WV-IS XL Activated carbon pellets Applications
Transcription
WV-IS XL Activated carbon pellets Applications
WV-IS XL Activated carbon pellets Applications Viledon® WV-IS XL pellets are premium gas-phase extruded 4 mm carbon pellets made from wood. The pore structure of wood derived activated carbon creates versatile pellets that can be used for the adsorption of hydrogen sulfide, chlorine, sulfur dioxide and other acid gases from air. It also has the ability to remove low concentrations of odors. This 4 mm diameter extruded pellets are used in vapor adsorbers in industries such as pulp and Contaminant gases paper, refineries and grain, to protect rooms from corrosive gases such as hydrogen sulfide and sulfur dioxide. Safety Always refer to the Safety Data Sheet for detailed information on safety. For SDS information, visit us at www.freudenberg-filter.us. Properties ASTM hardness Ash 94 % 18 mg /min 0.15 mg 1.1 Density (dry basis) lb / ft3 ∼ 25.3 Density (as shipped) lb / ft3 ∼ 30 Dust attrition coefficient Initial dust Pellet shape cylindrical Viledon® WV-IS XL pellets are especially recommended for all contaminant gases highlighted in blue Choose other pellets for all contaminant gases marked in grey 1 Hydrogen sulfide (H2S) 2 Sulfur dioxide (SO2) 3 Other oxides of sulfur 4 Nitrogen oxides (NOX) 5 Chlorine 6 Ammonia 7 Formaldehyde 8 Hydrocarbons 9 Mercaptans 10 Low molecular weight organic acids 11 Volatile organic compounds (VOCs) If you require information and pellet selection assistance for contaminant gases not listed here, please consult your Viledon® partner. Pellet diameter mm 4.3 Caution Ignitition temperature ASTM °C 354 Butane activity % 27.0 Never enter tanks or other confined areas containing wet activated carbon. Wet activated carbon will adsorb oxygen and asphyxiation may result. H2S capacity (lbs H2S / ft media) – at 1 PPM H2S, 100 ft /min 2.0 ft3 1.4 3 Packaging Boxes The figures given are mean values subject to tolerances due to the normal production variances. Our explicit written confirmation is alwaysrequired for the correctness and applicability of the information involvedin any particular case. Subject to technical alterations. 02 - GP - 289 - November - 2014 - US At a glance Our further Viledon® pellet product range CCP 104 2 9 10 3 4 CCP 610 7 5 CCP 108 1 2 9 10 3 4 2 9 10 3 4 7 1 7 1 2 3 2 2 8 11 4 8 11 CCP 830 CCP 310 1 11 CCP 810 CCP 210 1 8 3 4 CCP 840 5 1 CCP 510 2 5 8 11 CCP 903 6 5 Pellets are especially recommended for all contaminant gases highlighted in blue 1 Hydrogen sulfide (H2S) 7 Formaldehyde 2 Sulfur dioxide (SO2) 8 Hydrocarbons 3 Other oxides of sulfur 9 Mercaptans 4 Nitrogen oxides (NOX) 10 Low molecular weight organic acids 5 Chlorine 11 Volatile organic compounds (VOCs) 6 Ammonia Freudenberg Filtration Technologies L.P. Hopkinsville KY, 42240 / USA Phone 1 800 348 7196 | Fax 1 270 887 5114 [email protected] | www.freudenberg-filter.us Please note: Other pellets are available on request – especially custom formulations with impregnations for specific contaminants gases. All application information provided are subject to on-site conditions, specific application requirements and potential alternating effects by combining several Viledon® pellets in multi-stage units. Please consult your local Viledon® partner for further information. Replaces all previous issues of this data sheet. Viledon® is a registered and protected trademark of Carl Freudenberg KG. 1