Electronic Locking & Accessories

Transcription

CI/SfB
(31.59)
Tate Colson
tatecolson.co.uk
S P E C I F I C AT I O N
MANUAL
Electronic Locking & Access Control Systems
SECUREFAST
Part of the
Securefast Group
X
DEEDLOCK
PINSON
TATE
COLSON
Deedlock Electromagnetic Locks - Slimline Face to Face
1
Introduction
The Deedlock range of
electronic locking solutions
is a comprehensive
selection of electromagnetic
locks, solenoid bolts,
electromagnetic holdopen magnets and electric
releases. All the electronic
locks are designed to be
used in conjunction with
any of the Colson electronic
access control systems.
A comprehensive range of
access control accessories
is also available as an
integral part of any access
control system.
For outward opening doors
the magnet is mounted as
shown on the underside of
head frame and the armature
to the closing door face.
DEEDLOCK
The Deedlock Slimline range of electromagnetic locks is a comprehensive system of low profile magnets suitable
for a wide range of applications. Features of the Slimline range include:
• Low maintenance with no moving parts
• Simple and quick installation with surface mounted and morticed options (see page 5) suitable for timber or metal doors
Please note, the holding
force of all electromagnetic
locks is dependant on the
specific installation details.
Figures quoted are therefore
nominal.
• Slimline profile produces a neat installation
• Versions available with built-in timer (0 - 90 seconds)
• Suitable for single or double doors, inward or outward opening
• Holding force up to 600 lbs per door leaf (dependant on installation)
• Dual voltage, 12 or 24v DC selectable on-site
• Monitored versions available
• CE marked
• Satin anodised aluminium finish
• Micro version suitable for cupboard doors or lockers
Slimline double magnet
AEM10003
• Safety bolts which prevent magnet from detaching from bracket
Slimline single magnet - AEM10001
Surface Micro magnet - AEM-ML300H
Deedlock Electromagnetic Locks - Slimline Face to Face
2
DEEDLOCK
185
26 12
38
47
500
Double Slimline
250
21
130
Single Slimline
32
38
47
166
8
Surface Micro
40
Installation Options
outward opening using
optional L bracket
outward opening using flat
mounting plate
inward opening using
optional Z & L bracket set
inward opening using optional
architectural Z & L bracket set
Surface mounted magnets
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
300
Low
12/24v DC
360/180
Ideal for cupboards and lockers
600
Medium
12/24v DC
500/250
Secondary security or for low/medium security on internal doors
Slimline - single - monitored
600
Medium
12/24v DC
500/250
Slimline - double - unmonitored
600*
Medium
12/24v DC
1000/500
Slimline - double - monitored
600*
Medium
12/24v DC
1000/500
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
Product ref:
Description
AEM-ML300H
Micro - single - unmonitored
AEM10001
Slimline - single - unmonitored
AEM10002
AEM10003
AEM10004
Typical applications
Surface mounted slimline magnets c/w timer
Product ref:
Description
AEM10001T
Single c/w timer - unmonitored
600
Medium
12/24v DC
500/250
AEM10002T
Single c/w timer - monitored
600
Medium
12/24v DC
500/250
AEM10003T
Double c/w timer - unmonitored
600
Medium
12/24v DC
1000/500
AEM10004T
Double c/w timer - monitored
600*
Medium
12/24v DC
1000/500
Surface mounted slimline magnets c/w door status monitoring
Product ref:
Description
AEM01DS
Single c/w door status monitoring
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
600
Medium
12/24v DC
500/250
Bracket Type
Micro magnets
Slimline magnets
L bracket (door opening out)
AEM-ML BRL
AEMBR008
Z & L brackets (door opening in)
AEM-ML BR01
AEMBR089F
Architectural L bracket (door opening out)
-
AMH590/LA
Architectural Z & L brackets (door opening in)
-
AMH590/ZA
Surface armature plate housing
-
AEMBR018
Flush/Mortice armature plate housing
-
AEMBR019
Armature plate bracket for fixing to glass
-
AEMBR185
Budget Z & L brackets
-
AEMBR089
AMH590/ZA - architectural brackets
AEMBR089F - std. brackets
Deedlock Electromagnetic Locks - Standard Face to Face
3
Please note, the holding
force of all electromagnetic
locks is dependant on the
specific installation details.
Figures quoted are therefore
nominal.
DEEDLOCK
The Deedlock Standard range of electromagnetic locks is suitable for a wide
range of applications on internal and entrance doors.
Features of the Standard range include:
• Low maintenance with no moving parts
• Simple and quick installation of surface mounted magnets suitable for timber or metal doors
• Single version available with built-in timer (0 - 90 seconds)
• Suitable for single or double doors, inward or outward opening
• High holding force up to 1200 lbs per door leaf (dependant on installation) suitable for heavy duty applications
• Dual voltage, 12v or 24v DC selectable on-site
• CE marked
• Safety bolts which prevent magnet from detaching from bracket
Standard double magnet - AEM10060
Standard single magnet - AEM10010
Deedlock Electromagnetic Locks - Standard Face to Face
DEEDLOCK
532
Installation Options
73
58
Standard Double Magnet
266
optional architectural Z & L
brackets
40
73
outward opening using flat
mounting plate
61
15.5
Standard Single Magnet
outward opening using
optional L bracket
185
optional Z & L brackets
Surface mounted magnets
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
Standard - single - unmonitored
1200
High
12/24v DC
500/250
Single entrance/exit doors or high circulation situations
AEM10020
Standard - single - monitored
1200
High
12/24v DC
500/250
AEM10030
Standard - single - double monitored
1200
High
12/24v DC
500/250
AEM10060
Standard - double - unmonitored
1200*
High
12/24v DC
1000/500
Double entrance/exit doors or high circulation situations
AEM10040
Standard - double - monitored
1200*
High
12/24v DC
1000/500
AEM10050
Standard - double - double monitored
1200*
High
12/24v DC
1000/500
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
Product ref:
Description
AEM10010
* per door leaf
Surface mounted single magnets c/w Timer
Product ref:
Description
AEM10010T
Standard - single - unmonitored
1200
High
12/24v DC
500/250
AEM10020T
Standard - single - monitored
1200
High
12/24v DC
500/250
Surface mounted single magnets c/w door status monitoring
Product ref:
Description
AEM10DS
Standard - single with door status
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
1200
High
12/24v DC
500/250
Bracket Type
Standard magnets
Standard L bracket (doors opening out)
AEMBR006
Standard Z & L brackets (doors opening in)
AEMBR026
Architectural L bracket (doors opening out)
AMH594/LA
Architectural Z & L brackets (doors opening in)
AMH594/ZA
Standard surface armature housing
AEMBR016
Armature plate bracket for fixing to glass
AEMBR185
Standard brackets
Architectural brackets
4
Deedlock Electromagnetic Locks - Mortice Face to Face
5
We also offer a range of Micro and
Slimline magnets which can be
either mortice mounted into timber
or metal door frames in sliding door
applications, or can be supplied with
architectural housings for vertical
mounting on single doors or transom
mounting on single or double doors.
DEEDLOCK
Features of the Slimline Mortice magnets include the following:
• Installations are visually improved with flush fitting magnet(s)
• Continuous housings provide improved aesthetics for high quality installations
• Ideal solution for sliding door applications
• Housings can be cut on site to suit door width or door height
• Monitored magnets available
• Suitable for single or double outward opening doors
• Holding force up to 600 lbs per door leaf (dependant on installation)
• CE marked
Slimline mortice magnet
AEM10000
Micro mortice magnet
AEM-ML300
Mortice mounted magnets
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
Micro - single - unmonitored
300
Low
12/24v DC
360/180
Ideal for cupboards and lockers
AEM10000
Slimline - single - unmonitored
600
Medium
12/24v DC
500/250
Ideally suited for sliding doors
AEM10000R
Slimline - single - monitored
600
Medium
12/24v DC
500/250
Ideally suited for sliding doors
Holding
force (lbs)
Usage
Voltage
Current mA
(12/24)
500/250
Transom mounting on single door application
Product ref:
Description
AEM-ML300
Continuous Architectural Housing Magnets
Product ref:
Description
AMG202/AT
Slimline single c/w 1m transom housing - monitored
600
Medium
12/24v DC
AMG202/UM
Slimline single c/w 1m transom housing - unmonitored
600
Medium
12/24v DC
500/250
Transom mounting on single door application
AMG204/AT
Slimline dbl. c/w 1.5m transom housing - monitored
600
Medium
12/24v DC
1000/500
Transom mounting on double door application
AMG204/UM
Slimline dbl. c/w 1.5m transom housing - unmonitored
600
Medium
12/24v DC
1000/500
AMG205/AT
Slimline dbl. c/w 2m vertical housing - monitored
600
Medium
12/24v DC
1000/500
Vertical mounting on single door application
AMG205UM
Slimline dbl. c/w 2m vertical housing - unmonitored
600
Medium
12/24v DC
1000/500
Vertical mounting on single door application
AMG207/AT
Slimline dbl. c/w 2m transom housing - monitored
600
Medium
12/24v DC
1000/500
AMG207/UM
Slimline dbl. c/w 2m transom housing - unmonitored
600
Medium
12/24v DC
1000/500
AMG201/AT
Mortice magnet for AMG200 Series - monitored
600
Medium
12/24v DC
500/250
Spare magnet for AMG200 Series
AMG201/UM
Mortice magnet for AMG200 Series - unmonitored
600
Medium
12/24v DC
500/250
Spare magnet for AMG200 Series
AMH592/L1
L bracket 1m for AMG202 magnet & housing
n/a
n/a
n/a
n/a
Allows transom housing to be fixed to shallow header
AMH592/L2
L bracket 2m for AMG204, AMG205, AMG207
n/a
n/a
n/a
n/a
Allows transom housing to be fixed to shallow header
AEMBR019
Flush/Mortice armature plate housing (for AEM10000)
n/a
n/a
n/a
n/a
Allows armature plate to be fitted flush into the door
Deedlock Electromagnetic Locks - Mortice Face to Face
228
6
35
38
202
181
166
185
21
27
Sliding door
130
8.5
32
38
12
AEM10000
AEM-ML300 Micro Magnet
Morticed into head frame
or frame stop
Deedlock Electromagnetic Locks - Full Length Housings
Magnet Housing - AMG202/UM
48
1000mm magnet housing (Double magnets 1500/2000mm) - can be cut down on site
45
175
182
33
Housing used on outward
opening door
38
AMG202/AT
184
CL
Housing used on outward
opening door with L
bracket
45
175
12.5
190
7
Electromagnetic Shear Locks
Shear locks offer a higher
level of security, with a
holding force up to 2700 lbs,
achieved by a combination
of magnetic holding force
and interlocking pins.
