Ferris 2014 Brochure
Transcription
Ferris 2014 Brochure
2014 Z E R O - T U R N S | F R O N T - M O W E R S | W A L K - B E H I N D S The Ferris® brand was born with a built-to-last commitment which continues today along with a history of impressive innovations. From the industry’s first ever hydrostatic drive walk-behind lawn mower to the industry’s first and only patented suspension system for the riding lawn mower, Ferris continues to innovate. This dedication is what separates us from other manufacturers and it will separate you from your competition too. We pride ourselves on building reliable commercial mowers that time and time again will be more productive and ensure the highest quality of cut. Beyond manufacturing mowers that will provide years of service, we continually look for ways to improve not only our products, but our customer’s satisfaction. We know that choosing the right piece of equipment is essential and that’s why we go beyond making the most of every minute in the field. Our knowledgeable distributors are prepared to assist you with exceptional service. We are confident that they will help you select the Ferris mower that fits you best. From our products to our people — you can rely on Ferris Commercial Mowers. www.FerrisIndustries.eu | 3 1909 Ferris Industries began as the Uebler Milking Machine Company. 1986 With the emerging landscaping industry, the company shifted its focus to manufacturing commercial lawnmowers. The Ferris brand was born with the same commitment to strong, built-to-last machinery that characterized the company’s established heritage. 1987 Ferris introduced and patented the first hydrostatic drive walk-behind mower. The company was awarded the prestigious Innovation Award from the Outdoor Power Equipment Institute (OPEI) for this breakthrough. 1998 Ferris revolutionized the industry with the introduction of Independent Suspension (I.S.) – the first ever Independent Suspension System for the riding mower. I.S. Independent Suspension earned Ferris the distinguished OEMmie award for innovative engineering solutions. 1999 Ferris became a subsidiary of Simplicity Manufacturing, Inc. Throughout the next year, Simplicity demonstrated its commitment to the company by increasing its workforce, completing a factory expansion, and pouring resources into product development. 2000 Ferris introduced a new family of zero-turn mowers from 48- to 72-inches. The largest model featured 4-wheel I.S. Independent Suspension, thereby confirming Ferris’ position in the industry as Commercial Mower Specialist™. 2002 Ferris achieved a new level of speed and performance with the introduction of the IS® 5000Z. This was the first diesel-powered mower in the Ferris line featuring a Caterpillar industrial-grade diesel engine. The increase in demand for products led the company to break ground once again for expansion. 2004 Simplicity manufacturing, along with its subsidiaries, Ferris, Snapper, and Giant-Vac were purchased by Briggs & Stratton Power Products Group. To handle the continued success additional square footage was added to the Munnsville manufacturing facility. 2005 The IS®1500Z, IS® 4500Z and HydroCut™ 36 were released. The incredible sales demand for these new models boosted production three times during the course of the year. 2006 Ferris updated their entire line of zero-turn mowers with the addition of standard Roll Over Protection Systems. Two new models were also introduced, the IS® 5100Z and the all new IS® 2000Z. Ferris’ continued commitment to reliability and innovation has defined the company as a leader in the commercial market. 2008 Ferris introduced the Rear Discharge mower deck with mulching system fitted as standard. 2009 Ferris introduced the IS® 2500Z diesel zero-turn. The industry witnessed the evolution of mowing with the innovative Ferris Evolution™ mower - a forward thinking compact zero-turn that places the operator in the most ideal ergonomic position for mowing. Briggs & Stratton have proudly opened a Centre of Excellence in Roermond in the Netherlands. This centre was built to service the training needs of their European, Middle East and African distributor network and their dealers for Yard and Power Products. 