Berkeley Alternative Workwear Brochure - eurotec

Alternative
Corporate
Workwear
Brochure
Suppliers to Construction Fit-out Rail
9001
14001
18001
50001
Accredited
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Cert No.300383/0451
Association of
Interior Specialists
Eurotec Group Ltd
Maldon Road,
Essex CM3 6LF
T+ 44(0)1621 744740
E [email protected]
W www.eurotec-group.co.uk
High visibility c/w logo
Class 2 to EN471
Small - XX Large
Leo Superior High Viz Vest c/w Logo
Deeper arm holes
Scooped sides allowing pocket
Access
ID Pocket
Mobile phone pocket
2 front bellowed storage pockets
Double pen pocket with D ring
High Visibility Interactive Bodywarmer c/w Logo
Conforms to EN471 Class 2:2
Conforms to EN 343 Class 3:1
2 band & brace
300D Oxford fabric with PU coating
Polyester/cotton quilted lining
Heavy duty zip fastening
Inner phone pocket
Back designs for each company
ROMAN HOUSE
SAFFRON
CITY OF LONDON
SQUARE
LONDON
SAFFRON SQUARE - BACK
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
ONE TOWER BRIDGE - BACK
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
ROMAN HOUSE - BACK
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
Corporate Clothing
Premier Work Tie c/w logo
100% polyester
Blade width 8cm
Length 144cm
Regatta Women’s Thor III Full
Zip Fleece c/w logo
280 Series anti-pill symmetry fleece
Fleece cuffs
2 zipped lower pockets
Adjustable shockcord hem
Shaped fit
Thor III Full Zip Fleece c/w logo
Womens Uproar Softshell c/w logo
Uproar Softshell c/w logo
280 Series anti-pill symmetry fleece
Fleece cuffs
2 zipped lower pockets
Adjustable shockcord hem
Warm backed woven stretch softshell fabric
Durable water repellent finish
Wind resistant
Quick drying fabric with super soft handle
2 zipper lower pockets
Adjustable shockcord hem
Lightweight and easy to wear
Shaped fit
Warm backed woven stretch softshell fabric
Durable water repellent finish
Wind resistant
Quick drying fabric with super soft handle
2 zipper lower pockets
Adjustable shockcord hem
Lightweight and easy to wear
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
Corporate Clothing
Dickies Boston Workwear Jean
New and improved fit
5 pocket western style
100% cotton washed denim
440gsm
Workwear Trousers
Two front pockets
Twin hook & bar fastening at waist
Flat front sewn-in front crease
Rear buttoned back pocket
Twin belt loops reinforced extra strength
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Cargo Trouser With Knee Pads
2 side & 2 rear pockets with velcro
Twin hook & bar fastening at waist
Knee pad pockets with bottom opening
Flat front with sewn in front crease
Wide twin belt loops
Long Thermal Socks
Gentle welt for comfort
Offers protection against cold conditions
Looped terry for extra warmth and comfort
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
HEAD PROTECTION
Technical Specifications / Requirements
Centurion Vision Plus Hard Hat
This safety helmet includes a fully retractable visor, Terylene cradle and the
Hydro-Flock high absorbency sweatband. The unique design of the vision visor
allows prescription glasses to be worn underneath the visor, due to the
large space between the visor and the face.
The Vision Plus offers the same protection features as the well established
Vision helmet but now features a new moulded visor with additional benefits
Safety Helmets
A safety helmet is required in any location where there
is a residual risk of a head injury from being struck by
falling objects, or where protection from a penetration
injury is required.
Bump Caps
Bump caps do not offer sufficient protection from falling
objects, and as such must never be used where the
above residual risks remain.
Shelf Life
In order to comply with the necessary European
Standards (see Below),all safety helmets are stamped
with either the quarter or month, and the year that they
were manufactured.
If the helmets are stored in the boxed they were
delivered in and not exposed to extremes of
environment, then the shelf life of the helmet is not
limited. What is important to remember, however, is
that manufacturers recommend that the helmet must
not be in use 5 years after the date of manufacture.
Care and Maintenance
If required, a helmet may be cleaned with soap and
water and dried with a soft cloth. Never use abrasive
substances or solvents, and never store a helmet in
direct sunlight, or where it may come.
Centurion Spectrum Hard Hat
Specialised Safety Helmet with Integrated Over Spectacles providing grade B medium energy impact protection.
Into contact with chemicals
Operatives that wear safety helmets should inspect
them regularly, and if the shell has anything more than
superficial abrasions or scuffing, it must be replaced
with a new one.
