FEATURES - Titantool
Transcription
FEATURES - Titantool
HL250 FEATURES • Adjustable dual front brakes • Single lever bead width adjustment with “OFF” position • Precision side mounted thermostat with dual indicator (no toggle switch or battery needed) • Stainless steel, brass and copper LPG supply lines and valves • Conveniently located operator controls • Internal divider screen • Noise free operation • No exposed wiring • Precision wheel bearings • Ability to leave open beader box door during application for quick access • Low capital investment UNIVERSAL ATTACHMENT • Independent dual-bead reservoirs • Application rate synchronized with specs of unit • Double Drop bead application system • • Rear swivel wheel for 360 degree application • • Bolt together assembly • Reservoir surrounded by 1” mineral wool insulation • Thermoplastic handliner • User Friendly and Cost Saving Feature • Exclusive Feature • Double Drop Feature LEFT-HANDED THERMO MARK DOUBLEDROP BEAD SYSTEM UPGRADE AVAILABLE THERMO MARK HL250 SPECIFICATIONS: HL250 SINGLE DROP HL250 DOUBLE DROP MATERIAL CAPACITY 250 lbs / 114 kg 250 lbs / 114 kg APPLICATION DIE WIDTH Min. 4", Max.12" Standard., Custom width and dual line dies available Min. 4”, Max.12” Standard., Custom width and dual line dies available HEATING TYPE LP gas (20 lb bottle required) LP gas (20 lb bottle required) DIE HEATER Infrared Infrared EMPTY WEIGHT 255 lbs / 120 kg 315 lbs / 143 kg MAIN BURNER Twin Ransome / 20000 BTU Twin Ransome / 20000 BTU GAS CONTROL Honeywell Honeywell BRAKES Adjustable dual front brakes w/hand controlled lever Adjustable dual front brakes w/hand controlled lever BEAD DISPENSER Wheel driven beader with application rate proportioned to ground speed Wheel driven beader with application rate proportioned to ground speed DISP. WIDTH ADJUSTABLE 4", 6", 8", 12" and off position 4", 6", 8", 12" and off position MANUAL FRONT POINTER Adjusts for all die sizes Adjusts for all die sizes DUAL SOLID FRONT AND SINGLE SOLID REAR WHEELS Provides smooth operation Provides smooth operation MATERIAL AGITATION Manual / horizontal shaft / reverse pitch / flow paddles Manual / horizontal shaft / reverse pitch / flow paddles SHIPPING WEIGHT (Crated) 450 lbs / 205 kg (Crated) 500 lbs / 227 kg REAR WHEEL (SWIVEL) Precision engineered with quick release lever Precision engineered with quick release lever CONSTRUCTION Aluminum with bolt-together assembly Aluminum with bolt-together assembly TURNING RADIUS 360° 360° BEAD CAPACITY RESERVOIR Minimum 50 lbs Minimum 50 lbs DIMENSIONS: 52"L x 43.25"W x 37"H 57"L x 43.25"W x 37"H UNIVERSAL ATTACHMENT FOR SULKY OR LINE DRIVER UNITS KEEP THE HANDLINER FILLED FASTMELT 650 THE LATEST INNOVATIVE FEATURE FROM TITAN ASE The FM650 is a complete self-contained thermoplastic, propane fueled melting kettle on a skid. Its small footprint (48" wide by 42" depth and 51" tall) and empty weight of only 950 lbs make it one of the smallest and fastest melting kettles to date. It can be placed in the back of a standard pickup, flat bed or on a trailer. It has the ability to continually melt and hold 650 lbs. of thermoplastic material at proper temperature for your handliner needs. JB70969A Titan Advanced Striping Equipment 8905 Gurley Road Douglasville, GA 30134 1-866-273-4357 www.AdvancedStripingEquipment.com MADE IN THE USA
Similar documents
Titan™ ASE Thermo Mark HL300
• Precision side mounted thermostat with dual indicator (no toggle switch or battery needed) • Stainless steel, brass and copper LPG supply lines and valves • Conveniently located operator controls...
More information