2012 Ferris introduced the ComfortControlTM DD-FM SeriesTM. This walk-behind flail mower is designed to combat the most demanding environments and is ideal for mowing rough and overgrown areas. INTRODUCTION SUSPENSION TECHNOLOGY ................. 04 ICDTM CUTTING SYSTEM ....................... 06 RIDE-ON MOWERS .......................... 08 IS® 5100Z ............................................ 10 IS® 2500Z ............................................ 12 IS® 600Z .............................................. 14 IS® 700Z .............................................. 14 F800X .................................................. 16 EVOLUTIONTM ....................................... 18 WALK-BEHIND MOWERS ............... 20 COMFORT CONTROLTM DD FW35 .......... 22 COMFORT CONTROLTM DD FM30........... 23 COMFORT CONTROLTM DD .................... 24 HYDROCUTTM........................................ 25 ACCESSORIES .................................. 26 SPECIFICATIONS.............................. 28 SUSPENSION TECHNOLOGY FERRIS IS® INDEPENDENT SUSPENSION SYSTEM UNIQUE PATENTED FEATURE An exclusive feature which sets Ferris completely aside from the competition is their industry patented IS® suspension system featured throughout the Ferris range. Ferris offers a whole range of benefits to the end user just through the suspension system alone, from increased operator comfort to boosting productivity. Ferris really seems to have it covered! GREATER CAPABILITY AND PRODUCTIVITY Many operators are not always aware that they slow down to compensate for rough terrain. So, when protected from these effects using a Ferris IS® suspended ride-on mower, the operator naturally increases speed taking advantage of the full engine horsepower available from the machine. The IS® suspension system itself is designed to absorb the bumps and vibrations that can cause operator fatigue. The increased comfort translates to greater operator satisfaction and increased productivity. TERRAIN FOLLOWING DESIGN FOR A PRECISE CUT The mower deck follows the movement of the IS® independent wheel suspension and the flow of uneven terrain. So for example when going over a bump, the suspension follows the ground contours, minimizing breaks in ground contact and maximizing traction to produce a superior and consistent cut. This suspension also benefits the chassis by significantly reducing shock load. COMMERCIAL MOWER SPECIALIST In an industry where productivity against investment is becoming even more important, the direct link between operator comfort and ground coverage is definitely food for thought when purchasing new equipment. Ferris IS® suspension results in reduced shocks to the chassis, superior operator comfort, increased mowing speeds, better stability and an extended overall mower life. That’s why Ferris is the commercial mower specialist for your business! COMFORT Ferris’ exclusive suspension system absorbs shocks and vibrations that cause operator fatigue. The increased comfort translates to operator satisfaction and increased productivity. IS® Suspension Technology is available on select models. www.FerrisIndustries.eu | 5 SO HOW DOES IT WORK? Our patented suspension system allows each wheel to move up and down independently smoothing out uneven turf. The deck of the mower floats from the suspension and raises and lowers as the wheels of the mower do. This system virtually eliminates shocks to the chassis, resulting in superior operator comfort, increased mowing speeds, stability and extended mower life. iCD™ CUTTING SYSTEM The innovative iCD™ Cutting System allows for better airflow, discharge and superior cut quality. The slope nose of the deck forces the grass forward and allows them a longer period of time to rise in the chamber before the blades make contact. The new iCD™ cutting system offers unparalleled cut quality and complements the innovation of the Ferris line. • Standard on selected models. • The leading edge of the deck is reinforced just where you need it to add strength, not weight. • Marbain steel blades are stronger, harder and require less time sharpening. • Flexible rubber discharge chute simply flexes when it comes in contact with objects. • Purpose built rear discharge mulching decks with removable bolted rear baffle. 