HyDrAulIC AND PNEuMATIC SySTEMS: eaRlY BiRD

Technology Training that Works
Practical
Hydraulic and
Pneumatic Systems:
Operations and Troubleshooting
A 2-day practical workshop presented by:
Shane Rutherford
CPEng RPEQ
darwin
10 & 11 November 2014
Only $
1995
per person
including GST
EARLY BIRD
BOOKING OFFER
TOTAL VALUE TO YOU - $473
Book by 13 October 2014 and
you will receive 10% off the full
registration price + 4 ebooks
each with hundreds of pages of
engineering knowledge
• Practical Mechanical Seals Selection, Maintenance and
Troubleshooting
• Practical Mechanical Drives (Belts,
Chains and Gears) for Engineers
and Technicians
• Practical Project Management for
Engineers and Technicians
• From Engineer to Leader
plus
our
4-for-3
BOOKING OFFER
Register NOW:
Been to an IDC workshop before?
- Attend this workshop and you’ll receive 5% off the registration price!
You will learn how to:
• Work with basic hydraulic and pneumatic components
• Understand essential hydraulic and pneumatic terms and understand their key
applications
• Describe the characteristics of fluid used in hydraulic systems and air used in
pneumatic systems
• Understand how the basic hydraulic components function in a hydraulic circuit and
how the basic pneumatic components function in a pneumatic circuit
• Read hydraulic and pneumatic schematics
• Perform simple circuit design using standard symbology and functions such as
automatic return, logic control, speed control, pressure sequencing, reduced
actuator forces and timing
• Discuss the correct operation, control sequences and procedures for the safe
operation of various simple hydraulic and pneumatic systems
• Troubleshoot simple hydraulic and pneumatic system problems
• Make simple repairs to hydraulic and pneumatic systems
• Minimise forced outages and prevent serious damage to hydraulic and pneumatic
equipment
• Outline the latest technologies available for electro hydraulic and pneumatic
systems
Who should attend:
• All those who plan to make a career in
hydraulics and pneumatics
• All those working with hydraulics and
pneumatics systems
• Consulting engineers
• Design engineers
• Mechanical engineers and technicians
• Operation, maintenance, inspection
and repair managers, supervisors and
engineers
• Plant engineers
• Plant operations and maintenance
personnel
• Process technicians
AUSTRALIA • CANADA • india • IRELAND Malaysia • NEW ZEALAND • SINGAPORE • SOUTH AFRICA
UNITED KINGDOM • UNITED STATES • VIETNAM
Email the registration form to us at [email protected]
For more information contact 1300 138 522 or visit www.idc-online.com
Practical Hydraulic and Pneumatic Systems:
Discount Offer
SAVE $1995
Book four delegates
pay for three!
Register three people on a
public two-day workshop and
receive your fourth registration
FREE
* discounted and free registration to be
used for the same workshop
in the same venue
PLUS 5 eBooks of
your choice!
Every delegate will also receive
5 eBooks of their choice
from IDC’s technical library
– valued at $420!
About IDC Technologies
With a portfolio of over 300 workshops
specialising in the fields of industrial data
communications, electrical and mechanical
engineering, automation and control, we have
trained over 500,000 engineers, technicians
and technologists over the last 20 years.
We have an enthusiastic team of professionals
in offices conveniently located around the
world, who are committed to providing the
highest quality of engineering and technical
training.
Visit our WEB SITE
www.idc-online.com to download
FREE software and technical information
An intensive, practical 2-day workshop presented by
Shane Rutherford
CPEng RPEQ
Shane has an extensive mechanical engineering background, having worked in diverse
industry sectors including farming, shipping, heavy construction, sugar milling, mining, bulk
handling and engineering services.
He has served in the Royal Australian Navy and worked for a number of businesses in
capacities as diverse as engineering trades, professional engineering and management.
Shane is trade qualified in fitting and machining, and diesel mechanics. He has operator
certification in naval auxiliary machinery and is professionally qualified as a Mechanical
Engineer. Shane has also attained recognition as a Chartered Professional Engineer and is
registered on the National and Queensland Professional Engineers Registers.
Formerly a Manager of Metlabs Queensland Branch for Leighton Ltd and a Business Unit
Manager for PearlStreet Ltd, Shane now operates his own business consulting and service
providing to clients across Australia.
Shane has extensive hands-on experience in mechanical, hydraulic and pneumatic systems
and has specialised in reliability engineering, lubrication, lubricants and machine condition
assessment.
The workshop
This workshop on hydraulics and pneumatics will enhance your knowledge of the fundamentals,
improve your maintenance programs and help you become an excellent troubleshooter of the
problems in this area. No matter what hydraulics or pneumatics applications you are working
on, and what the level of your knowledge, the workshop will be highly beneficial to you.
The practical hydraulics and pneumatics workshop is a comprehensive, highly practical and
interactive workshop. You will have an opportunity to discuss construction of hydraulic and
pneumatic systems, design-applications, and learn operations, maintenance and management
issues. You will be provided with the most up-to-date information and best practice in dealing
with the subject.
