Gateway Application Setup Oracle FLEXCUBE Universal Banking Release 11.3.0 [May] [2011]

Transcription

Gateway Application Setup
Oracle FLEXCUBE Universal Banking
Release 11.3.0
[May] [2011]
Table of Contents
1.
SETTING UP GATEWAY FOR ORACLE FLEXCUBE ......................................................................................... 1-1
1.1
INTRODUCTION ......................................................................................................................................................... 1-1
1.2
SETTING UP GATEWAY EJB APPLICATION ................................................................................................................ 1-1
1.2.1
Prerequisites .................................................................................................................................................... 1-1
1.2.2
Building EAR File ............................................................................................................................................ 1-1
1.3
SETTING UP GATEWAY MDB APPLICATION ............................................................................................................. 1-5
1.3.1
Prerequisites .................................................................................................................................................... 1-5
1.3.2
Building EAR File ............................................................................................................................................ 1-5
1.4
SETTING UP GATEWAY HTTP APPLICATION .......................................................................................................... 1-10
1.4.1
Prerequisites .................................................................................................................................................. 1-10
1.4.2
Building EAR file ........................................................................................................................................... 1-10
1.5
SETTING UP GATEWAY WEB SERVICE APPLICATION .............................................................................................. 1-13
1.5.1
Prerequisites .................................................................................................................................................. 1-13
1.5.2
Building EAR File .......................................................................................................................................... 1-14
2.
POST BUILDING ACTIVITY..................................................................................................................................... 2-1
2.1
INTRODUCTION ......................................................................................................................................................... 2-1
2.1.1
Deployment Using Oracle WebLogic Application Server................................................................................ 2-1
2.1.2
Deployment Using IBM WebSphere Application Server.................................................................................. 2-1
1.
1.1
Setting up Gateway for Oracle FLEXCUBE
Introduction
This chapter explains the steps for setting up the Gateway Application for Oracle FLEXCUBE.
1.2
Setting up Gateway EJB Application
This section explains the methods of setting up Gateway EJB Application.
1.2.1 Prerequisites
You need to create the following gateway EJB property files before building the application:

gw_ejb_logger.xml

GW_EJB_Prop.xml
For details, refer to the section ‘Gateway EJB Application’ in chapter ‘Setting up Property Files’.
1.2.2 Building EAR File
In order to build EAR file for Gateway EJB Application, you need to follow the steps given below:
1. Launch Oracle FLEXCUBE Universal Installer. The welcome screen is displayed.
2. Choose the Application ‘Oracle FLEXCUBE Gateway’. Click ‘Next’.
The following screen is displayed:
1-1
3. Choose ‘Build EAR File’. Click ‘Next’. The following screen is displayed:
4. Choose ‘Oracle FLEXCUBE Gateway EJB’. Click ‘Next’.
1-2
Specify the following details:
Source Directory
Specify the location of the source directory.
Eg: Source_Dir\Gateway
The location of the source directory can be remote or local.
Destination Directory
Specify the location of the destination directory. The source files from the software will be copied to this
location.
Eg: D:\Testing\source\dest
Application Name
Specify the EAR name of the application.
The application name should not contain special characters and space. However, you may use ‘_’
(usnderscore).
Eg: GWEJB
EAR File Path
Specify the location at which the EAR file should be saved.
1-3
Property File Path
Specify the location at which the property files are available.
After specifying the property file path, click ‘Load’ button to load the property file.
Click ‘Next’.
The EJB reference name will be ‘{APPLICATIONAME}_GW_EJB_Bean’ and the JNDI name will be
‘{APPLICATIONAME}/ejb/GW_EJB_Bean’.
For example, consider that the application name is GWEJB. In that case EJB and JNDI names will be as
follows:

EJB reference name: GWEJB_GW_EJB_Bean

JNDI name: GWEJB/ejb/GW_EJB_Bean
5. In case of a distributed schema, the following screen is displayed.
6. Specify the Datasource Name and click ‘ADD’ button to include it. You can also exclude an already
added datasource by selecting it and clicking the ‘DELETE’ button.
1-4
7. Click ‘Next’. The following screen is displayed:
8. Choose one of the following options:

Continue Installation: If you choose this, the Installer will navigate you to the Oracle FLEXCUBE
Welcome screen.

Finish Installation: If you choose this, the Oracle FLEXCUBE Installation process will be
terminated.
The EAR file will be saved to the destination directory.
1.3
Setting up Gateway MDB Application
1.3.1 Prerequisites
You need to create the following gateway MDB property files before building the application:

gw_mdb_logger.xml

GW_MDB_Prop.xml
For details, refer to the section ‘Gateway MDB Application’ in chapter ‘Setting up Property Files’ (04PropertyFile_Setup).
In order to build EAR file for Gateway MDB Application, you need to follow the steps given below:
1-5
10. Choose the Application ‘Oracle FLEXCUBE Gateway’. Click ‘Next’. The following screen is displayed:
11. Choose ‘Build EAR File’. Click ‘Next’.
1-6
12. Choose ‘Oracle FLEXCUBE Gateway MDB’. Click ‘Next’. The following screen is displayed:
Source Directory
1-7
location.
Application Name
Eg: GWMDB
EAR File Path
Property File Path
Is the Destination MQ Series
Check this box to indicate that the destination is a MQ series. If you check this, you need to specify the
binding file path also.
Binding File Path
Specify the binding file path. This is applicable only of you have checked the option ‘Is the Destination
MQ Series’.
Eg: file://D:/bindings
Once you have specified the above details, click ‘Load’ button and then click ‘Next’.
1-8
13. In case of a distributed schema, the following screen is displayed.
14. Specify the Datasource Name and click ‘ADD’ button to include it. You can also exclude an already
added datasource by selecting it and clicking the ‘DELETE’ button.
1-9