Shear Magnet - AEM/SHEAR-30
Shear locks have the following features:
•
•
•
•
•
•
•
Surface mounted version is simple to install
Mortice shear lock is fully concealed and can be fitted to timber or metal doors (min. door thickness 44mm)
Suitable for single or double swing, single or pairs of doors
Holding force up to 2700 lbs (dependant on installation details)
Can be used horizontally in frame transom or vertically on door/frame jambs
Door and lock status monitoring
CE marked
• Fixing kit available for glass door applications (AMS41SSM only)
• Black/Silver finish
Shear Magnet - AEM/SHEAR-30
33
33
30
266
AEM/SHEAR-30
Deedlock Electromagnetic Shear Locks
8
Shear Magnet - AMS41SFM
25
30
163
30
117
25
AMS41FSM
107
Shear Magnet - AMS41SSM
38
38
38
200
38
AMS41SSM
Shear Magnet - FTSEMS1200M
35
30
163
30
120
32
FTSEMS1200M
116
DEEDLOCK
Shear magnets
Holding
force (lbs)
Security
level
Voltage
Current A
(12/24)
2700
High
12-24v DC
2.2/1.4
n/a
n/a
n/a
n/a
Converts AEM/SHEAR-30 into a surface mounted unit
Mortice compact shear magnet
2200
High
12-24v DC
1.5
Single or double action doors requiring high security
Surface compact shear magnet
2200
High
12-24v DC
1.5
n/a
n/a
n/a
n/a
Allows AMS41SSM to be fixed to a 10 - 12mm glass door
n/a
n/a
n/a
n/a
Adhesive for fixing up to 2 AMS41GF-KIT brackets
2640
High
12-24v DC
1.2/1.6
Product ref:
Description
AMS/SHEAR-30
Mortice shear magnet GS705-30
AGS705/SUR
Surface housing for AMS/SHEAR-30
AMS41SFM
AMS41SSM
AMS41GF-KIT
Glass door bracket for AMS41SSM
AEMGFAD
Adhesive for AMS41GF-BKT
FTSEMS1200M
Mortice compact shear lock
External Electromagnetic Gate Locks
9
Electromagnetic Gate Locks
A range of face to face surface mounted magnets suitable for external
applications with the following features:
•
•
•
•
•
Surface mounted and simple to install
Suitable for external applications such as vehicle and pedestrian entrance gates
Holding force up to 1200 lbs (dependant on installation details)
Reed switch monitoring
CE marked
Gate Lock - AEM/GATE/F/S
DEEDLOCK
Gate Lock - AEM/MINIGATE
Electromagnetic Gate Locks
Holding force (lbs)
Product ref:
Description
AEM/MINIGATE
Face fixed Mini gate lock - monitored
AEM/GATE
Face fixed Gate lock - monitored
AEMGATE/F/S
Side & face fixed Gate lock - monitored
AEMBR046
Z bracket for AEMGATE/AEMGATE/F/S
AEMBR056
Z bracket for AEM/MINIGATE
Usage
Voltage
Current mA
(12/24)
600
Medium
12/24v DC
500/250
Single low security pedestrian gate
1200
High
12/24v DC
500/250
Single vehicle or large pedestrian gate
1200
High
12/24v DC
500/250
Single vehicle or large pedestrian gate
n/a
n/a
n/a
n/a
To fix armature plate to inward opening gate
n/a
n/a
n/a
n/a
To fix armature plate to inward opening gate
222
M20
40
11
42
40
63
44
M20
63
203
203
63
Typical Applications
16
38
16
AEM/MINGATE
62
62
185
185
AEM/GATE
185
AEM/GATE/F/S
Solenoid Bolts
10
a
Solenoid bolts provide a high level of security using a strong steel bolt
which provides a secure physical barrier. They are suitable for use
with most forms of access control but due to the high level of physical
security are more appropriate for higher security access control
systems such as Card & PIN or Proximity & PIN.
b
c
Deedlock AER134 - High security solenoid
bolt with stainless steel faceplate
d
Solenoid bolt features include:
• High security physical barrier with holding forces up to 4400 lbs
• Fully concealed installation suitable for timber or metal doors
• Stainless steel surface housing available for ATSEB250
• Suitable for vertical or horizontal mounting
• Suitable for single or double swing doors
• Dual monitoring of the door position and bolt position
Deedlock AER180 - High security solenoid
bolt with stainless steel faceplate
• Variable Auto-relock time
• Fail Locked and Fail Unlocked versions available
• 12v or 12/24v dual voltage versions available
• CE marked
• Satin anodised aluminium or stainless steel finishes
• Key override version available (Euro profile cylinder not included)
Solenoid Bolts Features
b
c
d
a
Product ref:
Description
AER134
Deedlock stnd. width
Holding Fail Lock/
Monitoring force (lbs) Unlocked
Dual
3000
Unlocked
Kick-In current (A) Holding current (mA) Faceplate
Auto Relock
12/24v
12/24v
width (mm)
Time (sec) Warranty Operating Voltage
0, 2.5 or 5
1 yr
12v DC
1A at 12v
300mA at 12v
38
1A at 12v
300mA at 12v
25
1A at 12v
250mA at 12v
34
AER180
Deedlock slimline width
Dual
1000
Unlocked
0, 3, 6 or 9
1 yr
12v DC
ATSEB1001
Alpro stnd. width
Dual
-
Unlocked
0, 3, 6 or 9
3 yrs
12v DC
AEB1001/SMHKIT
Alpro surface mount kit
n/a
n/a
n/a
n/a
3 yrs
n/a
n/a
n/a
n/a
ATSEB250PTL
Alpro slimline width
Dual
2200
Unlocked
0, 3, 6 or 9
5 yrs
12 - 24v DC
740mA/440mA
120mA/70mA
25
ATSEB250PTO
Alpro slimine width
Dual
2200
Locked
0, 3, 6 or 9
5 yrs
12 - 24v DC
740mA/440mA
120mA/70mA
25
AEB-250/SMHKIT
n/a
n/a
n/a
n/a
5 yrs
n/a
n/a
n/a
n/a
AEB-250/GMB
Alpro glass mount bracket
n/a
n/a
n/a
n/a
5 yrs
n/a
n/a
n/a
n/a
740mA/440mA
120mA/70mA
25
ATSEB250KOPTO
Alpro slimline width*
Dual
2200
Locked
0, 3, 6 or 9
5 yrs
12 - 24v DC
ADB25/PTLOCK
Alpro slimline deadlocking
Dual
2200
Unlocked
0, or 8
5 yrs
12 - 24v DC
1.1A/1.0A
210mA/90mA
25
n/a
n/a
n/a
ADB25/SMHKIT
n/a
n/a
n/a
n/a
5 yrs
n/a
ADB25KO/PTLOCK
Alpro slimline deadlocking*
Dual
2200
Unlocked
0, or 8
5 yrs
12 - 24v DC
1.1A/1.0A
210mA/90mA
25
ADB25KO/PTOPEN
Alpro slimline deadlocking*
Dual
2200
Locked
0, or 8
5 yrs
12 - 24v DC
1.1A/1.0A
210mA/90mA
25
FTB25PLO
Trimec slimline width
Dual
2200
Locked
0, or 8
5 yrs
12 - 24v DC
1.1A/1.0A
210mA/90mA
25
FTB25PTL
Trimec slimline width
Dual
2200
Unlocked
0, or 8
5 yrs
12 - 24v DC
1.1A/1.0A
210mA/90mA
25
FTB25KO/PTO
Trimec slimline width *
Dual
2200
Unlocked
0, or 8
5 yrs
12 - 24v DC
1.1A/1.0A
210mA/90mA
25
FTB38PTL
Trimec stnd. width
Dual
4400
Unlocked
0, or 8
5 yrs
12 - 24v DC
1.4A/1.1A
260mA/105mA
38
* Note: Key override versions do not include a Euro profile cylinder
Electromagnetic Door Hold-Open
11
For internal fire doors which, for reasons of high traffic, or to ease
circulation, are required to be kept open in normal daily use, they may
be fitted with an electromagnetic hold open device. The electromagnet
holds the door in the open position against the power of the door
closing device. They must be used in conjunction with the building's
fire alarm or detection system so that in the event of an emergency
the electromagnet is de-activated and the door will close automatically
under the door closer power to retain the fire door's integrity. Features
of the units include:
b
• Floor or wall mounting options
• CE approved for fire door applications
d
• Integral "kick off" button reduces residual magnetism
• Integral "override" switch
a
• Holding force up to 50kgs
• 24v operation
e
c
Holding
force
Floor mounted c/w armature - black metal
24v
50kg
Description
AEMFDH
a
F150/24 (AVO)
Surface wall mounted c/w armature - black metal
24v
50kg
b
AEM0351
Surface wall mounted c/w armature - white plastic
24v
20kg
c
AEM0352
Surface wall mounted c/w armature - white plastic
230v
20kg
AEMS003
Floor mount bracket for AEM0351/AEM0352
-
-
AEM0362
Surface wall mounted c/w armature - white metal
24v
20kg
AEM0363
Surface wall mounted c/w armature - white metal
230v
20kg
AEMS004
Floor mount bracket for AEM0362/AEM0363
-
-
AEM501F-1B
Flush wall mounted c/w armature - st. steel
24v
11kg
AEM501F-1D
Surface wall mounted c/w armature - st. steel
24v
11kg
AEM501F-1F
Floor mounted c/w armature - st. steel
24v
11kg
45ºº 45º
45
87
46
38.5
51
AEM0351/EM0352
45ºº
45
45º
86
86
51
62
38.5
AEM0361/AEM0362
Power Supplies for Door Hold-Open magnets
25
Product ref:
Description
F161-TR
RGL boxed transformer rectifier - 24v DC - 1A
235 x 250 x 80
F162-TR
235 x 250 x 80
F164-TR
235 x 250 x 80
F159
Tate 24v DC Fire relay 7A (single gang box)
36
51
86
AEM501F-1D
25
60
Dimensions (mm)
51
e
80
AEMFDH
86
d
60
54
95
Voltage
Product ref:
80
Door Hold-Open Electromagnets
Electric Releases
12
Electric releases, when used as an integral part of an electronic access control system, provide the physical means of securing the door. They
must be used in conjunction with either a rim mounted nightlatch or with a mortice nightlatch. See lock compatibility charts on page 33.
Selecting the Correct Release
Selecting the most appropriate release depends on many different
criteria and their relative importance in each application. In general the
following aspects should be considered:
Door type - Fitting to wood and metal doors
Release type - Match the release type to lock type ie. rim or mortice
Configuration - For inward or outward opening application
Fail Locked or Fail Unlocked
Security - Higher holding forces offer higher physical security
Usage - Select for low or medium traffic
Operating voltage - For 12v or 24v - AC or DC
Additional features - including monitoring
Rim Release
Mortice Release
ANSI Mortice Release
Mortice Releases
ANSI Mortice Releases
Designed for use with mortice locks and latches, the mortice electric
release is fitted in place of the normal strike plate on timber or metal
doors. Generally suitable for inward or outward opening doors.
ANSI mortice releases have an additional lip on the opening face which
protects the recessed edge of the door frame. It provides a cleaner
appearance and smoother operation.
Where additional security is required such as a deadlock, versions are
available for use with sash locks.
Rim Releases
During the selection process, the size and throw of the latch must be
checked against the depth of the release.
Rim mounted electric releases are designed specifically for use with
conventional rim nightlatches on inward opening doors. They are
surface mounted in place of the keep supplied with the nightlatch.