Pre-requisites
This is not an advanced workshop but one focusing on the fundamentals so knowledge of
basic mechanical plant and operation thereof and some exposure to hydraulic and pneumatic
systems would be helpful but is not essential. Pre-course reading will be provided for you if you
have no knowledge whatsoever.
The fee for each workshop covers all materials
including workshop manual, lunches
and refreshments
On-Site Training
All IDC Technologies training workshops are
available on an on-site basis, presented at
the venue of your choice, saving delegates
travel time and expenses, thus providing
your company with even greater savings.
SAVE MORE THAN 50% OFF
the per person cost!
2-day courses start from $6,000
FOR UP TO 6 PEOPLE and can be
customised to your needs.
Have the training delivered
WHEN AND WHERE you need it!
For more information or a FREE detailed
proposal contact:
Kevin Baker on 1300 138 522 or
email: [email protected]
Practical sessions
This is a practical, hands-on workshop enabling you to work through exercises which reinforce
the concepts discussed.
To gain full value from this workshop, please bring your laptop/notebook computer.
Free reference manual
as a hard-copy and eBook (Valued at $223.90)
Our delegates don’t just receive photocopied notes!
You will receive the comprehensive fully illustrated reference manual,
as a hard-copy and eBook version, filled with hundreds of pages of
tables, charts, figures and handy hints.
Operations and Troubleshooting
The program
Day ONE
Day ONE continued
Day TWO
HYDRAULIC SYSTEMS
FLOW CONTROL VALVES
•Functions of flow control valve
•Classification of flow control valves (nonpressure compensated and pressure
compensated)
•Location of flow control valve (metre-in,
metre-out and bleed-off circuits)
SEAL DESIGN IN HYDRAULIC SYSTEMS
•Classification and types
•O-rings and their applications
•Common seal materials
•Reasons for seal failures
INTRODUCTION TO HYDRAULICS
•Origin of hydraulics and classification
FUNDAMENTALS
•Force, work, power, energy, mass, weight,
torque, density, specific gravity, specific
weight, basic hydraulic principles,
properties of fluids, viscosity
PRESSURE, PRESSURE LAWS AND FLOW
•Hydrostatic principles
•Pascal’s Law and applications
•Pressure-force relationship
•Fluid flow and flow rate
•Bernoulli’s equation
HYDRAULIC PUMPS
•Principle of pump operation
•Classification (positive and non-positive
displacement)
•Standard parameters for pump selection
•Gear, vane, gerotor, lobe pump
•Piston: radial piston, axial piston, fixed
displacement and variable volume, bent
axis pumps
•Pressure, flow and efficiencies of pumps
HYDRAULIC MOTORS
•Principle of motor operation
•Performance characteristics of hydraulic
motors
•Classification of hydraulic motors •Gear, vane, piston motors
•Difference between hydraulic motors and
hydraulic pumps
•Specifications of hydraulic motors
•Efficiency of hydraulic motors and their
sizing
HYDRAULIC CYLINDERS
•Classification (single and double acting)
•Construction of cylinders
•Sealing systems used in cylinders
•Design of cylinders
•Common cylinder problems
DIRECTION CONTROL VALVES
•Functions of direction control valves and
their classification
•Valve symbols
•Valve elements: reciprocating spools,
rotary spools, poppet type
•Spool valve element: characteristics and
position changeover
•Centre conditions
•Non-Return Valves (NRV)
•Check valve
•Spool valve (rotary and sliding valves)
PRESSURE CONTROL VALVES
•Classification of pressure control valves
•Pressure relief valves (pressure regulating
and emergency relief)
•Pressure reducing valves
ELECTRO-HYDRAULIC SYSTEMS
•Proportional solenoid valves: technology
and operation
•Types of proportional valves (direction
control, flow control and pressure control
valves)
•Servo valves: first and second stage use
of transducers in hydraulic systems
•Comparison of proportional and servo
valves
HYDRAULIC ACCESSORIES
•Hydraulic oil reservoirs types (pressure
and non-pressure types)
•Hydraulic filters
•Hydraulic tubes, hoses and fittings
•Hydraulic accumulators HYDRAULIC FLUIDS
•Types of hydraulic oils
•Oil additives
•Common problems with hydraulic oils
(cavitation, aeration, foaming)
•Oil sampling and oil cleanliness
•Monitoring oil and removing
contamination
HYDRAULIC CIRCUITS
•Types of hydraulic circuits
•Symbols used in hydraulic circuits
•Pump unloading circuit
•Pressure control circuit
•Counterbalance circuit
•Regenerative circuit
•Pre-fill and compression relief circuit
MAINTENANCE AND TROUBLESHOOTING
HYDRAULIC SYSTEMS
•Commissioning
•Maintenance
•Troubleshooting
PNEUMATIC SYSTEMS
AIR PREPARATION, GENERATION AND
DISTRIBUTION
•Characteristics of air
•Air generation, preparation and distribution
•Characteristics of pneumatic systems
SYMBOLS AND STANDARDS
•Standards for pneumatic systems
•Symbols used in pneumatic systems PNEUMATIC ELEMENTS
•Basic structure of pneumatic control
system
•Components of pneumatic systems
•Compressors
•Directional control valves
•Flow control valves
•Other control valve types
•Actuators and output devices
•Cylinders (single and double acting)
BASIC CIRCUIT DESIGN
•Operation of single and double-acting
cylinders
•Timing system for cylinder extend and
retract cycle
•Speed and safety control systems
TROUBLESHOOTING AND FAULT FINDING
PNEUMATIC SYSTEMS
•Maintenance requirements for pneumatic
systems
•Guidelines for maintenance of system
components
•Troubleshooting pneumatic system
problems
SUMMARY, OPEN FORUM
AND CLOSING
Practical Hydraulic and Pneumatic Systems: Operations and Troubleshooting
Delegate Details
Contact:
Company Name:
Company Address:
Suburb:
State:
Post Code:
Phone:
Fax:
Email:
Job Title:
Email:
Mr/Ms:
Job Title:
Email:
Mr/Ms:
Job Title:
Email:
Mr/Ms:
Job Title:
Email:
Attendees:
Mr/Ms:
Should you have more people interested in attending this workshop, please contact us via email: [email protected]
Workshop Details
Payment Details
Note: Prices are INCLUSIVE of GST
Please Note: Full payment is required prior to the commencement of the workshop.
