PN1000 Series Spring Extend Pneumatic Actuators Description

Transcription

PN1000 Series Spring Extend Pneumatic Actuators Description
PN1000 Series Spring Extend Pneumatic Actuators
(for LE/LEA and KE/KEA Valves 2-1/2" to 4")
Description
A range of single spring linear actuators having 2 diaphragm
sizes for matching the requirements of different valves at
various differential pressures. Each actuator is fitted with a
combined mechanical stroke indicator and anti-rotation guard.
The actuators are designed for easy conversion from spring
extend to spring retract, and vice versa, without the need for
special tools.
Available types
Spring extend spindle actuators:
PN1500 and PN1600 series.
Control
Valves
Technical data
Temperature range -20°C to +110°C (-4°F to +230°F)
Maximum operating pressure 4.5 bar (65 psi)
Air supply connection PN1500 and PN1600 1/4" NPT
6
4
Linear
Actuators
Materials
No.
1
2
3
4
5
6
7
8
9
10 11 12 13
14
15 16 17 Part Diaphragm housing Diaphragm Diaphragm plate Spring Spindle guide Bearing
Yoke Housing securing nuts and bolts
Spindle Connector Travel indicator Lock plate ‘O’ ring Lock-nut Cap with vent hole
Spring location washer Valve spindle adapter Material
Carbon steel
Reinforced nitrile rubber
Stainless steel
Spring steel
Bronze
Hardened steel
Cast steel
Zinc plated steel
Stainless steel
Zinc plated steel
Stainless steel
Zinc plated steel
Nitrile rubber
Zinc plated steel
Nickel plated brass
Zinc plated steel
Stainless steel
15
1
8
2
16
3
13
5
9
14
7
10
11
Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only.
In the interests of development and improvement of the product, we reserve the right to change the specification.
164
12
17
TI-P320-57-US
6.07
PN1000 Series Spring Extend Pneumatic Actuators
Differential pressures for LE/LEA and KE/KEA series valves and PN1000 series actuators (spring extend)
Note: The differential pressures stated in the tables below are limited by the maximum operating pressures of the selected control valve.
In certain circumstances with a reduced Cv value, or where reduced valve stroke is acceptable, it may be possible to increase the maximum
differential pressure above that shown in the table by special setting of the actuator. Please consult Spirax Sarco.
LE and LEA, KE and KEA valve size
2-1/2"34"
Travel mm 30 20
30 20
30 20
Valve capacity*
Full Cv Reduced Cv Full Cv
Reduced Cv Full Cv
Reduced Cv
74
42
29.3 18.7
117
74
42
29.3 187 117
7442
Differential pressures shown apply to valves with standard PTFE stem seals or
bellows sealed stems with either metal-to-metal or PTFE soft seat.
Actuator Spring Positioner Travel range model required
PN1523A320 mm 30-60 Yes -
PN1533A330 mm 30-60
Yes
560
PN1653B430 mm 30-60
Yes
725
Maximum differential pressure (psi)
725
-
-
725
-
-
725
-
-362
-
535
-
560
725
725
-
-
725
-
-
-
226
336
-
-
362 560
535 725
725
-
-
Differential pressures shown below apply to valves with high temperature graphite (H) stem seals and metal-to-metal seats.
Actuator Spring Positioner Travel range required
Maximum differential pressure (psi)
model PN1523A320 mm 30-60 Yes -
725
725
725
-
-
725
725
-
PN1533A330 mm 30-60
Yes
557
-
-
-361 557
-
-
224
PN1653B430 mm 30-60
Yes
725
-
-
-
533 725
-
-
335
-
-
361 557
533 725
725
-
-
* For fast opening, low noise and anti-cavitation trims use Full Cv column.
Control
Valves
Installation
Actuators should be mounted on the valve with the stem in a
vertical position. Installation and Maintenance Instructions are
supplied with the product.
Spare parts
Information regarding available spare parts is given on TI-P357-20 US.
Linear
Actuators
PN1000 series actuator selection table
Selection should be made in conjunction with the differential
pressure chart shown above and the following code:
Actuation PN Actuator action 1
Diaphragm size PN
= Pneumatic
= Spring to extend1
5
6
5
Actuator travel 2 3
Spring range 3 = 20 mm (3/4")2
= 30mm (1-3/16")
= 2.0 to 4.0 bar (30 to 60 psi)
3
Yoke type A
= Type A for valve sizes:
DN65-100 (2-1/2" to 4")
PN1
523
A
A
How to order
Example: 1 off Spirax Sarco PN1523A actuator, set to 30 to 60 psig.
Dimensions/weights
approximate in mm (inches) and kg (pounds)
Actuator PN1500 PN1600 A
405 (16") 465 (18-5/16")
B
C
513 (20-3/16") 150 (6")
515 (20-1/4")
150 (6")
D
231 (9")
231 (9")
E
204 (8")
204 (8") Spirax Sarco, Inc., 1150 Northpoint Blvd., Blythewood, SC 29016 • Phone: (803) 714-2000 • Fax: (803) 714-2222
© Spirax Sarco, Inc. 2003
Weight
55 (121)
70 (154)
TI-P320-57-US
6.07
165