ANSI Electric Releases - Deedlock
a
Deedlock Releases - ANSI Mortice Type
a
A range of Deedlock ANSI mortice electric releases designed for use
with mortice latches. There is also a Rim electric release for use with
rim latches. The following featuers are available:
• Suitable for low to medium traffic applications
• Fail locked and fail unlocked versions
d
• ANSI Mortice versions suitable for latches up to 15mm throw*
• Jaw strengths up to 1000 lbs
• 12v DC operation
• Monitoring of latch position (AH111M)
b
• Aluminium or stainless steel finish faceplates
c
DEEDLOCK
Deedlock Releases - ANSI Mortice & Rim
a
b
Max. latch
throw *
Operating
Voltage
Deedlock ANSI mortice release c/w short & long faceplate - low/med traffic applications
15mm
Deedlock ANSI mortice release c/w short & long faceplate - low/med traffic applications
15mm
AER971
Deedlock American style mortice release for timber doors - low/med traffic applications
AER972
Deedlock American style mortice release for timber doors - low/med traffic applications
Product ref:
Description
AST125-FLT
AST125-FUT
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
12v DC
Locked
1000
-
12v DC
Unlocked
1000
-
13mm
12v DC
Unlocked
1000
-
13mm
12v DC
Locked
1000
-
AH111
Deedlock ANSI mortice release c/w short and long faceplates - low/med traffic applications
15mm
12v DC
Selectable
1000
-
c
AH111M
Deedlock ANSI mortice release c/w short and long faceplates - low/med traffic applications
15mm
12v DC
Selectable
1000
Latch
d
AH113
Deedlock rim release for inward opening timber doors - low/med traffic applications
15mm
12v DC
Selectable
1000
-
ANSI Electric Releases - RCI & Adams Rite
13
RCI ANSI Mortice Electric Releases
A range of RCI ANSI mortice electric releases designed for use with
mortice nightlatches and which have the following features:
• Suitable for medium/high traffic applications
• Fail locked and fail unlocked selectable
• Dual Voltage operation 12 - 24v AC * & 12 or 24v DC
• Dynamic force tested to 3000 lbs
• Two versions: Low profile 27mm or Standard profile 30mm deep
• Dual monitoring of Latch and Solenoid version available (LMKM)
• Five different size stainless steel finish faceplates available
* Fail unlocked mode can only be used with DC voltage
RCI ANSI Mortice Electric Releases
Max. latch
throw *
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
RCI Universal low profile ANSI release c/w short faceplate - med/high traffic applications
16mm
12/24v AC/DC
selectable
3000
none
Product ref:
Description
AL6504
AL6504LMKM
RCI Universal low profile ANSI release c/w short faceplate - med/high traffic applications
16mm
12/24v AC/DC
selectable
3000
dual
AL6504/L
RCI Universal low profile ANSI release c/w long faceplate - med/high traffic applications
16mm
12/24v AC/DC
selectable
3000
none
AL6504LMKM/L
RCI Universal low profile ANSI release c/w long faceplate - med/high traffic applications
16mm
12/24v AC/DC
selectable
3000
dual
AS6504
RCI Universal stnd. profile ANSI release c/w short faceplate - med/high traffic applications
19mm
12/24v AC/DC
selectable
3000
none
AS6504LMKM
RCI Universal stnd. profile ANSI release c/w short faceplate - med/high traffic applications
19mm
12/24v AC/DC
selectable
3000
dual
AS6504/L
RCI Universal stnd. profile ANSI release c/w long faceplate - med/high traffic applications
19mm
12/24v AC/DC
selectable
3000
none
AS6504LMKM/L
RCI Universal stnd. profile ANSI release c/w long faceplate - med/high traffic applications
19mm
12/24v AC/DC
selectable
3000
dual
Adams Rite - ANSI Mortice
A range of Adams Rite ANSI Mortice electric releases designed for use
with mortice nightlatches and which have the following features:
• Suitable for high traffic applications
• 12v AC or 12v DC operation
a
• Three different models available
b
• Monitored versions available to special order
c
• SAA or Satin Chrome (SCP) faceplate
Adams Rite
Adams Rite ANSI Mortice Electric Releases
Product ref:
c
a
b
Description
Max. latch
throw *
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
12v DC
locked
2000
none
AAR7100-310628
ANSI mortice release c/w short flat SAA faceplate - high traffic applications
15mm
AAR7100-315628
15mm
12v DC
unlocked
2000
none
AAR7100-340628
15mm
12v DC
locked
2000
none
AAR7101-310628
ANSI mortice release c/w short radius SAA faceplate - high traffic applications
15mm
12v DC
locked
2000
none
AAR7101-315628
ANSI mortice release c/w short radius SAA faceplate - high traffic applications
15mm
12v DC
unlocked
2000
none
AAR7113-310652
ANSI mortice release c/w long flat SCP faceplate - high traffic applications
15mm
12v DC
locked
2000
none
AAR7113-315652
ANSI mortice release c/w long flat SCP faceplate - high traffic applications
15mm
12v DC
unlocked
2000
none
AAR91-0171-05
Subcover extension lip 23mm to suit 100mm frame
-
-
-
-
-
Mortice Electric Releases - Dorcas
14
b
Dorcas Releases - Mortice
A range of Dorcas mortice electric releases designed for use with
mortice nightlatches and which have the following features:
f
a
• Suits mortice mounted nightlatches with 12mm max. throw
f
• Versions with adjustable jaw
• 12v or 24v versions
• Monitored release options
• Stainless steel or brass
d
e
Dorcas
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
Mortice stnd. release - low traffic - Brass faceplate
12v AC
Locked
880
-
Mortice stnd. release - low traffic - Stainless steel faceplate
12v AC
Locked
880
-
ADCN412G
12v DC
Locked
880
-
ADCN512B
Mortice stnd. release - low traffic - Brass faceplate
12v DC
Unlocked
880
-
ADCN512G
12v DC
Unlocked
880
-
ADCNSX - FLEX
Mortice stnd. release with adjustable jaw - low traffic - St. Steel
12v AC
Locked
880
Latch
ADCN412SX - FLEX
Product ref:
Description
e
ADCNB
a
ADCNG
d
b
f
12v DC
Locked
880
Latch
ADCN512SX - FLEX
12v DC
Unlocked
880
-
ADCN305 - 412G
Mortice stnd. release - low traffic - monitored - St. Steel
12v DC
Locked
880
-
ADCN305 - 512G
Mortice stnd. release - low traffic - monitored - St. Steel
12v DC
Unlocked
880
-
ADCN424G
Mortice stnd release - low traffic - St. Steel
24v DC
Locked
880
-
ADCN524G
Mortice stnd. release - low traffic - St. Steel
24v DC
Unlocked
880
-
ADCN412GE - LH
Sashlock release (Wood) - low traffic - St. Steel - DIN left hand
12v DC
Locked
880
-
ADCN412GE - RH
Sashlock release (Wood) - low traffic - St. Steel - DIN right hand
12v DC
Locked
880
-
ADCN45N - 412 - LH
Sashlock release (uPVC) - low traffic - St. Steel - DIN left hand
12v DC
Locked
880
-
ADCN45N - 412 - RH
Sashlock release (uPVC) - low traffic - St. Steel - DIN right hand
12v DC
Locked
880
-
Mortice Electric Releases - Dorcas
15
a
Mortice Releases - High Holding Force
b
A range of Dorcas mortice electric releases with high holding force
which have the following additional features:
• Suitable for medium traffic applications
• Suitable for mortice nightlatches with 12mm max. throw
c
• Operating voltage 12v AC or 12 - 24v DC
• Stainless steel finish
• Adjustable jaw and monitoring options
• Fire rated version available
Dorcas
a
b
c
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
Mortice release - medium traffic - St. Steel f/plate
12v AC
Locked
1790
-
ADCN50N/PX - FLEX
Mortice release with adjustable jaw - medium traffic - St. Steel f/plate
12v AC
Locked
1790
-
ADCN50A/PX
12v AC
Locked
1790
-
ADCN50N412/PX
12-24v DC
Locked
1790
-
ADCN50N412/PX - FLEX
12-24v DC
Locked
1790
-
ADCN50N512/PX
12-24v DC
Unlocked
1790
-
ADCN50N512/PX - FLEX
12-24v DC
Unlocked
1790
-
ADCN50N305-412/PX
Mortice release - monitored - medium traffic - St. Steel f/plate
12-24v DC
Locked
1790
Latch
ADCN50N305-512/PX
Mortice release - monitored - medium traffic - St. Steel f/plate
12-24v DC
Unlocked
1790
Latch
ADCN52/412
Mortice release - 2 hour fire rated - medium traffic - St. Steel f/plate
12-24v DC
Locked
1790
-
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
12v AC
Locked
880
-
Product ref:
Description
ADCN50N/PX
Mortice Releases - Weatherproof
A range of Dorcas mortice electric releases which are suitable for
external applications and which have the following features:
• Suitable for use with mortice sashlocks
• Weatherproof to IP65 rating
• Available 12v AC or DC and 24v DC operation
• Zinc plated faceplate
Product ref:
Description
ADCN62ND/L62 - LH
Weatherproof mortice release - Left Hand
ADCN62ND/L62 - RH
Weatherproof mortice release - Right Hand
12v AC
Locked
880
-
b
ADCN62ND412/L62 - LH
12v DC
Locked
880
-
a
ADCN62ND412/L62 - RH
12v DC
Locked
880
-
ADCN62ND424/L62 - LH
24v DC
Locked
880
-
ADCN62ND424/L62 - RH
24v DC
Locked
880
-
Electric Releases - Dorcas & Clarke
16
Dorcas Releases - Rim
A range of Dorcas rim electric releases which have the following
features:
• Rim releases suitable for rim nightlatches
b
• Suits latches with 12mm maximum throw
• Operating voltage 12v AC or DC
a
• Finish grey powder coated or brass
c
• Range of surface rim cases also available
Dorcas
Dorcas Releases - Rim
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Rim standard release - low traffic applications - Grey
12v AC
Locked
880
ADCN203 - 412G
12v DC
Locked
880
ADCN203 - 412B
Rim standard release - low traffic applications - Brass
12v DC
Locked
880
12v DC
Unlocked
880
Product ref:
Description
c
ACDN203G
c
a
c
ADCN203 - 512G
b
ADCN203+S
Rim standard c/w mortice plate - low traffic - Grey
12v AC/DC
Locked
880
b
ADCN203 - 412+S
12v DC
Locked
880
b
ADCN203 - 512+S
12v DC
Unlocked
880
a
b
Clarke Releases - Mortice
A range of high security mortice electric releases with high jaw
strengths and which have the following features:
• Model 9133 is suitable for mortice nightlatches and is fail unlocked but can be changed to fail locked
• Model 9573 is suitable for mortice deadlocks and supplied fail unlocked only
• Operating voltage 12v DC
CLARKE
Clarke Releases - Mortice
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength
Mortice electrike release for nightlatches
12v DC
Unlocked
7kN
Mortice electric release for deadlock with 18mm bolt throw
12v DC
Unlocked
7kN
Product ref:
Description
a
ACK9133
b
ACK9573
Mortice Electric Releases - Trimec
17
Trimec Releases - Mortice
A range of ANSI Mortice and High Security mortice electric releases
which have the following features:
c
• All models are selectable for Fail Locked or Fail Unlocked operation
• Suits latches with up to 19mm maximum throw (110 Series)
• High security with jaw strengths up to 2200 lbs
• Versions must be specified for timber or metal doors
a
• Operating voltage 12v or 24v DC
• Monitoring option of latch and solenoid position
• Finish Stainless Steel / Black
• Wide range of accessories available
d
b
TRIMEC
Trimec Releases - ANSI Mortice - 110 Series Weather Resistant - Up to 19mm latch bolt
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Current
