High Definition Car DVR User Guide DVR Configuration

High Definition Car DVR
User Guide
Ver:11
DVR Configuration
1.MIC port
2.Mute button
5.DVR button
6.HOME button
9.USB port
10.AV IN port
13.SENSOR
3.GPS button
7.Reset button
11.TF card slot1
4.power button
8.Power indicator
12. TF card slot 2
Functions of Buttons
Mute button
Press it shortly can turn on/off the sound
GPS button
Press it shortly will turn into the GPS navigation interface
1.
<Power> Button
Function 1: Power on/off
In power-off state, press and hold <Power> for three seconds, the DVR is
powered on. In power-on state, press and hold <Power> for three seconds, the
DVR saves the file automatically and is powered off.
Function 2: Close the display backlight
In any state, press <power> shortly will close the backlight of the display,
and press it again the backlight will be turn on.
DVR button
Press the button will enter the car dvr interface.
HOME button
Press the button shortly can back to main interface.
Reset button：
If the DVR is crashed, press <Reset> to power off the DVR.
Introduction of main interface
1.car dvr entrance
It is the main features for the A10 products. Click this area, enter for using
car dvr, it will bring you different user experience.
2.GPS entrance.
Click it one time can enter the default navigation system.
3. Blue tooth entrance
Click it one time will enter the setting interface.
4. The application list entrance
Click it shortly will enter the system as well as the installation program list.
Can click here to enter other application, it is fast and convenient. Pictures as
below:
5.mini music player
Click the icon can control the playing of songs, if the songs had been
download in the product or in SD card, it will also be smart to get cover songs.
6.Function setting
Click to enter the setting interface.
7.Entrance of FM launch
With the Innovative FM transmission techniques, click to enter. When
FM opened, can set the frequency after click the small page button.
8.Navigation selection
Click it to set the application, especially the default navigation settings.
9. picture, video playing
The area will get and show the pictures if there are pictures in the SD
card, see the picture as below:
Operation Guide
I：Installing the DVR
1.
2.
Power off the automobile engine
Insert the TF card into the TF card slot
【Note】Please use a well-branded high-speed TF card(Class 10 or above)
with a capacity of at least 512MB. The TF card supports a maximum of
64GB).
3.
Secure the DVR to the rear mirror of the automobile.
4.
Insert the in-vehicle charger into the cigar lighter of the automobile
【Note】Run up the charging cable along one stage of the windscreen
when wiring.
5.Install the back camera in the back of the automobile, keep an eye on
the direction when installing. Wiring along the roof of the car. Insert the
back camera into the slot on the DVR after installing.
6. Adjust the angle of the dvr, ensuring that the camera lens keeps level
with the ground.
7.Start up the engine and check whether the DVR is mounted properly.
【Note】If installing it correctly, the indicator will light. The recorder icon
will glitter if it comes into video recording. Please check that if the picture in
the screen is normal. If the picture is inverted image, please contact us rapidly.
Function Description
1.Operating mode
in the video recording mode, sliding this button can switch the video recording
and photograph.
2.Channel switch
There modes for selecting: front camera, back camera, dual camera.
3.Loop video recording
The loop video recording time can be settled as 1 minute, 2 minutes, 5 minutes,
OFF. When settled as OFF, the video can’t be coverd.
4.Video quality
The video can be settled as VGA, 720P, 1080P.
5.Picture quality
In photograph mode, the picture can be settled as 100W, 200W, 300W,500W.
6.White balance, exposure, color
About the white balance, please select it accordingly.
7.Color select
Color selecting including default, black and white, puce, negative, sketch, sky
blue.
8.Time the watermark
When it opened, the time and date will show on the video and the pictures.
9.Speed watermark
When it opened, the speed watermark will show in the last place of time
watermark.
10.Motion detection
Open the motion detection, it will record automatically when detecting the
scene changed. And it will also stop recording after the scene not change for 20
seconds.
11.Video mute
When it opened, there is no voice in the video.
12.Recording automatically when powered on.
If it was selected, it will record video automatically after the program started.
13.The program started automatically
Select it, the program will start automatically after the DVR get the power. And
if you also select the “recording automatically when powered on”, it will also
record video automatically.
14.Picture in picture function(when connect to the back camera, you will
see the video in a small window.
When choose the function, you will see the scene of front and back camera in
big and small windows. As the picture shows below:
15.Shutdow automatically after powered off.
When choose the function, the DVR will pop-up a dialog box indicating it will
shut down after 10 seconds after powered off. Choosing “NO” will stop shut
down, choosing “YES” or don’t choose any option, the DVR will shut down
after 10 seconds.
16.G-sensor setting
The sensitivity setting can be set as normal, sensitive and very sensitive. As the
picture below:
17.Intelligent detection shutdown Settings
Intelligent detection shutdown: Choose the option, In the case of parking but
powered on, , The dvr will shutdown to save energy if the recorder can’t detect
changes in the picture for some time.
18.Reversing function
Whenever reversing, the car camera will switch to the back camera, It can be
adjusted the balance up and down, please use it according to the actual
situation.
19.Small window mode
When exit, choose” small window”, it can be set as small window mode. As in
the picture, the small window float on the top of the screen. You can switch
the front and back camera by click the button on the top left corner. Move the
small window to the lower left corner the window can be closed. Double-click
the small window into the car dvr program.
20.Floating icon mode
Under the small window mode, floating icon will appear after sliding off a
small window, click to re-open the small window.
21.USB mode
It will show the picture after it connected to computer by a USB cable, click
SD card to choose whether to open the SD card storage devices.
22.Bluetooth phone
Remember to match the Bluetooth name: VINYOO-J04, the default Bluetooth
pass code: 0000, When connect successfully, you can use Bluetooth phone, and
you can also upload the contacts from the cell phone to the car dvr. the address
book on the phone can be uploaded to the recorder.
23.Wireless remote control key definition
1、Click shortly to open the emergency lock key.
2、Click shortly to open car dvr.
3、Click shortly to return to the main interface.
4、Click shortly to enter the map navigation.
5、Press the on / off screen backlight.
6、Click shortly to answer the call.
Product specification
Camera
Viewing Angle
Rear Camera Pixel
Video Frame Rate
Video Compression
Video Output Format
Screen
Storage Temperature
Operating Temperature
Operating Humidity
Memory
Power
2 megapixels
120 degree
FHD2592X1080
30FPS@HD1080P、30FPS@HD720P
H.264
NTSC/PAL
5 inch
-20℃~60℃
-10℃~60℃
15-65%RH
4GB～64GB
DC5V
Warmth statement:
The instructions provided is just for reference only, During using, please according to
the products you received. If it caused fines or traffic accident duo to using the product, our
company does not assume any responsibility.
The car dvr support loop recording, please save important data in time. This product
does not exclude the possibility that unforeseen circumstances in the course, if there is no
record video or image data, our company does not assume any responsibility.
At the same time, we also advocate a civilized traffic, obey traffic rules. By buying this
product deemed to have to comply with this statement