European Standards
The helmets are approved to EN:397, which covers
its performance standard for the following items:
- Shock absorption
- Resistance to penetration
- Flame retardant
- Chinstrap anchorage
European Standard Markings
440v a.c. and 1000v a.c.
The helmet will protect against short term, accidental
contact with live electrical conductors up to this voltage.
LD (Lateral Deformation)
The helmet will afford a modicum of protection from
lateral compressive loads.
MM (Molten Metal)
The helmet will offer a degree of protection against
molten metal.
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Gloves
Skytec Toro
Ideal for detailed assembly,
light fabrication and precise
handling of small components.
Durable and thin PU coated palm
Comfortable fit
Excellent freedom of movement
Outstanding dexterity
Breathable back of hand
Digit 1 Cut Level 1 Glove
3 open finger design
Durable and thin PU coated palm
Seamless nylon liner
Enables precise handling
Ideal for dry handling conditions
Highly resistant to abrasion and tears
Outstanding dexterity
Elasticated wrist
G3PU Cut Level 3 Glove
Level 3 cut resistance
Flexible PU palm
Ventilated to keep hands cool
Elasticated wrist
Ideal for dry working conditions
Enables precise handling
Amber colouring
Digit 3 Cut Level 3 Glove
3 open finger design
Level 3 cut resistance
Flexible polyurethane palm
Elasticated wrist
Enables precise handling
Ideal for dry working conditions
T5PU Cut Level 5 Glove
Highest levels of resistance & abrasions
Flexible PU palm
Ventilated to keep hands cool
Elasticated wrist
Outstanding comfort
Ideal for dry working conditions
Enables precise handling of small components
Green colouring for enhanced visibility
Digit 5 Cut Level 5 Glove
3 open finger design
Flexible PU palm
Elasticated wrist
Enables precise handling
Excellent cut protection
Outstanding comfort and dexterity
Ideal for dry working conditions
High level of resistant to abrasion
Green colouring for enhanced visibility
Nitrotouch Gloves
Nitrotouch Gloves offer fantastic
durability and comfort, which is
ideal for a host of tough handling
tasks including warehousing
and construction activities
Conforms to EN 388 levels 4-1-2-2
Nitrile palm dip
High dexterity
Enhanced abrasion resistance
Elasticated knitted cuff
Washable
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Footwear
Safety Hiker Waterproof Boot
Premium water resistant black leather upper
Waterproof / breathable membrane
Lightweight dual density
PU rubber sole
Padded collar and full bellows padded tongue
Quick release lace fastening system
200 joules composite toe cap
Penetration resistant composite midsole
Heat resistant out-sole at 300 celcius
Dewalt Rigger
Padded ankle region
Cushion area to calf region
Twin loops for easy access
Anti bacterial in-sole with dual density seat region
200 joule steel toe cap
Steel mid sole under foot protection
PUR sole resistant to 300 celcius
Chemical resistant sole
Lightweight Chukka Boot
Metal free, lightweight safety chukka
Leather upper with deep padded collar
Dual density PU, oil and acid resistant
Antistatic sole
Excellent slip resistance
Breathable lining
200 joules composite toe cap
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk
Personal Protection Equipment
Footwear
S3 Lightweight Boot (non metallic/composite)
Metal free lightweight safety boot
Water resistant leather upper
Dual density PU
Oil and acid resistant
Antistatic sole
Padded topline and leather tongue
Breathable lining
Penetration resistant textile composite midsole
200 joules composite toe cap
Nubuck Safety Boot
Goodyear welted boot with misdole
Quality honey nubuck leather upper
Sole is heat, acid and oil resistant
Deep padded collar tongue
Penetration resistant steel midsole
200 joules steel toe cap
Safety Wellington Boot
The addtion of the steel midsole and protective
toe caps makes the boot ideal for both
agricultural and construction use
200 joule steel safety toe cap
Penetration resistant steel midsole
High grade PVC/nitrile
Anti-slip & antistatic sole
Oil resistant outsole
Lightweight Furlined Rigger Boot with Scuff Cap
Synthetic fur lined tan leather upper
Padded ankle support for extra comfort & protection
Lightweight dual density PU sole
Antistatic
Oil and acid resistant
200 joules steel toe cap
Full length fur footbed
9001
14001
18001
50001
FS 37588
EMS 516110
OHS 575806
ENMS 575804
Accredited
Cert No.300383/0451
Eurotec Group Ltd
Mayfair Industrial Area, Maldon Road,
Latchingdon, Essex CM3 6LF
T+ 44(0)1621 744740 - F+ 44(0)1621 742207
E [email protected]
W www.eurotec-group.co.uk