ANSI weather resistant mortice release - short St.steel faceplate
12v DC
Unlocked
1496
243mA
FTS112AWR
12v DC
Locked
1496
243mA
FTS111BWR
ANSI weather resistant mortice release - long St.steel faceplate
12v DC
Unlocked
1496
243mA
FTS112BWR
12v DC
Locked
1496
243mA
FTS113AWR
24v DC
Unlocked
1496
187mA
FTS113BWR
24v DC
Unlocked
1496
187mA
Product ref:
Description
d
FTS111AWR
d
b
Trimec Releases - High Security Mortice - 2000 Series - Up to 15mm latch bolt
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
High Security release - metal doors
12v DC
Unlocked
1870
-
12v DC
Locked
1870
-
FTS2001
12v DC
Unlocked
1870
Latch & Solenoid
FTS2002
12v DC
Locked
1870
Latch & Solenoid
FTS2100
12-24v DC
Unlocked
2200
Latch & Solenoid
Product ref:
Description
c
FTS201
c
FTS202
a
a
Rim Releases
A range of rim releases which
have the following features:
Trimec Releases - Rim (inward opening)
• All models are selectable for Fail Locked or Fail Unlocked operation
Product ref:
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Current
• Suits latches with up to 12mm maximum throw
FTS151WR
12v DC
Unlocked
1496
243mA
FTS152WR
12v DC
Locked
1496
243mA
• High security with jaw strengths up to 1496 lbs
• Suitable for timber doors
• Operating voltage 12v or 24v DC
• Finish Stainless Steel / Black
TRIMEC
Electric Releases - Alpro
18
Alpro Releases - Mortice
A range of mortice electric releases manufactured by Alpro. Available
as ANSI mortice type in 2 versions and high security mortice designed
for use with mortice nightlatches and with the following features:
• Suitable for medium to high traffic applications
• Easy change from fail locked to fail unlocked
• Suits latches with up to 13mm throw
b
c
• Holding force up to 3,860 lbs
• AL111, AL112 & AL2001 Weather resistant to IP56
a
• CE - BS EN50081-1 and BS EN50082-1 approved
Alpro Releases - Mortice
c
b
a
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
Current
12/24v
ANSI mortice release - short & long faceplate*
12v DC
Unlocked
3000
-
300mA @ 12v
AEL901M
12v DC
Unlocked
3000
Latch
300mA @ 12v
AEL902
12v DC
Locked
3000
-
300mA @ 12v
AEL902M
12v DC
Locked
3000
Latch
300mA @ 12v
AEL903
24v DC
Unlocked
3000
-
150mA @ 24v
AEL903M
24v DC
Unlocked
3000
Latch
150mA @ 24v
AEL904
24v DC
Locked
3000
-
150mA @ 24v
AEL904M
24v DC
Locked
3000
Latch
150mA @ 24v
AL111AS
ANSI mortice release - short faceplate
12/24v DC
Unlocked
3860
-
200 / 100mA
AL111BS
ANSI mortice release - long faceplate
12/24v DC
Unlocked
3860
-
200 / 100mA
AL112AS
ANSI mortice release - short faceplate
12/24v DC
Locked
3860
-
200 / 100mA
AL112BS
ANSI mortice release - long faceplate
12/24v DC
Locked
3860
-
200 / 100mA
AL2001
High Security mortice release - long faceplate
12/24v DC
Unlocked
3000
Latch & Solenoid
220 / 110mA
ALEX1125
Extension lip 25mm for AL111 or AL112
-
-
-
-
-
ALEX1150
Extension lip 50mm for AL111 or AL112
-
-
-
-
-
FRM1
Rectifier sounder module for AC to DC conversion
12/24v DC
-
-
-
Max. 1A
Product ref:
Description
AEL901
* AEL900 Series includes 25mm extension lip
Alpro Releases - Rim
Rim electric release manufactured by Alpro. Designed for use with
rim nightlatches fitted to inward opening timber doors and with the
following features:
• Easy change from fail locked to fail unlocked
• Suits latches with up to 13mm throw
• Holding force up to 1,680 lbs
• Weather resistant to IP56
• Black finish
• CE - BS EN50081-1 and BS EN50082-1 approved
Alpro Releases - Rim
Product ref:
Description
Operating
Voltage
Fail Locked/
Unlocked
Jaw
strength (lbs)
Monitoring
Current
12/24v
AL151
Rim electric release for inward opening door
12/24v DC
Unlocked
1680
-
200 / 100mA
19
Access Control Systems
Access Control systems provide controlled entry through doors, gates or barriers.
This is achieved using Electronic Code, Plastic Card or Plastic Fob to activate an electronic locking device.
Tate Colson supplies several systems ranging from a simple coded access Keypad up to sophisticated
computer controlled card or fob entry systems capable of controlling multiple doors across several sites.
We are able to offer systems manufactured by the following companies:
Paxton
Access Control Systems - Stand Alone Keypads
20
For full product specifications on Deedlock systems please contact our sales office.
Stand Alone Keypads
Our stand alone keypads provide basic access control for low risk
entrances or internal doors. All the electronics are built into the keypad
housing. Keypads have buttons on the front usually numbered 0-9
with a * and # key similar to a pushbutton telephone pad. The keypad
controls a relay which operates an electronic lock or can be used to
trigger an automatic door operator. Authorised users are given a code
which they enter into the keypad which then operates the electronic
lock.
All our keypads have the following features:
• Provide basic access control by Code
• Different length codes between 2 and 8 digits
• Built-in timer for output relay
• Input for exit button
• Internal or external versions available
• Single and multiple code versions available
Deedlock Stand Alone Keypads
APX-11 Features
A series of Keypads suitable for Medium use applications. The APX11
and APX12 are suitable for Internal door applications (APX12 can be
used for Sheltered External situations). The APX15 keypad is suitable
for Internal or External situations and comes in a Bright Chrome finish
with black insert.
• Plastic housing and buttons
Ideal for Residential Flats, Office or Light Commercial use
• Up to 10 Four digit user codes
• Suitable for internal applications
• Backlit buttons as standard
• Programmed using master code
• Single volt-free relay (Pulse/Toggle)
• Dimensions 128(h) x 70(w) x 36mm(d)
APX-12 Features
12
PX
• Metal housing and buttons
A
• Suitable for internal applications
11
PX
A
• Up to 20 Four or Five digit user codes
• Two volt-free relay (Pulse/Toggle)
AP
X15
APX-15 Features
• Metal housing and buttons
• Easy installation
• Operating voltage 12v AC or DC
• Up to 50 Two to Eight digit user codes
• 12v DC 2A lock output
Product ref:
Description
Voltage
Current
Relay rating
Relay time
(sec)
APX-11
Internal plastic keypad
12v DC
70mA
30v DC 2A
0-99
APX-12
Internal metal keypad
12v DC
100mA
2 x 30v DC 2A
APX-15
Robust metal keypad
12v AC/DC
80mA
12v DC 2A
No. of Codes
Backlit
Buttons
IP
rating
10
yes
n/a
Door contact & exit button inputs, tamper
0-99
20+1
yes
n/a
Door contact & exit button input
0-99
50
no
n/a
Exit button input
Other features
Access Control Systems - Stand Alone Keypads
21
For full product specifications on ACT & Siemens systems please contact our sales office.
ACT Keypads
AC
AC
T5
T1
0
A series of keypads suitable for medium use applications on internal or
external doors. Ideal for office and commercial use, or for education,
health and residential situations. The ACT5 offers simple access control
and the additional features of the ACT10 make it suitable for more
sophisticated control applications.
ACT5 Features
ACT10 Features
• Polycarbonate housing and stainless steel buttons
• Zinc die cast housing and stainless steel buttons
• Backlit buttons (programmable on/off/auto)
• Up to 10 Four digit user codes (2 user/groups)
• Up to 10 Four digit user codes
• Operating voltage 12 - 24v AC/DC
• Two volt-free relays (Pulse/Toggle)
• Surface or flush mount options
• Door monitoring/contact input
• Single volt-free relay (Pulse/Toggle)
• Duress, interlock and fire alarm override features
• Potted electronics
• Door forced or ajar alarm outputs
Current
Relay rating
Relay time
(sec)
120mA
30v DC 5A
0-255
120mA
2 x 30v DC 5A
0-255
No. of Codes
Backlit
Buttons
IP
rating
10
yes
IP67
10
yes
IP54
Product ref:
Description
ACT5
Int./Ext. polycarbonate keypad 12-24v AC/DC
ACT10
Int./Ext. metal keypad
ACT10FK
Stainless steel flush mount kit for ACT10 - for fitting ACT flush into the wall
ACT1010W
Stainless steel weather shield for ACT10 - allows the ACT10 to be sheltered from rain in exposed external applications
Voltage
12-24v AC/DC
Other features
Exit button input, incorrect code
lockout
Siemens (Bewator) Keypads
AB
W
-K
42
Two keypads suitable for medium use on internal or sheltered external
doors. Ideal for office and commercial use or for education, health and
residential applications.
The ABW-K42 provides basic access control when the code is not
changed regularly.
The ABW-K44Duo has additional features for more sophisticated
access control applications.
ABW-K42 Features
ABW-K44DUO Features
• Cast metal housing and stainless steel buttons
• Cast metal housing and stainless steel buttons
• Codes set by internal jumpers and pins
• Operating voltage 12-24v DC or 18-24v AC
• Operating voltage 12-24v DC or 18-24v AC
• 1 or 2 four digit user codes
• 20 four digit and 10 six digit user codes
• Single volt-free relay (Pulse)
• Two volt-free relays (Pulse)
• Code disable feature (by switch or timer)
• Group code disable feature
• Housing protected by security key
• Housing protected by security key
• Duress and tamper alarm outputs
Product ref:
Description
ABW-K42
ABW-K44DUO
Relay rating
Relay time
(sec)
12-24v DC/18-24v AC 35mA
30v DC 2A
1-30
12-24v DC/18-24v AC 35mA
2 x 30v DC 2A
1-99
Voltage
Current
No. of Codes
Backlit
Buttons
IP
rating
Other features
2
yes
IP55
Exit button input
30
yes
IP55
Exit button input
Systems - Stand Alone Card & Proximity Systems
22
For full product specifications on Deedlock systems please contact our sales office.
Card Entry Systems
Stand alone card entry system provide higher security than Keypads
as each person is given a card or fob to gain entry through the door.
There are 2 types of system, 'Self Contained' with the electronics built
into the reader, and 'Separate Controller' where the electronics are in
a separate unit inside the building.
Self Contained units are ideal for low risk areas on internal doors in
offices, store rooms etc.
There are 2 main types of 'Card' format:
Magnetic Swipe uses a card similar to a Bank or credit card and
requires the user to swipe the card through a slot on the reader.
Proximity systems use a card or a small Fob and require the user to
hold the card/fob in front of the reader. The majority of our systems use
Proximity technology as there is no wear and tear on the system.
Separate Controller units are ideal for higher risk areas on external
or internal doors for apartment entrances, office entrance, computer
rooms or other commercial applications.
Deedlock Card Entry
A range of Self Contained and Separate Controller proximity entry
systems suitable for medium duty use on internal or external doors.
Ideally suited for office, residential, education or health applications with
less than 1000 users.