3 1 2 8 4 7 5 6 1. F lexible recycled rubber discharge chute reduces contact damage 5. R einforced leading edge which provides protection where the deck needs it most 2. E xtra wide discharge opening evenly disperses grass clippings 6. C entre point is offset, optimizing airflow for discharge 3. D ebris shield on idler pulleys keeps moisture and debris away extending bearing life 4. M ulti-layer heavy gauge steel construction for maximum strength 7. S lope nose design reduces the amount of clippings discharged from the front 8. D eck step allows for easy entry and exit from the operator’s compartment www.FerrisIndustries.eu | 7 Full-width double top deck constructed of steel bent in opposing directions for added strength. 1. P urpose built rear discharge mulching deck. 4 2. M arbain steel blades. 3. E asily removable mulching insert. 4. Dedicated Ferris Mulching blades. 1 2 3 RIDE-ON MOWERS www.FerrisIndustries.eu | 9 ZERO-TURNS Ferris’ exclusive patented suspension system sets Ferris ® completely aside from the competition. The fully independent suspension paired with powerful engine choices achieves new levels of comfort ability, performance and productivity. The suspension system protects the operator from uneven terrain, allowing increasing ground speed and taking full advantage of all available horsepower. With 9 models to choose from, offering diesel and gasoline powered engines, deck widths ranging from 112 cm to 183 cm (44” to 72”), and the option to choose between rear and side discharge you will be sure to find the perfect Ferris ® zero-turn mower to fit your needs. Be surprised by the extremely high capacity and maximum operator comfort. FRONT-MOWER The visibility and versatility of the Ferris ® F800X cannot be beaten. Its out-front design is perfect for reaching under hedgerows and to trim around trees, bushes and landscaped areas with ease. Thanks to the zero-turn steering system the machine is extremely manoeuvrable. The machine is standard equipped with an electric deck lift which also provides a nearly vertical fold position for easy access to the underside of the deck for cleaning and maintenance. EVOLUTIONTM The forward thinking design of the Ferris ® EvolutionTM mower allows the operator to be placed in the most ideal ergonomic position to mow, which is much more comfortable than a stand-on mower. The operators back, shoulders and neck are aligned to minimize discomfort and fatigue. The operators weight is evenly distributed providing comfort throughout the day. Integrated suspension technology heightens the riding experience and delivers outstanding comfort and performance. Especially suitable for the medium-sized gardens that are not accessible with a large machine, but which are too large for an ordinary walk-behind mower. High performance synthetic oil used in select hydraulic systems. IS® 5100Z The IS® 5100Z series of full-sized zero-turn mowers features an impressive complement of comfort, performance and convenience. It features easier service access, more horsepower, improved operator comfort and increased performance, all contributing to lower cost of ownership. Our industry-exclusive suspension is a standard feature. When it comes to commercial lawnmowers, this is truly the ultimate riding and cutting machine. MODEL ENGINE DECK IS5100ZC33D61RDCE 33.5 HP* Caterpillar 3 Cylinder Liquid Cooled Diesel 155 cm - 61” iCDTM Deck Rear discharge with standard mulching insert IS5100ZC33D72RDCE 33.5 HP* Caterpillar 3 Cylinder Liquid Cooled Diesel 183 cm - 72” iCDTM Deck Rear discharge with standard mulching insert IS5100ZC33D72SDCE 33.5 HP* Caterpillar 3 Cylinder Liquid Cooled Diesel 183 cm - 72” iCDTM Deck Side Discharge with optional mulching kit ENGINE GROUP • Caterpillar three cylinder liquid cooled diesel engine delivers more torque at a lower rpm for increased power when needed (79,9 Nm @3000 rpm). • Two-stage industrial