-2-3
EL5631-2-3
EL5641-2-3
EL5651-2-3
Maximum Differential Pressures (psi)
¾"
1"
1¼"
2"
3"
½"
1½"
2½"
4"
PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph
432
215
319
149
185
71
150
61
39
18
740
740
740
718
567
452
445
357
167
128
109
81
47
20
22
5
7
740
740
740
740
740
486
448
337
309
175
149
104
87
58
48
740
470
656
628
354
328
219
202
130
120
740
740
559
533
350
334
212
201
740
740
740
740
478
467
EL5601-2-3
EL5611-2-3
EL5621-2-3
EL5631-2-3
EL5641-2-3
EL5651-2-3
Maximum Differential Pressures (psi)
¾"
1"
1¼"
2"
3"
½"
1½"
2½"
4"
PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph
644
427
508
337
339
225
262
174
113
74
80
53
42
16
27
10
16
740
740
740
740
721
606
558
469
241
202
171
144
93
67
60
43
37
26
740
740
740
740
560
522
399
372
222
194
142
125
88
78
740
470
718
691
401
375
256
240
160
149
740
740
606
580
388
371
241
231
740
740
740
740
507
497
Class IV Shut-off
Bellows Stem Seals with PTFE and Graphite Secondary Packing
Actuator
EL5601-2-3
EL5611-2-3
EL5621-2-3
EL5631-2-3
EL5641-2-3
EL5651-2-3
Maximum Differential Pressures (psi)
¾"
1"
1¼"
2"
3"
½"
1½"
2½"
4"
PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph
71
740
740
35
740
740
740
740
717
740
629
740
279
727
740
241
688
740
187
506
740
160
479
740
57
237
442
740
31
211
413
740
27
142
274
700
11
126
257
684
81
163
429
71
152
418
Linear
Actuators
Actuator
Control
Valves
Class VI Shut-off
PTFE and Graphite Stem Seals
Class VI Shut-off
Bellows Stem Seals with PTFE and Graphite Secondary Packing
Actuator
EL5601-2-3
EL5611-2-3
EL5621-2-3
EL5631-2-3
EL5641-2-3
EL5651-2-3
Maximum Differential Pressures (psi)
¾"
1"
1¼"
2"
3"
½"
1½"
2½"
4"
PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph PTFE Graph
283
740
67
740
223
740
52
740
149
740
34
740
115
740
26
740
49
368
740
10
330
740
35
262
582
740
235
554
740
114
293
499
740
88
267
472
740
Spirax Sarco, Inc., 1150 Northpoint Blvd., Blythewood, SC 29016 • Phone: (803) 714-2000 • Fax: (803) 714-2222
© Spirax Sarco, Inc. 2003
73
188
319
740
56
171
302
729
45
117
199
464
TI-P358-07-US
35
107
188
454
08.11
179
EL5600 Series Electric Actuator
for 1/2" to 4" K & L Series Valves
C
Selection example
B
Control valve
1/2" KEA43 2 port valve
Maximum ∆P200 psi
electrical supply
230 Vac
Control signal
4 - 20 mA
Actuator selectedEL5601
Positioner requiredEL5961
Valve adaptorEL5901
Mounting flangeEL5970
Dimensions and weights
A
(4.5)
(4.8)
(5.2)
(7.0)
(10.0)
(20.0)
Linear
Actuators
Control
Valves
approx. in inches & pounds (mm & kg)
Model
A
B CWeight
EL560_
18.1 (460)
6.9 (177) 5.4 (138)
9.9
EL561_
18.1 (460)
6.9 (177) 5.4 (138)
10.5
EL562_
18.1 (460)
6.9 (177) 5.4 (138)
11.4
EL563_
19.9 (605)
6.9 (177) 5.9 (150)
15.4
EL564_
22.4 (569)
8.8 (225) 9.0 (231)
22.0
EL565_
31.7 (807)
8.9 (227) 11.0 (280)
44.0
Spirax Sarco, Inc., 1150 Northpoint Blvd., Blythewood, SC 29016 • Phone: (803) 714-2000 • Fax: (803) 714-2222
180
TI-P358-07-US
08.11