AC3100 Features
• Self Contained Proximity system for internal or external use (IP54)
• Programmed using Master card
• Up to 30 Fobs/Cards maximum
• Read range up to 50mm
• Volt-free relay (Pulse/Toggle)
• Master card and 5 fobs included
AKT4200 Series Features
APX03 Features
• Separate Controller Proximity system for internal or external use (IP54)
• Self contained system for internal use only
• Programmed using Master card
• Programmed using Master fob
• Up to 999 Fobs/Cards maximum
• Up to 12,000 Fobs maximum
• Options for Card/Fob & Code
• Volt-free relay (Pulse)
• 10 fobs included (see below)
• Volt-free relay (Pulse)
• Operating voltage (see below)
• 5 fobs included
• Available with 12v DC Power supply
• Dims -Reader 75(h) x 39(w) x 15mm(d); Controller 200 x 235 x 80mm
• Dimensions of reader 123(h) x 81(w) x 21mm(d)
Product ref:
Description
Voltage
Current
Relay time
Relay rating
(sec)
No. of Max. read
users
range
IP
rating
AC3100
Prox. reader c/w master card c/w 5 fobs
12v DC
120mA
24v DC 5A
0 or 3
30
Other features
50mm
IP54
Exit button input
AKT4200
Prox. controller & reader, c/w 12v DC PSU
240v AC
1A
24v DC 5A
1-9
AKT4221
Prox. controller & reader c/w 10 fobs
12v AC/DC
60mA
24v DC 5A
1-9
999
50mm
IP54*
Exit button input
999
50mm
IP54*
Exit button input
AKT4222
Prox. controller & 2 readers c/w 10 fobs
12v AC/DC
110mA
24v DC 5A
AKT4223
Controller/reader/PSU/electric release + 10 fobs
240v AC
1A
24v DC 5A
1-9
999
50mm
IP54*
Exit button input
1-9
999
50mm
IP54*
Exit button input
APX-03
Internal keypad/prox. reader + 5 fobs
12v DC
270mA
24v DC 1A
1 - 255
12000
110mm
N/A
Bell + exit button input
* Reader rating only. Controller must be fitted internally
Cards & Fobs for Deedlock Systems
Product ref:
Description
AC7100
Deedlock ISO Proximity card, white for AC3100 and AKT4200 Series
70mm
AC7101
Deedlock Proximity Fob, Black for AC3100 and AKT4200 Series
70mm
APX-03F
Deedlock Proximity Fob, Black (pack of 10) for use with APX03
110mm
Max. Read Range
Systems - Stand Alone & Networked Systems
23
For full product specifications on ACT systems please contact our sales office.
ACT5Prox Stand Alone Keypad & Proximity
Combined keypad with proximity reader suitable for medium use
applications on internal or external doors. Ideal for office and
commercial use, or for education, health and residential situations.
More secure than a keypad as each person is given a card or fob to
gain entry. Can be programmed to operate for Card or Code, Card +
Individual Code or Card + Common Code.
• Polycarbonate housing and stainless steel buttons
• Backlit buttons (programmable on/off/auto)
• Up to 50 Cards/Fobs & 50 four digit user codes
• Single volt-free relay (Pulse/toggle)
• Easy deletion of user Card/Fob
• Surface or flush mounted options
• Potted electronics
Product ref:
Description
ACT5Prox
ACT internal /external polycarb 12-24v DC
Voltage
Current
Relay rating
Relay time
(sec)
100mA
30v DC 5A
0-255
No. of users
50
Read
range
IP
rating
80mm
IP67
keypad & prox. reader
ACT/SMISO-B
ACT ISO Proximity batch card, white (pack of 10) - suitable for card printing
100mm
ACT/SMFOB-B
ACT Proximity batch fob, blue (pack of 10)
80mm
Other features
Exit button input, Incorrect code lockout
Colson Wireless RS485 Connection Kit
The Tate Colson AZ-485 is a secure wireless replacement for RS-485
network cables in access control systems, specifically designed to
provide a low cost, plug-and-play alternative to traditional cabling
between difficult to reach control units.
RS485 Connection Kits
There are 4 different kits available to suit a range of access control
systems. Each kit includes 2 Wireless RS485 Modules and 2 SAM
cards to suit the relevant access control system in use. One AZ485
module is wired into a door controller on the main RS485 Bus in the
network. The other AZ485 is wired into one of the door controllers to
be connected via the wireless link. Each AZ485 module will need a
9-24v DC 100mA supply from the door controller.
A maximum of 3 kits can be used on one site.
Features of the wireless connection kit include:
• Replaces RS485 network cable between door controllers
• Suitable for internal and external installations (IP65 enclosure)
• Range up to 250 metres in clear line of sight and 2m above ground
• Unique SAM cards prevent interference from other AZ-485 units
• Multi channel operation - 3 different channels can be used
• Four LED indicators provide operation feedback
Voltage
Current
Wireless RS485 connection kit c/w ACT SAM cards
9-24v DC
100mA
250m
3
ACT - ACTPro 100 & 2000
AZ-485/B
Wireless RS485 connection kit c/w BSB PROGENY SAM cards
9-24v DC
100mA
250m
3
BSB Progeny - P3
AZ-485/C
Wireless RS485 connection kit c/w PAC SAM cards
9-24v DC
100mA
250m
3
PAC - PAC512
AZ-485/D
Wireless RS485 connection kit c/w PAXTON SAM cards
9-24v DC
100mA
250m
3
Paxton Net2
Product ref:
Description
AZ-485/A
No. of
Max. range Channels
Door controller manufacturer & type
Systems - Networked Systems
24
For full product specifications on ACT systems please contact our sales office.
10
10
80
90
ACT Smart2 Range
Smart2 Systems for 1 to 8 Doors
The ACT Smart2 range consists of Keypads and Card Readers which
are designed to be low cost effective and highly flexible Access Control
systems for Small to Medium sized Commercial buildings and can be
operated as Stand Alone or Networked for up to 8 doors..
Features of the ACT Smart2 Range include:
• Proximity reader, Reader/Keypad or Keypad only
• Can be used stand alone, master/slave or networked to a PC for up to 8 doors
10
70
• Up to 1,000 users (500 if Card & PIN)
• Programmable inputs and outputs
• Tamper output
• Volt-free relay (Pulse/Toggle)
• 16 user groups and 1,000 log events (with Networked PC)
Voltage
Current
Relay rating
Relay time
(sec)
Int./Ext. polycarbonate proximity reader
12-24v AC/DC
100mA
30v DC 5A
ACT2SMART 1080
Int./Ext. polycarbonate keypad & proximity reader
12-24v AC/DC
100mA
ACT2SMART 1090
Int./Ext. polycarbonate keypad & controller
12-24v AC/DC
ACT2SMARTCTR
Networked controller c/w software Serial lead & manual
12v DC
Product ref:
Description
ACT2SMART 1070
No. of users
Read
Range
IP
rating
0-255
1,000
80mm
IP67
30v DC 5A
0-255
1,000
80mm
IP67
100mA
30v DC 5A
0-255
1,000*
80mm
IP67
200mA
-
-
-
-
-
* 500 users for Card & PIN
ACT Pro Systems
The Pro Range consists of Door Controllers, Proximity Readers and
Keypad which provides a highly flexible, scalable access control system
designed to facilitate the most demanding requirements for any size
enterprise.
10
50
10
30
ACT Pro Systems for 1 to 2000 Doors
Features of the ACT Pro Range include:
AC
T1
00
0
• One or two door controllers which can either be networked together or networked with a PC
• Up to 16 doors networked or 2,000 doors on a PC
• Range of ACTPRO-X readers and keypads which will read ACT or HID cards or fobs
• 10,000 to 30,000 users (depending on controller used)
• PC connection via RS232 or RS485 and TCP/IP support
• Programmable inputs and outputs
Product ref:
Description
Voltage
Current
Relay rating
No. of users
Event
Log
ACT1000
1 Door controller with keypad & LCD display
12v DC
150mA
30v DC 5A
10,000
500
ACT2000
2 Door controller with keypad & LCD display
12v DC
230mA
30v DC 5A
20,000
2,000
ACT3000
2 Door controller with keypad & LCD display c/w built-in TCP/IP connection
12v DC
230mA
30v DC 5A
30,000
2,000
Product ref:
Description
Voltage
Current
Read Range
ACTPRO1030
Int/Ext. slimline polycarbonate proximity reader
5/12v DC
40mA
80mm
IP67
ACTPRO1030PM
Int/Ext. panel mount proximity reader
5/12v DC
40mA
80mm
IP67
ACTPRO1040
Int/Ext. polycarbonate proximity reader
5/12v DC
40mA
80mm
IP67
ACTPRO1050
Int/Ext. polycarbonate keypad/proximity reader
5/12v DC
40mA
80mm
IP67
IP Rating
Access Control Systems - BSB Progeny
25
For full product specifications on BSB systems please contact our sales office.
BSB Progeny Access Control Systems
The BSB Progeny range consists of magnetic swipe card readers, proximity readers and 1 or 2
door controllers for basic stand-alone systems up to complex multi door systems.
There are 3 systems available within the BSB Progeny range:
a
c
b
P1 Stand-Alone
P2 Networked (1-16 Doors)
P3 Networked (1-65,000 Doors)
A range of stand alone 1 & 2 door controllers
which provide access control with magnetic
swipe or proximity readers:
A range of on-line 1 & 2 door controllers which
provide PC based access control for 1-16 doors,
used with Progeny P2 proximity readers:
A range of on-line 1 & 2 door controllers which
provide PC based access control for up to
65,000 doors with mag. swipe or prox. readers:
• One or two door controllers
• One door controller only and One or Two door controller c/w 12/24v PSU
• One or Two door controllers
• Networked to PC to control up to 16 doors
• Networked to a PC to control up to 65,000 doors
• Integral 12/24v DC 2 Amp power supply
• Up to 10,000 cards/fobs
• Integral 12/24v DC 2 Amp power supply
• Site coded BSB format HID cards
• P2 controller linked to PC via USB interface or P2.net linked to LAN/WAN via TCP/IP
• Alarm output: door forced, PDO
• P3 controller linked to PC via USB interface or P3.net linked to LAN/WAN via UDP/IP
• Lock output relay 12 or 24v DC
• BSB Progeny cards or fobs only
• Magnetic swipe or proximity readers
• 32 access levels and time zones
• Site coded BSB format HID cards
• Programmed via on-board keypad
• Magnetic swipe or proximity readers
BSB - Controllers
Current
Relay rating
No. of users
1.5 A
30v DC 2A
10,000
230v AC
1.5 A
30v DC 2A
10,000
n/a
12v DC
30mA
30v DC 3A
2,000
2,000
P2.Net - 1 door controller c/w TCP/IP boxed (no PSU)
12v DC
30mA
30v DC 3A
2,000
2,000
FB3821
P2 - 1 door controller c/w 12/24v DC PSU 2A
230v AC
1.5 A
30v DC 3A
2,000
2,000
FB3821D
P2 - 2 door controller c/w 12/24v DC PSU 2A
230v AC
1.5 A
30v DC 3A
2,000
2,000
FB3001
P3 - 1 door controller with on-board keypad & 12/24v DC PSU
230v AC
1.5 A
30v DC 2A
10,000
2,000
FB3001D
230v AC
1.5 A
30v DC 2A
10,000
2,000
FB3002
P3 - 1 door controller c/w UDP/IP, keypad & 12/24v DC PSU
230v AC
1.5 A
30v DC 2A
10,000
2,000
FB3002D
P3 - 2 door controller c/w UDP/IP, keypad & 12/24v DC PSU
230v AC
1.5 A
30v DC 2A
10,000
2,000
Voltage
Product ref:
Description
Voltage
FB2163
230v AC
FB2163D
FB3801
P2 - 1 door controller boxed (no PSU)
FB3802
Event
Log
n/a
BSB - Readers
Product ref:
Description
System
Suitability
a
FB2052
HID Pointprox internal/external proximity reader
P1 and P3
c
FB2053
HID Vandal resistant proximity reader
FB2058
HID Progeny internal/external proximity reader
FB3800
Progeny P2 Switch plate internal/external proximity reader - flush fitting
FB3820
FB3830
b
Current
Read Range
8-16v DC
75mA
80mm
P1 and P3
8-16v DC
75mA
80mm
P1 and P3
8-16v DC
75mA
80mm
P2 only
12v DC
90mA
30-50mm
Progeny P2 Mullion internal/external proximity reader - flush fitting
P2 only
12v DC
90mA
30-50mm
Progeny P2 Panel Mount proximity reader - for door entry panel
P2 only
12v DC
90mA
30-50mm
Access Control Systems - PAC
26
For full product specifications on PAC systems please contact our sales office.