air-cleaner. • Rugged twin 28.4 litre fuel tanks (56.8 litres total). • Primary and secondary fuel filters for added long term protection. • Automotive style hood latch for easier service access. OPERATOR CONTROL & COMFORT SYSTEMS • Expanded operator compartment includes ergonomic control panels featuring a cup-holder, cell phone pocket, 12-volt outlet and storage compartment. • Folding Roll Over Protection Structure (ROPS) with retractable seat belt. • Heavy duty integrated rear bumper for engine compartment protection. • Foot operated hydraulic deck lift system. • Standard deluxe high back seat. 19 KM/H GROUND SPEED * POWER RATED BY ENGINE MANUFACTURER. MOWER DECK • Available in 183 cm side or 155 cm / 183 cm rear discharge cutting width with iCDTM Technology. • Cutting height: 3.8 - 15.2 cm / 1,5-6,0 inches adjusts in 0.6 cm increments. • HerculesTM cast-iron mower spindles, top greaseable. SUSPENSION / CHASSIS • Patented four-wheel suspension system dramatically increases quality of cut and operator comfort. • Industry leading 6 mm thick tubular steel frame rails. ACCESSORIES • iCDTM Mulch kit 183 cm side discharge. • Trailer hitch kit. • Suspension seat kit. • Flat free caster tyres. • 360° anti-scalp caster wheel kit. • Dedicated Ferris mulching blades. www.FerrisIndustries.eu | 11 HerculesTM cast-iron mower spindles with oversized 62 mm tapered roller bearings, 31.5 mm shaft and 26 cm 6-bolt flange design. 1500cc, 33.5-hp Caterpillar (model C1.5) diesel engine is the best in its class. 6.000 hours expected engine life, legendary reliability. The iCDTM Cutting System allows better airflow, superior cut quality and complements the innovation of the Ferris line. Ferris uses industry leading 6 mm thick frame. Dual coil-over-shock rear suspension with dual cast iron suspension arms and front independent adjustable coil-over shocks. The foot operated hydraulic deck lift system makes raising and lowering the deck effortless. IS® 2500Z The IS® 2500Z series includes a variety of premium performance, comfort and convenient features that add even greater customer value to an already best-selling design. This mower offers supreme quality and reliability, plus an extraordinary package of features and benefits. One lap on this machine and you will know… Ferris has done it again. MODEL ENGINE DECK IS2500ZY24D52SDCE 24 HP* Yanmar 3 Cylinder Liquid Cooled Diesel 132 cm - 52” iCDTM Deck Side discharge with optional mulching kit IS2500ZY24D52RDCE 24 HP* Yanmar 3 Cylinder Liquid Cooled Diesel 132 cm - 52” iCDTM Deck Rear discharge with standard mulching insert IS2500ZY24D61SDCE 24 HP* Yanmar 3 Cylinder Liquid Cooled Diesel 155 cm - 61” iCDTM Deck Side discharge with optional mulching kit IS2500ZY24D61RDCE 24 HP* Yanmar 3 Cylinder Liquid Cooled Diesel 155 cm - 61” iCDTM Deck Rear discharge with standard mulching insert ENGINE GROUP • Powered by 24-hp Yanmar three cylinder liquid cooled diesel engine. • Rugged twin 21 litre fuel tanks (42 litres total). • Two-stage industrial air-cleaner. OPERATOR CONTROL & COMFORT SYSTEMS • Full suspension. • Excellent Manoeuvrability. • Pedal lift and lower with single pin height of cut adjustment. • Folding roll over protection structure ROPS with retractable seat belt. • Comfortable seat with added lumbar support. MOWER DECK • Available in 132 cm and 155 cm side and rear discharge cutting width with iCDTM Technology. • Cutting height: 3.8 - 12.7 cm / 1.5 - 5 inch adjusts in 0.6 cm increments. 16 KM/H GROUND SPEED * POWER RATED BY ENGINE MANUFACTURER. • Top greaseable aluminum spindles on 132 cm mowers and top greasable cast iron spindles on 155 cm models. • Flexible rubber discharge chute. SUSPENSION / CHASSIS • Patented four-wheel suspension system dramatically increases quality of cut and operator comfort. ACCESSORIES • iCDTM Mulch kit 132 cm side discharge. • iCDTM Mulch kit 155 cm side discharge. • Trailer hitch kit. • Suspension seat kit. • Light kit (non road use). • Flat free caster tyres. • Dedicated Ferris mulching blades. www.FerrisIndustries.eu | 13 Suspension system consists of rear coil-over-shocks and front independant adjustable coilover-shocks. The