ECITB/CCNSG Safety Passport Scheme
Transcription
ECITB/CCNSG Safety Passport Scheme
ECITB/CCNSG Safety Passport Scheme ECITB/CCNSG Safety Passport Scheme The ECITB (Engineering Construction Industry Training Board) facilitate the CCNSG (Client Contractor National Safety Group) Safety Passport training programmes. The aim of the CCNSG Safety Passport Scheme is to ensure a basic knowledge of health and safety for all site personnel to enable them, after appropriate site induction, to work on site more safely with lower risk to themselves and others. RRC are working in partnership with British Safety Services to provide the following CCNSG Safety Passport Training. CCNSG Passport to Safety Courses Available Classroom Birmingham In-company Throughout the UK CCNSG Passport Refresher The ECITB/ CCNSG Passport to Safety is a standardised health and safety training scheme for contractors. The Contractor Safety Training Scheme has been adopted by BP, Corus, Dow Corning, Elf, Esso, Gulf, ICI, Lindsey Oil, National Power, Powergen, Shell, Texaco and many other major industrial companies. The ECTIB/CCNSG Safety Passport Renewal Course is a one day refresher course for those who have already passed the CCNSG Safety Passport Course. Old passports must be brought to the course and handed over, these will then be destroyed and the details passed on to the ECITB register. Course Content Course Content The CCNSG Passport to Safety course covers the following topics: Session 1: Safe Behaviour at Work Unsafe behaviours, Behaviour modification Session 2: Safe Place of Work Hazard & Risk, Control of Risk, Permit to Work Systems, Confined Spaces, Site Vehicles, Fire Session 3: Safe Systems of Work Provision and Use of Work Equipment Regulations (PUWER) 1998, Lifting Operations and Lifting Equipment Regulations (LOLER) 1998, Electricity, Energy and Hazard isolation, Manual Handling Session 4: Safety Problems and Safe Solutions Hand-Arm Vibration ,Noise, Reporting Accidents, First Aid, Hazardous substances, Asbestos, the Environment, PPE and Welfare Provision The CCNG Safety Passport Refresher course interactively reviews the following ten modules: Health and Safety Law, including Permits-To-Work Safe Working Practices Safe Access and Egress Accidents and First-Aid Procedures Fire Precautions and Procedures COSHH and Personal Protective Equipment Manual Handling Noise Working with Cranes and Heavy Equipment Excavation Assessment All candidates must achieve a minimum 80% in the multiple-choice assessment. Entry Requirements The Course has to be taken within three months of the Safety passport expiry date. If not taken within the specified time the full two day CCNSG Safety Passport Course will have to be retaken. Assessment The assessment comprises 5 multi-choice questions per module (50 in total) and candidates must achieve a minimum 80% pass mark. Email: [email protected] Web: www.rrc.co.uk Tel: (+44) 20 8944 3100 ECITB/CCNSG Safety Passport Scheme CCNSG Leading a Team Safely The CCNSG Leading a Team Safely course (Supervisor’s Passport) is available to those who have successfully completed the 2day CCNSG Passport to Safety Course. The overall objectives of the programme are to equip and highlight some basic ‘management skills’ for the working supervisor. This will assist them in controlling all aspects of their work (including health and safety). The course has been created to be both informative and interactive, so assisting delegates to appreciate that what they do does have an impact on health and safety within their area of responsibility. Course Content The CCNSG Leading a Team Safely course covers seven modules: Introduction to course Roles and responsibilities Planning and time management Communication Behavioural aspects of health and safety Control of risk and accident prevention Risk assessment and hazard Assessment During the course there are four auditable exercises, plus an end of course 10 question multiple-choice assessment. Candidates must achieve a minimum 80% in order to pass. Email: [email protected] Passports Successful candidates will be issued with a temporary passport in the form of a credit cardsized certificate which is valid for six weeks. The ECITB (Engineering Construction Industry Training Board) will issue a Permanent Passport within three weeks, which will be valid for three years from the course end date. Details of the passport will be entered into the database maintained by the ECITB. Web: www.rrc.co.uk Tel: (+44) 20 8944 3100 ECITB/CCNSG Safety Passport Scheme Course Dates and Fees Classroom Courses Run in partnership with BSS (British Safety Services) Course Dates & Fees Course CCNSG Passport to Safety CCNSG Passport Refresher CCNSG Leading a Team Safely Email: [email protected] Duration 2 Days 1 Day 1 Day Course Dates Birmingham 8-9 Jan 15 22-23 Jan 15 5-6 Feb 15 19-10 Feb 15 5-6 Mar 15 19-20 Mar 15 30 Jan 15 27 Mar15 13 Mar 15 31 Jul 15 Fee £130 + VAT £125 + VAT £135 + VAT Web: www.rrc.co.uk Tel: (+44) 20 8944 3100