Darwin - 10 & 11 November 2014
Mantra on the Esplanade, Darwin
BOOKING FOR ONE DELEGATE:
1
$1995 x ______
delegates = $______________
BOOKING FOR four DELEGATES:
The fourth participant is FREE
3
$1995 x ______
delegates = $______________
Early bird booking offer: (if booking on or before 13 October 2014)
YES, I qualify and would like to receive my 4 FREE eBooks
PLUS 10% OFF the registration price
less 10%= $______________
Please register by 20 October
to avoid disappointment
Total= $______________
I wish to pay by Cheque, made payable to IDC Technologies
Company Order Number: __________________________________
How did you hear about this
workshop? (PLEASE TICK)
Please charge my
Mastercard Searched online (Google, Yahoo etc)
Cardholder’s Signature
Recommended by a friend/colleague
On the reverse of your card, above the signature,
is a security number. In order to authorise your
card transaction, we require the last 3 digits:
Other (please specify) ________________________
______________________________________________
If the Cardholder's address
is not the same as shown
above please tick this box:
billing information (PLEASE invoice to)
My billing information is the same as above in 'DELEGATE DETAILS'
Discount offer - save $1995
- book 4 delegates, pay for 3!
Please send invoice to: Company Name:
Register three people on a public two-day workshop and
receive your fourth registration FREE
Company Address:
* discounted and free registration to be used for the same
workshop in the same venue.
Suburb:
Mail:
IDC Technologies
PO Box 1093
West Perth WA 6872
Workshop details
• Workshops start at 8:30am and finish at 5:00pm daily.
• Registration is from 8:00am on the first day.
• The workshop fees are per delegate and include a reference
manual, handouts, lunches and all refreshments.
• Full payment is required prior to the commencement of the
workshop.
State:
Email:
[email protected]
Cancellation
A fee of 20% will apply for written cancellations received
7-14 days prior to the commencement of the workshop.
Cancellations received less than 7 days prior to the workshop
are not refundable however substitutes are welcome. Early Bird BOOKING Offer
Please note that the Early Bird Booking Offer is only available
to those registrations received by 13 October 2014 and paid
prior to the commencement of the workshop.
Please Note
Venues to be confirmed upon registration. Venues are subject
to change. Instructors may change without notice.
IDC Technologies has no affiliation with suppliers or
manufacturers and therefore presents a completely unbiased
factual view of the industry.
Confirmation
Confirmation of receiving your registration will be sent within
48 hours. Official confirmation and details of the workshop
will be sent to you prior to the workshop date. Please wait for
official confirmation before making accommodation and/or
travel arrangements.
100% MONEY BACK GUARANTEE
IDC Technologies’ engineers have put considerable time and
experience into ensuring that you derive the maximum value
from each workshop. If you feel by lunch time of the first day
that the workshop is not appropriate, please let us know so
that we can arrange a 100% refund of your fee.
BooKiNg CoDe: EA-OD
Expiry Date: ____/_____
Cardholder’s Name:
Received an email from IDC
Fax:
1300 138 533
______________________________________________________________
Received a brochure in the mail
Register
Now:
Visa
Web Site:
www.idc-online.com
Post Code:
Enquiries:
Phone:
1300 138 522
ABN 78 003 263 189
Privacy Information
If your address details are incorrect, or you wish to remove
your name from our mailing list, please contact us by phone,
fax or email.
At times we make use of lists that cannot be cross-checked
against our own database and you may receive a duplicate.
If so, please pass this on to an interested colleague.
Continuing Professional Development (CPD)
This program is designed to meet your continuing
professional development requirements. A certificate
documenting your attendance will be awarded at the
end of the workshop. This serves as important evidence
of your continuing professional commitment to your
career. This workshop may count towards fulfilling
your Engineers Australia CPD obligations – Engineers
Australia’s CPD Policy can be found at their website:
http://www.engineersaustralia.org.au/