AirPRO Dust Evacuation Nut

AirPRO Dust Evacuation Nut
Problem:
dust left behind
after processing.
Without AirPRO dust accumulates in cut.
balanced to 24,000 RPM at G2.5
• greatly reduces airborne dust and dust on the floor
• cleaner workpiece and safer work environment
AirPRO evacuates dust directly into hood.
• use with ER32, ER40 or SYOZ25 collet chucks
Dust removal can become a time-consuming health
and safety problem if the dust extraction on your CNC
router is inadequate. The new AirPRO from NAP GLADU
removes dust from nested cutting operations so it never
has a chance to accumulate. Sawdust is ventilated
directly into the CNC dust collection hood by the AirPRO,
leaving a cleaner cut and clean air behind.
AirPRO Specifications
Learn more:
http://ow.ly/BnPe3
FRONT
BACK
Contact your local NAP GLADU location at
one of the numbers below for more information.
Part No.
Description
Min RPM
Max RPM
D
L
H
h
Weight
18T-6001
ER32 AirPRO
18,000
24,000
1.97"
3.77"
1.77"
1.24"
1.1 lb
18T-6101
ER40 AirPRO
18,000
24,000
2.48"
4.06"
1.81"
1.13"
1.4 lb
18T-6201
SYOZ25 AirPRO
18,000
24,000
2.36"
3.92"
1.97"
1.13"
1.3 lb
Warranty: AirPRO is guaranteed to perform as described, but must be used with on-size precision ER collets and tightened
to torque specifications above using a tightening stand, torque wrench and proper adapter or warranty becomes invalid.
LITNGAIRPROFLY2014
USA – 10 Locations
1180 Wernsing Road
Jasper, Indiana 47546 USA
Toll Free: 1 (800) 547-7468
Tel: (812) 482-2000
Fax: (800) 457-7458
email: [email protected]
CANADA – Maireville
2115 rue Saint-Césaire
Marieville (Qc) Canada J3M 1E5
Toll Free: 1 (800) 363-9117
Tel: (450) 460-4481
Fax: (450) 460-2655
email: [email protected]
CANADA – Toronto
222 Evans Ave
Toronto, (Ont.) Canada M8Z 1J8
Toll Free: 1 (888) 251-2236
Tel: (416) 251-2236
Fax: (416) 251-7268
email: [email protected]