PAC Proximity Systems
The PAC range consists of the KeyPac Solo Stand Alone self contained readers and Easikey
250 Stand Alone Controllers which are used with the Oneprox range of Proximity readers.
The full range of PAC controllers, readers and accessories are also available to special order.
a
c
e
f
b
d
KeyPac Solo Stand-alone Kits
Pac Easikey 250
Pac OneProx Readers
Stand alone reader with built in controller.
Available as a standard or vandal resistant
version. The system has the following features:
Stand alone two door controller available in 3
versions for use with Pac Oneprox range of
readers. The system has the following features:
A range of proximity readers for use with Pac
Easikey, Pac 500 Series and iPac Controllers.
Compatible with Pac, KeyPac and Stanley cards/
fobs. The readers have the following features:
• Reader & controller combined
• Two door controller with LCD display for programming and viewing last 5 users
• Available in 6 different styles
• Up to 2,000 fobs
• Operating voltage 12v AC/DC
• Read range from 35 to 230mm
• Easy to install and programme using Master cards and Shadow cards
• Available boxed c/w 12v DC PSU
• Up to 250 users
• Designer, panel mount and vandal resistant readers are DDA compliant
• 5 year warranty on reader
• Programmed using Master card/fob
• Built in Oneprox reader
• Supplied with Master cards, 10 fobs & 10 shadow cards
• 5 year warranty on reader
• Panel mount and Vandal readers available in 2 colours
• Designer range supplied c/w four interchangeable colour covers
KeyPac - Kits
Product ref:
Description
Voltage
Current
Relay rating
No. of users
Read
Range
a
APA21326
KeyPac Solo standard prox. reader c/w 2 x Master cards & 10 x fobs/shadow cards
12v DC
120mA
b
APA21585
KeyPac Solo vandal resistant prox. reader c/w 2 x Master cards & 10 x fobs/shadow cards
12v DC
120mA
30v DC 2A
2,000
150mm
30v DC 2A
2,000
APA20019
KeyPac Solo pack of 10 fobs and shadow cards
40mm
n/a
n/a
n/a
n/a
n/a
Voltage
Current
Relay rating
Pac Controllers and OneProx Readers
c
f
e
d
No. of users
Read
Range
Product ref:
Description
APA22370
Easikey 250 Two door controller only (requires boxed PSU)
12v AC/DC
190mA
24v DC 2A
250
n/a
APA22275
Easikey 250 Two door controller c/w 12v 3A metal box PSU (no cut out)
230v AC
3A
24v DC 2A
250
n/a
APA22277
Easikey 250 Two door controller c/w 12v 3A metal box PSU (with cut out)
230v AC
3A
24v DC 2A
250
n/a
APA20073
OneProx mullion proximity reader - grey
12v DC
90mA
n/a
n/a
60mm
APA20478
OneProx standard proximity reader - grey
12v DC
90mA
n/a
n/a
230mm
APA20067
OneProx Designer mullion proximity reader
12v DC
90mA
n/a
n/a
90mm
APA20068
OneProx Designer standard proximity reader
12v DC
90mA
n/a
n/a
180mm
APA20042
OneProx DDA Panel mount proximity reader - yellow & black
12v DC
90mA
n/a
n/a
35mm
APA20049
OneProx DDA Panel mount proximity reader - blue & grey
12v DC
90mA
n/a
n/a
35mm
APA20424
OneProx DDA Vandal resistant proximity reader - yellow & black
12v DC
90mA
n/a
n/a
60mm
APA20483
OneProx DDA Vandal resistant proximity reader - blue & grey
12v DC
90mA
n/a
n/a
60mm
Access Control Systems - Paxton
27
For full product specifications on Paxton systems please contact our sales office.
Paxton Access Control
35
35
3-2
10
33
1-
21
0
The Paxton range consists of a range of keypads, card readers and
control units from the basic stand alone systems up to sophisticated
computer controlled networked systems for multiple doors.
32
6-7
Paxton Compact
33
321
0
A range of stand alone keypads and proximity readers with built in
controllers. Keypads and Proximity readers are available in a range of
sizes in plastic or stainless steel.
• Suitable for internal or external applications
10
• Completely self-contained with built in controllers
37
2-2
• Programmed using master code (keypads) or via enrolment card (proximity readers)
351
-21
0
• Keypads offer 1 - 50 user codes of 4 to 8 digits
• Proximity readers suitable for up to 10,000 users
• Pre-wired with 3 metres of cable
Compact Keypads
Product ref:
Description
Voltage
Current
Relay rating
Relay time
(sec)
APX331-210
K38 Compact plastic keypad
12v DC
300mA
12v DC 1A
1-60
APX351-210
12v DC
300mA
12v DC 1A
APX371-210
12v DC
300mA
APX332-210
K38 Compact st. steel keypad
12v DC
300mA
APX352-210
12v DC
APX372-210
12v DC
No. of users
IP
rating
Other features
1-50
IP67
Exit button input, wrong code lockout
1-60
1-50
IP67
12v DC 1A
1-60
1-50
IP67
12v DC 1A
1-60
1-50
IP67
300mA
12v DC 1A
1-60
1-50
IP67
300mA
12v DC 1A
1-60
1-50
IP67
No. of users
Read
range
IP
rating
Other features
Compact Proximity Readers
Product ref:
Description
Voltage
Current
Relay rating
Relay time
(sec)
APX333-210
P38 Compact prox. reader
12v DC
300mA
12v DC 1A
1-60
10,000
60mm
IP67
Exit button input
APX353-210
12v DC
300mA
12v DC 1A
1-60
10,000
80mm
IP67
Exit button input
APX373-210
12v DC
300mA
12v DC 1A
1-60
10,000
100mm
IP67
Exit button input
APX326-735
Vandal proof prox. reader
12v DC
160mA
12v DC 1A
1-60
10,000
80mm
IP67
Exit button input
Paxton Switch2 Single Door Controller
405
-32
1
24
2-
16
6
Switch2 is a single door controller unit suitable for use with Switch2
or Net2 keypads and card readers shown on the following page. The
controller is available as a PCB for fixing into a boxed PSU or in a
plastic housing c/w 12v DC 1A power supply.
• Stand alone controller for single doors
• 1 - 50 user codes of 4 to 8 digits & up to 10,000 cards/fobs
• Volt free relay output rated 4A at 24v DC
• Up to 2 keypads or readers can be connected to the controller
• Input for door contact and exit button
Contact our sales office for details on proximity card and fob packs
Switch2 Controllers
Product ref:
Description
APX405-321
Switch2 single door controller PCB only (requires 12v DC boxed PSU)
APX242-166
Switch2 single door controller c/w 12v DC 1A PSU in plastic box
Current
Relay rating
12v DC
80mA
24v DC 4A
10,000
230v AC
1A
24v DC 4A
10,000
Voltage
No. of users
Access Control Systems - Paxton
28
For full product specifications on Paxton systems please contact our sales office.
A range of single door controllers for use with keypads and readers
shown below. Each controller is networked and controlled by a PC.
68
2-
49
3
48
933
4
Paxton Net2 Access Control Units
65
494
3
• 3 types of controller are available - Classic, Plus & Nano
• Distributed intelligence
• Event buffering
• Diagnostic LEDs
• Can be used with 3rd Party readers
• Accepts Clock & Data or Wiegand
• Net2 Plus has built in TCP/IP RJ45
• Net2 Nano wireless controller for easy installation & communication
• Net2 I/O board available to control other devices (eg lights/lifts etc)
Net2 Controllers
Product ref:
Description
Voltage
Current
Relay rating
No. of users
Event
Log
APX489-334
Net2 Classic - 1 door control unit, PCB only
12v DC
350mA
APX385-527
Net2 Classic - 1 door control unit c/w plastic housing
12v DC
350mA
24v DC 4A
10,000
2,454
24v DC 4A
10,000
2,454
APX411-381*
Net2 Classic - 1 door control unit & 12v DC 2A PSU (metal)
230v AC
APX682-493
Net2 Plus - 1 door control unit, PCB only
12v DC
2A
24v DC 4A
10,000
2,454
200mA
24v DC 4A
50,000
2,454
APX682-813*
Net2 Plus - 1 door control unit & 12v DC 2A PSU (metal)
230v AC
APX654-943
Net2 Nano - 1 door control unit, PCB only
12v DC
2A
24v DC 4A
50,000
2,454
120mA
24v DC 4A
10,000
3,584
APX654-549
Net2 Nano - 1 door control unit c/w plastic housing
12v DC
APX654-772
Net2 Nano - 1 door control unit & 12v DC 2A PSU (plastic)
230v AC
120mA
24v DC 4A
10,000
3,584
2A
24v DC 4A
10,000
3,584
* Also available in plastic cabinet - contact our sales office for details
Additional items for Net2 System
A range of keypads and card readers
for use with either the Switch2 or
Net2 controllers. Shown are the most
popular types.
71
5
35
1-
11
0
35
3-
39
11
0
0-
74
7
Switch2 & Net2
Keypads/Readers
37
211
0
52
1-
• 17 different card readers available
• Plastic, stainless steel and vandal resistant keypads available
• Keypads and readers suitable for internal or external use
• Keypads pre-wired with 5m cable
Please contact us for details on the full range of Paxton readers
• Hands-free interface available for P-Series readers
Keypads & Readers
Product ref:
Description
Voltage
Current
Read
Range
APX351-110
K50 Touchlock plastic keypad 50mm wide c/w black & white cover
12v DC
120mA
n/a
APX371-110
K75 Touchlock plastic keypad 75mm wide c/w black & white cover
12v DC
120mA
n/a
APX352-110
K50 Touchlock stainless steel keypad 50mm wide
12v DC
100mA
n/a
APX372-110
K75 Touchlock stainless steel keypad 75mm wide
12v DC
100mA
n/a
APX521-715
Vandal resistant metal keypad 89mm wide
12v DC
150mA
n/a
APX353-110
P50 Proximity reader 50mm wide c/w black & white covers
12v DC
120mA
80mm
APX373-110
12v DC
120mA
100mm
APX323-110
12v DC
120mA
200mm
APX390-135
Panel mount prox. reader 58 x 58mm to fit most VR door entry panels
12v DC
110mA
50mm
APX390-747
Metal proximity reader 76mm wide, silver & black finish
12v DC
110mA
50mm
APX355-110
KP50 Keypad & proximity reader 50mm wide c/w black & white cover
12v DC
180mA
80mm
APX455-482
USB/RS485 converter kit & housing
APX514-326
Desktop proximity reader
APX930-001
Standard software CD
APX930-010
Professional software CD
APX477-222
Hands free interface for P Series readers
with Net2 or Switch2
APX477-268
Air USB Bridge for Net2 Nano
controllers
APX477-384
Air Ethernet Bridge for Net2 Nano
controllers
APX489-710
I/O board PCB only
APX385-710
I/O board c/w plastic housing
APX692-448
ISO Proximity card pack of 10
APX695-644
Proximity key fob pack of 10
APX690-222
Hands free key fob (individual)
APX690-333
Hands free key card (individual)
Contact our sales office for details of the
full range of additional items available.