foot operated deck lift takes the effort out of adjusting cutting height. Efficient YanmarTM 3 cylinder diesel engine (model 3TNM72). Fans mounted on top of pumps assist in cooling of hydro system and repelling debris. Features top greaseable cast iron (61” models) and aluminum (52” models) spindles for longer useable life. The iCDTM Cutting System allows better airflow, superior cut quality and complements the innovation of the Ferris line. IS® 600Z and IS® 700Z If you are looking for the best value in a compact zero-turn mower, look no further than the Ferris IS® 600Z and IS® 700Z. Featuring our patented suspension technology, iCDTM cutting deck technology, heavy-duty Hydro-Gear® drive system, an engine purpose built for a zero-turn application and mowing speeds up to 16 km/h. These mowers are full of features to provide maximum productivity. The IS® 600Z and IS® 700Z are capable of tackling tight places, providing maximum maneuvrability and productivity. You’ll mow more lawn in less time. MODEL ENGINE DECK IS600ZB2544RDCE 25 HP* Briggs & Stratton V-Twin Commercial Turf SeriesTM Petrol 112 cm - 44” Deck Rear discharge with standard mulching insert IS700ZB2752RDCE 27 HP* Briggs & Stratton V-Twin Commercial Turf SeriesTM Petrol 132 cm - 52” iCDTM Deck Rear discharge with standard mulching insert ENGINE GROUP • Powered by Briggs & Stratton V-Twin Commercial Turf SeriesTM air cooled petrol engines. • Patented advanced 5 step debris management system with integrated cyclonic air cleaner. • Easy to use oil drain tube. • Rugged 21 litre fuel tank. DRIVE SYSTEM • Independent, commercial grade Hydro-Gear® ZT-3400 transaxles, features 18 cm cooling fans that also assist with repelling debris. MOWER DECK •Available in 112 cm and 132 cm cutting widths. •iCDTM Cutting deck technology (132 cm). •Standard mulching insert. •Foot operated deck lift. •Cutting height: 3.8 - 11.4 cm (112 cm) 3.8 - 12.7 cm (132 cm). •Features top greaseable aluminium spindles. SUSPENSION • Patented suspension system enables you to mow rougher ground faster, with a consistent cut quality, allowing you to be more productive. * POWER RATED BY ENGINE MANUFACTURER. CHASSIS • Removable floor plate provides easy maintenance access to deck components. • Ergonomic control panels feature a cup/holder and fuel gauge for operator convenience. • Adjustable contour seat with arm rests. • Heavy duty integrated rear bumper protects the engine compartment. • Folding Roll Over Protection Structure (ROPS) with retractable seat belt. • Pre-wired for simple installation of optional headlight kit (non road use). ACCESSORIES • Trailer hitch kit. • Head light kit (non road use). • Flat free caster tyres. • Dedicated Ferris mulching blades. IS® 600Z 14 KM/H GROUND SPEED IS® 700Z 16 KM/H GROUND SPEED www.FerrisIndustries.eu | 15 Suspension system with independent rear coil-overshocks (shown) and pivoting front axle with front ride dampening shocks. Features top greaseable aluminium spindles for longer usable life. 180° folding ROPS (Roll Over Protection Structure) with retractable seat belt. Heavy Duty bumper protects the engine while also allowing for easy service access. Removable floor plate provides convenient access to the top of the deck for easy cleaning and maintenance. Commercial independent Hydro-Gear® ZT-3400 transaxles, designed for high performance and fully serviceable. Briggs & Stratton Commercial Turf SeriesTM V-Twin air-cooled petrol engines. Features a 5 step debris management system with integrated cyclonic air cleaner. A patent pending suspension and steering system providing a comfortable ride with exceptionally smooth steering performance. F800X The visibility and versatility of the Ferris® F800X cannot be beaten. Its out-front design is perfect for reaching under hedgerows and to trim around trees, bushes and landscaped areas with ease. Thanks to the zero-turn steering system the machine is extremely manoeuvrable. The machine is standard equipped with an electric deck lift which also provides a nearly vertical fold position for easy access to the underside of the deck for cleaning and maintenance. MODEL