Welcome screen.

terminated.
1.4
Setting up Gateway HTTP Application
1.4.1 Prerequisites
You need to create the following gateway HTTP property files before building the application:

gw_http_logger.xml

GW_HTTP_Prop.xml
For details, refer to the section ‘Gateway HTTP Application’ in chapter ‘Setting up Property Files’ (04PropertyFile_Setup).
1.4.2 Building EAR file
2. Choose the Application ‘Oracle FLEXCUBE Gateway’. Click ‘Next’.
1-10
3. Choose ‘Build EAR File’. Click ‘Next’. The following screen is displayed:
4. Choose ‘Oracle FLEXCUBE Gateway Servlet’. Click ‘Next’.
1-11
Source Directory
location.
Application Name
Eg: GWHTTP
EAR File Path
1-12
Property File Path

Welcome screen.

terminated.
1.5 Setting up Gateway Web Service Application
1.5.1 Prerequisites
You need to create the following gateway HTTP property files before building the application:

gw_ws_logger.xml

GW_WS_Prop.xml
1-13
For details, refer to the section ‘Gateway Web Services Application’ in chapter ‘Setting up Property Files’
04-PropertyFile_Setup.
You must create the environment variables for the corresponding application. For details, refer to the
section ‘For Gateway Web Service Application Building’ in chapter ‘Setting up Oracle FLEXCUBE
Installer’ (02-Installer_Installation).
1-14
2. Choose the Application ‘Oracle FLEXCUBE Gateway’. Click ‘Next’. The following screen is displayed:
3. Choose ‘Build EAR File’. Click ‘Next’.
The following screen is displayed.
1-15
4. Choose ‘Oracle FLEXCUBE Gateway WebServices’. Click ‘Next’. The following screen is displayed.
5. Specify the Application Name for the required Web Services. Check ‘Include’ to include the selected
Web Service.
By default, the Oracle FLEXCUBE Universal Installer displays the service name as the application
name. However, you can modify this.
1-16
7. Specify the following details:
Source Directory
Eg: Software_Source\Gateway
location.
EAR File Path
Property File Path
8. After specifying the property file path, click ‘Load’ button to load the property file. Click ‘Next’.
9. Oracle FLEXCUBE Universal Installer completes the build processes for the selected services.
10. In case a service fails during the build process, the following screen is displayed.
You can view the list of failed services in the log file as shown below.
1-17
11. Click ‘OK’. The following screen is displayed.

Welcome screen.

terminated.
1-18
2.
2.1
Post Building Activity
Introduction
This section introduces you to the activities to be carried out after setting up the gateway applications.
2.1.1 Deployment Using Oracle WebLogic Application Server
For details on the manual deployment using Oracle WebLogic Application Server, refer to the chapter
‘Gateway Application with WebLogic’ (GATEWAY_Applications_WL).
2.1.2 Deployment Using IBM WebSphere Application Server
For details on the manual deployment using IBM WebSphere Application Server, refer to the chapter
‘Gateway Application with WebSphere’ (GATEWAY_Applications_WAS.doc).
2-1
Gateway Application Setup
[May] [2011]
Version 11.3.0
Oracle Corporation
World Headquarters
500 Oracle Parkway
Redwood Shores, CA 94065
U.S.A.
Worldwide Inquiries:
Phone: +1.650.506.7000
Fax: +1.650.506.7200
www.oracle.com/ financial_services/
Copyright © [2011] Oracle Financial Services Software Limited. All rights reserved.
No part of this work may be reproduced, stored in a retrieval system, adopted or transmitted in any form or by any means,
electronic, mechanical, photographic, graphic, optic recording or otherwise, translated in any language or computer language,
without the prior written permission of Oracle Financial Services Software Limited.
Due care has been taken to make this document and accompanying software package as accurate as possible. However, Oracle
Financial Services Software Limited makes no representation or warranties with respect to the contents hereof and shall not be
responsible for any loss or damage caused to the user by the direct or indirect use of this document and the accompanying
Software System. Furthermore, Oracle Financial Services Software Limited reserves the right to alter, modify or otherwise change in
any manner the content hereof, without obligation of Oracle Financial Services Software Limited to notify any person of such
revision or changes.
All company and product names are trademarks of the respective companies with which they are associated.

Gateway Application Setup Oracle FLEXCUBE Universal Banking Release 11.3.0 [May] [2011]

Transcription

Similar documents

Strategies for Infusing Global Concepts and Content into the K

10559 Adv_spread Woestijn.indd

Flexcube Testing1

Document 6465206

Prescott Gateway Mall

AT the weekly operations meeting at the Merry Moo Milk co... the

Epi-Otic®

JO US! IN

Data tel Gateway 2.0

Hearos Ad Award-2h_a

Oracle FLEXCUBE Investor Servicing® Development Overview Guide Release 12.0.3.0.0