Accessories - Exit Buttons & Switches
29
Exit Buttons & Switches
a
b
e
c
g
d
h
f
i
Product ref:
Description
a
AEB1NR
White plastic exit button c/w surface box - "PRESS TO EXIT"
b
AEB2
Flush stainless steel exit button - "PRESS TO EXIT" (n/o contact)
c
AEB3
Narrow flush stainless steel exit button - "PRESS TO EXIT" (n/o contact)
d
AEB4
Narrow flush aluminium illuminated Exit Button - 12/24v DC
e
AEB5
Flush aluminium illuminated Exit Button - 12/24v DC
f
AEB6
Flush stainless steel heavy duty green Exit Button - "PRESS TO EXIT"
g
AEB7
Flush heavy duty Exit Button on green plate - "PRESS TO EXIT"
h
AEB8
Narrow white plastic Exit Button c/w surface box - "PRESS TO EXIT"
AEB9
Touch sensitive Exit Button c/w surface box - "TOUCH TO EXIT" - 12v DC
AEB17
White plastic green dome c/w surface box - "PRESS TO EXIT" AEB17/DR
White plastic green dome c/w surface box - "DOOR RELEASE"
AEB18
Narrow wh. plastic green dome Exit But. c/w sur. box - "PRESS TO EXIT"
AEB18/DR
Narrow wh. plastic green dome Exit But. c/w sur. box - "DOOR RELEASE"
AEB20
Narrow flush stainless steel exit button 85 x 38mm
AEB21
Flush stainless steel exit button 85 x 85mm
l
AEB22
Plastic Exit Button with stainless steel button c/w surface box 85 x 85mm
m
AEB23
Stainless steel Exit Button with green switch 85 x 85mm
n
AEB24
Flush stainless steel Exit Button 85 x 85mm
o
AEB25
Narrow st. steel exit button c/w green surf. box - "PRESS TO EXIT" IP66
AEB25/DR
Narrow st. steel exit button c/w green surf. box - "DOOR RELEASE" IP66
AEB26
St. steel exit button c/w green surface box - "PRESS TO EXIT" IP66
AEB26/DR
St. steel exit button c/w green surface box - "DOOR RELEASE" IP66
AEB27
Narrow st.steel green dome c/w green surf. box - "PRESS TO EXIT" IP66
AEB27/DR
Narrow st.steel green dome c/w green surf. box - "DOOR RELEASE" IP66
AEB28
St. steel 3.35" round switch c/w green surf. box - "PRESS TO EXIT" IP55
AEB28/DR
St. steel 3.35" round switch c/w green surf. box - "DOOR RELEASE" IP55
AEB28/W
St. steel 3.35" round switch c/w white surf. box - "PRESS TO EXIT" IP55
AEB28/DRW
St. steel 3.35" round switch c/w white surf. box - "DOOR RELEASE" IP55
AEB29
St. steel green dome c/w green surface box - "PRESS TO EXIT" IP66
s
AEB29/DR
St. steel green dome c/w green surface box - "DOOR RELEASE" IP66
t
AEB-BOX
Stainless steel surface housing - (for AEB2, AEB5, AEB6 & AEB-KS)
AEB-BOX-GN
Green surface housing - (for AEB7)
AEBBOX/NR
Narrow st. steel surface box - (for AEB20)
d
i
k
j
j
k
m
l
p
t
n
q
q
p
r
o
r
s
b
Push Switches for Disabled Applications (DDA)
Product ref:
Description
a
AEB10
Narrow st.steel switch "Push to Open" & wheelchair icon c/w surf. box
b
AEB11
4" round st. steel all active switch - wheelchair icon c/w surf. box
AEB12
4" round st. steel all active switch "Push to Open" c/w surf. box
AEB14
4" rnd st/st all active switch "Push to Open" - wh.chair icon c/w surf. box
AEB15
Flush st. steel 4.5" round switch "Push to Open" - wh.chair icon (IP67)
AEB15BB
Stainless steel surface box for AEB15
AEB16
Stainless steel 3.35" round switch "EXIT" (IP67) c/w green surface box
d
FDTP001*
Touch sensitive switch "Touch to Exit" - 12/24v DC 2A @ 30v DC rated
e
FDTP002*
Touch sensitive switch "Touch to Enter" - 12/24v DC 2A @ 30v DC rated
FDTB001
Surface back box for FDTP001 & FDTP002
c
* Require a permanent 12/24v DC input to operate
a
d
c
e
Accessories - Exit Buttons & Switches
30
Break Glass Call Points
a
Product ref:
Description
a
F200/G/EDR
Tate green break glass call point - single pole c/w surface box
c
ABGU1-DP
Tate green resettable call point - double pole c/w surface box
ABGU3-TP
Tate green resettable break glass point - triple pole c/w surface box
ABGU/COVER
Tate transparent cover for F200 & BGU Series call points
FMX0001
Tate Call point test key (pack of 10) for above calll points
ACP200
Tate green resettable call point - single pole c/w surface box
ACP201
Tate green resettable call point - double pole c/w surface box
ACP202
Tate green resettable call point - triple pole c/w surface box
ACP203
Tate green break glass call point - single pole c/w surface box
ACP204
Tate replacement glass panel (pack of 10) for ACP201/202/203
AKA-MCP3A-SG
KAC green break glass call point - single pole c/w surface box
AKA-MCP3A-GF
KAC green resettable call point - single pole c/w surf. box
b
d
e
e
b
d
AKA-MCP3A-WSG KAC white break glass call point - single pole c/w surface box
AKA-MCP4A-SG
KAC green break glass call point - double pole c/w surface box
AKA-MCP4A-GF
KAC green resettable call point - double pole c/w surface box
c
AKA-MCP4A-WSG KAC MCP white break glass point - double pole c/w surface box
AKA-WCP3AG-SG KAC green weatherproof break glass call point - single pole c/w surf. box
f
AKA-WCP4A-SG
KAC green weatherproof break glass call point - dble pole c/w surf. box
AKA-KG1
KAC replacement glass for KAC break glass call points
AKA-SC070
KAC test key for KAC MCP call points (pack of 10)
AKA-PS200
KAC transparent hinged cover for KAC MCP call points
AKA-PS210
KAC resettable flexible element for KAC MCP call points
f
AEB800 Microswitched Push Bar
For use with Electric locking or access
control systems.
900mm bar can be cut down on site
to 635mm minimum.
SAA finish as standard
Dual switching for lock activation and
monitoring
Key Switches
b
c
a
Product ref:
Description
a
AEBKS
Colson flush stainless steel. Maintained switch c/w 2 keys (key
removeable in both positions)
b
FATE660-1
Tate flush stainless steel. Momentary switch c/w 2 keys
c
FATE668
Tate flush stainless steel. Euro profile cylinder momentary switch - requires
FATE402 single cylinder to be ordered separately
FATE669
Tate flush stainless steel. Euro profile cylinder maintained switch - requires
FATE402 single cylinder to be ordered separately
SEU402
Single Euro profile cylinder for FATE668 & FATE669 key switches
AEB BOX
Surface box for AEBKS, FATE660, 668 & 669 key switches
Deedlock Accessories
31
Wireless Exit Button & Receiver
Wireless flush stainless steel exit button which is linked to a receiver
unit connected to a 12v DC supply. Suitable for use with 12v DC
electronic locks or access control systems.
• Robust flush stainless steel button
• Receiver connects to 12v DC power source
• Volt free relay rated 2amps @ 12v DC
• LED indicator to show status
• Low voltage battery warning for exit button
• Adjustable time delay 3, 5 or 10 seconds
Product ref:
Description
AEB2WR
Flush stainless steel wireless exit button and receiver unit*
AEB2HS
Wireless remote transmitter fob for AEB2WR receiver
AEBBOX
Stainless steel surface housing for AEB2WR exit button
AEB2WR
* Note: The wireless exit button must be fitted with the antenna wire outside the switch
box to work correctly
Door Loops
b
a
Product ref:
Description
c
ALP101
Concealed door loop for timber doors & frames - chrome finish
a
ALP103
Budget surface door loop - silver with white plastic brackets
b
ALP135
Surface armoured door loop - silver
c
Relays
Deedlock relay unit 12/24v AC/DC, double pole (8A @ 240v AC)
F1044591
Tate universal timer module 12v AC/DC (1 sec to 1 hour)
F159/12
Tate relay unit 12v AC/DC, single pole (5A @ 12v DC)
F159
Tale boxed relay 24v DC (7A @ 240v AC), supplied in single gang box
91
APB226
T
12
53
O
AH
45
Hoyles timed relay unit (1 - 30 sec), double pole (2A @ 30v DC)
04
Description
AHOS312T
F1
Product ref:
26
B2
AP
Deedlock Accessories - Power Supplies & Backup
Boxed DC Power Supplies (with battery charger circuit)
A range of boxed linear and switch node 12v and 24v DC power
supplies manufactured by Elmdene and RGL
Product ref:
Description
AED-1381N
Elmdene Linear 12v DC, 1A. Mains, battery & fault LEDs
AED-1381NS
Elmdene Linear 12v DC, 1A. Mains LED only
AED-1383N
AED-1385N
AED-1390
Elmdene Linear 12v DC, 2A. Deep discharge protection
AED-1382
Elmdene Linear 12v DC, 2A. BABT approved. Deep discharge protection
AED-1384
AED-13801N-A
Elmdene switch mode 12v DC, 1A Mains, battery & fault LEDs
AED-13802N-A
AED-13803N-A
AED-13803N-B
AED-13804N-C
AED-13805N-C
AED-2401
AED-2402
FB42
RGL Linear 12v DC, 1A (Max.). Mains LED only
FB42/2A
RGL Linear 12v DC, 2A. Mains & fault LEDs
FB43
RGL Linear 12v DC, 3A. Mains & fault LEDs FB45
RGL Linear 12v DC, 5A. Mains & fault LEDs FB42/SM
RGL Switch mode 12v DC, 1A. F161-A
F162-A
F160A
F165A
AE
D-
AE
13
D-
81
13
80
N
1N
-A
FB
43
Battery Backup
Product ref:
Description
FB5/1
Rechargeable battery - 12v DC 1.2Ah
FB5/2
FB5/3
FB5/7
F140
Rechargeable battery - 12v DC 3.0Ah (set of 2 for 24v DC System)
F141
F142
F144
FB
5/7
F1
61
-TR
Boxed Transformer Rectifiers (no battery backup facility)
Product ref:
Description
F161-TR
RGL Transformer rectifier 24v DC, 1A. Mains & fault LEDs
F162-TR
F164-TR
32
Electric Release Lock Compatibility
33
This is a 'quick reference' guide which matches electric releases to suitable lockcases from the Securefast range.
Release Code:
Description
Lock Cases
AAR7113-310652
Adams Rite ANSI Mortice, Long F/plate
ADEF
ADCN412G
Dorcas Std Mortice, Wood F/Plate Grey
AF
AAR7113-315652
Adams Rite ANSI Mortice, Long F/plate
ADEF
ADCN512G
AF
AAR7100-310628
Adams Rite ANSI Mortice, Short Flat F/plate
HIJK
ADCNG
AF
AAR7100-315628
HIJK
ADCN305-412SX
Dorcas Std Mortice, Wood F/Plate St.St.
