Controller and power supply units
Transcription
Controller and power supply units
A PASSION FOR PERFECTION Controller and power supply units The Digiline gauges can be powered by the power supplies of the HiPace turbopumps, which drive up to 16 gauges. The control unit DGP 202 can drive up to two gauges and features a display to readout the pressure data of the two measuring channels. Measurement & Analysis / Measurement / DigiLine DPG 202, Controller and power supply unit for up to 2 gauges Controller with integrated power supply for max. two DigiLine gauges LCD graphic display, backlit 2 two-way contacts Similar Image Dimensions Technical Data DPG 202, Controller and power supply unit for up to 2 gauges Connection for gauge Dimensions w x h x d Display Display rate Mains requirement: frequency (range) Mains requirement: voltage (range) Measurement rate Power consumption Protection category Set point: Changeover contact, potential-free Set point: Voltage max. Temperature: Operating Temperature: Storage Unit of measure Weight M12 (19 mm | (0.75 inch LCD, backlit 2 Hz 50/60 Hz 95-265 V AC 10 Hz max. 25 (gauges included) W IP 20 2 pieces 250 V AC, 4 A; 45 V DC, 2 A 5-50 °C | 41-122 °F | 278-323 K -20-60 °C | -4-140 °F | 253-333 K mbar, bar, Pa, hPa, mTorr, Torr 0.75 kg | 1.65 lb Order number Controller and power supply units www.pfeiffer-vacuum.com PT G12 020 Page 2 Measurement & Analysis / Measurement / DigiLine Accessories Adapter and power switching components M12 m plug 4-pole with screw terminals RS-485 Interface and extension cables Interface cable, M12 m straight / M12 m straight, 3 m Mains- and supply cables Mains cable, Swiss plug, 2.5 m Mains cable, U.K. plug, 2.5 m Mains cables Mains cable 115 V AC, NEMA 5-15 to C13, 3 m Mains cable 230 V AC, CEE 7/7 to C13, 3 m RS-485 Connector M12 to RS-485 Termination Resistor for RS-485 Y-Connector M12 to RS-485 Soft- and Firmware Software DokuStar, 2 channels www.pfeiffer-vacuum.com PT 348 106 -T PM 061 283 -T P 4564 309 YR P 4564 309 Y1 P 4564 309 ZE P 4564 309 ZA PM 061 270 -X PT 348 105 -T P 4723 010 PT 882 500 Page 3 Pfeiffer Vacuum stands for innovative and custom vacuum solutions worldwide, technological perfection, competent advice and reliable service. Complete range of products From a single component to complex systems: We are the only supplier of vacuum technology that provides a complete product portfolio. Competence in theory and practice Benefit from our know-how and our portfolio of training opportunities! We support you with your plant layout and provide first-class on-site service worldwide. Are you looking for a perfect vacuum solution? Please contact us: Pfeiffer Vacuum GmbH Headquarters · Germany T +49 6441 802-0 [email protected] www.pfeiffer-vacuum.com All data subject to change without prior notice. (12/22/2014) Vacuum solutions from a single source