JB70970A Titan ASE Griffin Brochure

HL300
THERMO MARK II
FEATURES • Adjustable dual front brakes
• Single lever bead width adjustment with “OFF” position
• Precision side mounted thermostat with dual indicator (no toggle switch or battery needed)
• Stainless steel, brass and copper LPG supply lines and valves
• Conveniently located operator controls
• Internal divider screen
• Noise-free operation
• No exposed wiring
• Precision wheel bearings
• Ability to leave open beader box door during application for quick access
• Low capital investment
• • Rear swivel wheel for 360 degree application
• • Bolt together assembly
• Reservoir surrounded by 1” mineral wool insulation
• Thermoplastic handliner
• User Friendly Feature
• Cost saving Feature
• Exclusive Feature
DOUBLEDROP
BEAD SYSTEM
UPGRADE AVAILABLE
THERMO MARK II HL300
SPECIFICATIONS:
MATERIAL CAPACITY
300 lbs / 136 kg
APPLICATION DIE WIDTH:
Min. 4", Max. 12" Standard.,
Custom width and dual line dies available
HEATING TYPE
LP gas (20 lb bottle required)
DIE HEATER
Infrared
EMPTY WEIGHT
350 lbs / 158 kg
MAIN BURNER
Twin Ransome / 20000 BTU
GAS CONTROL
Honeywell
BRAKES
Adjustable dual front brakes w/hand controlled lever
BEAD DISPENSER
Wheel driven beader with application rate
proportioned to ground speed
DISP. WIDTH ADJUSTABLE
4", 6", 8", 12" and off position
MANUAL FRONT POINTER
Adjusts for all die sizes
WHEELS
Dual solid front and single solid rear wheels provide smooth operation
MATERIAL AGITATION
Manual / horizontal shaft / reverse pitch / flow paddles
SHIPPING WEIGHT
(Crated) 500 lbs / 205 kg
REAR WHEEL (SWIVEL)
Precision engineered with quick release lever
CONSTRUCTION
Aluminum with bolt-together assembly
TURNING RADIUS
360°
BEAD CAPACITY RESERVOIR
Minimum 50 lbs
DIMENSIONS:
52"L x 43.25"W x 37"H
UNIVERSAL
ATTACHMENT
KEEP THE HANDLINER FILLED
FASTMELT 650
THE LATEST INNOVATIVE FEATURE FROM TITAN ASE
The FM650 is a complete self-contained
thermoplastic, propane fueled melting kettle
on a skid. Its small footprint (48" wide by
42" depth and 51" tall) and empty weight of
only 950 lbs make it one of the smallest and
fastest melting kettles to date.
It can be placed in the back of a standard
pickup, flat bed or on a trailer. It has the
ability to continually melt and hold 650 lbs.
of thermoplastic material at proper temp for
your handliner needs.
JB70970A
Titan ASE
8905 Gurley Road
Douglasville, GA 30134
1-866-273-4357
www.AdvancedStripingEquipment.com
MADE IN
THE USA