AF
AAR7100-340628
HIJK
ADCN305-512SX
AF
AAR7101-310628
Adams Rite ANSI Mortice, Short Rad. F/plate
HIJK
ADCN412SX
AF
AAR7101-315628
Adams Rite ANSI Mortice, Short Radius F/plate
ADEFHIJK
ADCN424SX
AF
AEL901
Alpro ANSI Mortice c/w Long&Short F/plate
ADEFHIJK
ADCN512SX
AF
AEL901M
ADEFHIJK
ADCN524SX
AF
AEL902
ADEFHIJK
ADCNSX
AF
AEL902M
ADEFHIJK
ADCN412SX-FLEX
Dorcas Std Mortice, Adj.Jaw, Wood F/Plate St.St. AF
AEL903
ADEFHIJK
ADCN512SX-FLEX
AEL904
ADEFHIJK
ADCNSX-FLEX
AEL904M
ADEFHIJK
AL6504/L
RCI Low Profile ANSI Mortice, Long FacePlate
ABCDEFG
AEL903M
ADEFHIJK
AL6504LMKM/L
RCI Low Profile ANSI Mortice, Long FacePlate
ABCDEFG
AL111BS
Alpro ANSI Mortice, Long F/plate
ADEFHIJK
AL6504
RCI Low Profile ANSI Mortice, Short FacePlate
HIJK
AL112BS
Alpro ANSI Mortice, Long F/plate
ADEFHIJK
AL6504LMKM
RCI Low Profile ANSI Mortice, Short FacePlate
HIJK
AL111AS
Alpro ANSI Mortice, Short F/plate
ADEFHIJK
AS6504/L
RCI Std Profile ANSI Mortice, Long FacePlate
ABCDEFG
AL112AS
Alpro ANSI Mortice, Short F/plate
ADEFHIJK
AS6504LMKM/L
RCI Std Profile ANSI Mortice, Long FacePlate
ABCDEFG
AL2001
Alpro High Security Mortice
ABCDEFGHIJK
AS6504
RCI Std Profile ANSI Mortice, Short FacePlate
HIJK
AL151
Alpro Rim for Inward Open Wood Door
L
AS6504LMKM
RCI Std Profile ANSI Mortice, Short FacePlate
HIJK
ACK9573
Clarke Mortice Deadbolt, Brass F/Plate
For Deadlock only
FTS111BS
Trimec ANSI Mortice, Long FacePlate
ABCDEFG
ACK9133
Clarke Std Mortice, Wood Nickel F/Plate
ADEF
FTS112BS
ABCDEFG
AER971
Deedlock American Style Mortice, Wood door
ADEF
FTS113BS
ABCDEFG
AER972
Deedlock American Style Mortice, Wood door
ADEF
FTS111AS
Trimec ANSI Mortice, Short FacePlate
HIJK
AH111
Deedlock ANSI Mortice, Long&Short F/plate
ADEFGHIJK
FTS112AS
HIJK
AH111M
ADEFGHIJK
FTS113AS
HIJK
AST125-FLT
ADEFGHIJK
FTS2001
Trimec High Security Mortice
ABCDEFGHIJK
AST125-FUT
ADEFGHIJK
FTS2002
ABCDEFGHIJK
AH113
Deedlock Rim for Inward Open Wood door
L
FTS201
ABCDEFGHIJK
ADCN203+S
Dorcas Rim c/w Mortice F/plate Grey
FL
FTS202
ABCDEFGHIJK
ADCN203-412+S
FL
FTS151
Trimec Rim for Inward Open Wood Door
L
ADCN203-512+S
FL
FTS152
L
ADCN203-412G
Dorcas Rim for Inward Open Wood, Grey
L
FTS153
L
ADCN203-512G
L
FTS154
L
ADCN203G
L
A
B
C
D
E
F
G
H
I
J
K
L
SEU511/12
SEU513/14
Euro profile
UK size
nightlatch
SEU777
SEU1094
SM1233
SA353
SLA520
Euro profile
72mm ccs
nightlatch
Euro profile
72mm ccs
nightlatch
SBL310/15
SBL320
Digital lock
with tubular
latch
A5245101/
2/3/4
Alpro round
cylinder
nightlatch
A5245701/
2/3/4
Alpro Euro
profile cyl.
nightlatch
AAR4710/
1/2/3/400
Adams Rite
round cyl.
nightlatch
AAR4750/
2/300
Adams Rite
profile cyl.
nightlatch
SLB750/1/2
/3/4/5/6/7
Securefast
rim nightlatch
Scandinavian Euro profile
style
Scandinavian
nightlatch
nightlatch
Heavy duty
tubular latch
Terminology
34
This is a 'quick reference' guide to the most common terms used in electronic locking and access control.
AC (Alternating Current) - Term which refers to the voltage from a
transformer or mains supply.
L Bracket - Bracket used to fix an electromagnetic lock on door frames with
a shallow frame depth on outward opening doors.
Amp - Measurement for the flow rate of electrical current for an electrical
device (smaller amounts below 1 amp are quoted in milliamps (mA).
Magnetic Swipe - A type of card and reader technology similar to Bank or
Credit cards. Card has a black magnetic strip which holds the card details.
ANSI - American National Standards Institute. Ensures mortice electric
release dimensions for faceplate and side lip are the same for every version.
Maintained - Term used for switches – means the switch will remain in either
the On or Off position when operated.
Anti Tamper screw - Screw which has a non-standard head (Hex or Torx
drive head).
Master Card/Fob - Card or fob which is used to put a card reader into the
programming mode.
Armature Plate - Metal plate supplied with an electromagnetic lock and
bolted to the door or bracket. Must be flexible when fixed to the door.
Master Code - Code number which is used to put a keypad or controller into
the programming mode.
Back EMF - Electrical surge which is produced from the coil of an electric
release or electromagnetic lock. Can cause an access control system to
crash.
Momentary - Term used for switches – means the switch will change from
On to Off only while the switch is pressed/turned.
Backlit Buttons - Buttons on a keypad have lighting behind them which
makes them more visible in dark areas
Monitored - Shows the status of an electric locking device by signalling to
an access control system or indication panel that the device is locked or
unlocked.
Battery Backup - Rechargeable battery which fits into a DC Power Supply
(PSU) to provide power for a limited period in a power Failure.
Mortice Mount - Refers to an electric lock which is fitted flush into a door
frame.
Break Glass / Call Point - Means of emergency release for a Fail-Safe
locking device. Has a switch inside which is operated when glass panel is
broken when pushed.
Networked - Group of access controllers which are linked together so that
data can be shared between each controller and the PC
Code Lockout - Feature on some keypads which shuts down the keypad if
too many incorrect codes are entered.
Current Draw - Amount of electrical current which is required to operate an
electronic locking device or system. Usually measured in Amps or Milliamps.
Diode - Small electronic component used to protect an electronic device
from Back EMF surges. Allows current to flow in one direction.
DC (Direct Current) - Term which refers to the voltage from a power supply
unit (PSU).
DDA - Disability Discrimination Act
Door Forced - Access control feature which generates an alarm output if a
door is opened without entering a valid code/card or pressing an exit button.
Door Loop - Flexible metal tube used to transfer cable securely from the
frame of a door to the door leaf of a pair of doors with an electric release
fitted.
Double Pole - Term used for switches or break glass call points. Means that
the switch has 2 isolated sets of contacts (see also Single Pole).
Dual Voltage - Can be set to work on 2 different voltages (i.e.: 12 or 24)
Duress - Feature available on some keypads which allows an alarm output to
be generated if a person is forced to open a door with their user code.
Event Log - Record of Card or Fob transactions and events held at an
access door controller (number of records held varies for different models).
Exit Button - Electrical spring switch which is used to momentarily control
the electrical current to an electric locking device. Can be used with other
devices.
Face to Face - Refers to the locking position of the armature plate against
the face of an electromagnetic lock when fixing to a door.
Fail Locked / Fail Secure - Means an electric locking device will remain
locked in a power failure.
Fail Unlocked / Fail Safe - Means an electric locking device will be unlocked
in a power failure.
Fob - Plastic proxmity device which works exactly the same as a proxmity
card but is more robust and can be attached to a key ring or chain.
Hall Effect Monitoring - Relay circuit which indicates correct alignment of
the Armature plate on an electromagnetic lock.
Holding Force - Amount of pressure which can be applied to an electric
locking device before it will release/unlock. Usually shown in pounds (lbs).
Interlock - Access control feature which allows at least 2 doors to be
controlled by preventing 1 door from unlocking while the other door is open.
Jaw Strength - Amount of side pressure which can be applied to an electric
release's jaw before it will release/unlock. Usually shown in pounds (lbs).
Key Switch - Key operated switch used to override an electric locking
device.
PSU (Power Supply) - Unit which is connected to a mains fused spur.
Reduces 240v AC to 12v or 24v AC and then converts current to DC.
Proximity Card - Electronic card which is used with proximity readers. The
card details are programmed onto a microchip attached to a coil of copper
wire which acts as an aerial to pick up the radio signal from the proximity
reader.
Proximity Reader - Access control reader which transmits a radio signal that
reads the card or fob information when it is held in front of the reader.
Read Range - Distance that a card or fob can be held in front of a proximity
reader before it can be recognised.
Relay - Electronic device which is used to switch voltage to an electric
locking device. Can also be built into the circuit of an access control device.
Relay Rating - Maximum voltage, current and load in amps that can be
switched through the relay contacts.
Relay Time - This is the number of seconds the relay will operate for. Zero
seconds will toggle the relay On/Off.
Rim Mount - Refers to an electric release which is fitted to the face of the
door frame.
Self Contained - Term used for access control keypad or card reader which
means the unit has all the electronic controls built-in.
Single Pole - Term used for switches or break glass call points. The switch
has a single set of isolated contacts (see Double Pole).
Solenoid - Electronic device which is fitted inside an electric release or bolt
which controls the movement of the locking mechanism.
Stand Alone - Terms used for access control which means the unit works
independently from other units in a building.
Transformer - Unit which is connected to a mains fused spur. Reduces 240v
AC current to 12v or 24v AC.
Test Key - Plastic key used to test the operation of a break glass or call
point.
User Code - Code number which a person enters into a keypad to gain
entry.
Voltage - Measurement of the energy available to drive the flow of electrical
current.
Volt-Free Relay - Relay has not output voltage as standard (this requires the
installer to fit a link wire from either Positive or Negative of power input).
Z&L Bracket - Set of 3 brackets used to fix an electromagnetic lock to the
door & frame on an inward opening door.
Our complete portfolio of product brochures can
be obtained through our sales offices or can be
downloaded from our website
www.tatecolson.co.uk
Tate Colson
1st Floor, Queen Anne House, 18 Eastbank Street, Southport, PR8 1DT
Tel: (01704) 502801 Fax: (01704) 502810 Technical Support (01704) 502815
www.tatecolson.co.uk
Email: [email protected]
Securefast
Unit 6, The Cedars Business Park, Avon Road, Cannock, Staffordshire WS11 1QJ
Tel: (01543) 501600 Fax: (01543) 501601
www.securefast.co.uk
Email: [email protected]

Electronic Locking & Accessories

Transcription

Similar documents

XMP-TMC3500 Flyer

EmeryLED 3.5w/BA15s

LED AUTOLAMPS STRIP LAMP STOP / TAIL 12V 380 Series RED

Large 2 digit BCD input 1/8 DIN display - Model BCD-2

PDF

Full Datasheet - 17D Miniatures

Aquanautic 8/12/20A / Pro Sport 5_5/5

GasGuard Manual Interlocking System

How to make the d8b PSU/CPU fanless