ENGINE DECK F800XY30D61SDCE 30 HP* Yanmar 3 Cylinder Liquid Cooled Diesel 155 cm - 61” iCDTM Deck Side Discharge with optional mulching kit F800XY30D61RDCE 30 HP* Yanmar 3 Cylinder Liquid Cooled Diesel 155 cm - 61” iCDTM Deck Rear Discharge with standard mulching insert ENGINE GROUP •Powered by 30-hp Yanmar three cylinder liquid cooled diesel engine (model 3TNV82A). • Two-stage industrial air-cleaner. • Rugged twin 27 litre fuel tanks (54 litre total). OPERATOR CONTROL & COMFORT SYSTEMS • Excellent Manoeuvrability. •Standard pivoting two-wheel rear axle. • Floating front frame. •Foot-operated and electric deck-lift with single pin cutting height adjustment. •Foldable ROPS with retractable seat-belt. •Comfortable seat with added lumbar support. •Dedicated Ferris mulching blades. ACCESSORIES •iCDTM Mulch kit 155 cm side discharge. •Flat free caster tyres front and rear wheels. • Dedicated Ferris mulching blades. 16 KM/H GROUND SPEED * POWER RATED BY ENGINE MANUFACTURER. www.FerrisIndustries.eu | 17 Turf friendly chevron tyres provide maximum traction. Comfortable seat with added lumbar support. The iCDTM Cutting System allows better airflow, superior cut quality and complements the innovation of the Ferris line. The pivoting rear axle in conjunction with the floating front frame allows the F800X to follow the contours for a precise accurate finish. Electric deck lift for easy cut height adjustment. The deck can be raised to a near vertical position for easy access during periodic maintenance. The F800X is specially designed for easy maintenance and accessibility. EVOLUTIONTM The forward thinking design of the Ferris® EvolutionTM mower allows the operator to be placed in the most ideal ergonomic position to mow, which is much more comfortable than a stand-on mower. The operators back, shoulders and neck are aligned to minimize discomfort and fatigue. The operators weight is evenly distributed providing comfort throughout the day. Integrated suspension technology heightens the riding experience and delivers outstanding comfort and performance. Especially suitable for the medium-sized gardens that are not accessible with a large machine, but which are too large for an ordinary walk-behind mower. MODEL EVKAV1936SDCE ENGINE DECK 19 HP* Kawasaki V-Twin FH580V Air Cooled Petrol 91 cm - 36” Deck Side discharge with optional mulching ENGINE GROUP •Powered by 19-hp Kawasaki FH580V V-Twin air cooled petrol engine. • Two stage air cleaner. • Rugged 19 litre fuel tank. OPERATOR CONTROL & COMFORT SYSTEMS •Patented Operator Forward Design and Ergonomics. • Unsurpassed manoeuvrability. SUSPENSION / CHASSIS • Steel ladder frame chassis. •Patented fully suspended operators platform and front axle for operator comfort. ACCESSORIES • Grass Catcher. • Mulch kit 91 cm side discharge. • Flat free caster tyres. • Dedicated Ferris mulching blades. MOWER DECK • Available with 91 cm / 36” side discharge cutting deck. •Cutting height 3,8-10.6 cm / 1.5 to 4 inches. • Top greaseable aluminum spindles. Operator is placed in the most ideal ergonomic position to mow. 12 KM/H GROUND SPEED * POWER RATED BY ENGINE MANUFACTURER. www.FerrisIndustries.eu | 19 Seat Design. The contoured seat adjusts in four height and two length positions to customize your ride. Cutting height system. The Ferris EvolutionTM mower features an easyto-use height of cut system. Simply crank the height of cut lever to your desired cutting height. A convenient transport lever makes lifting the entire deck quick and easy. Knee Pads. The knee pads provide the operator with extra comfort. Controls. All the operators controls are positioned in the suspended area of the operator platform. A central bar allows the operator to grip against and to make smooth speed changes and supports as well when mounting and dismounting the machine. Operator Forward Design. The patented operator forward design places the operator in the most ideal ergonomic position for a long day of mowing. A fully adjustable shock absorber holds the entire operators platform minimizing the transfer of shocks from the ground back though to the operator, providing an industry leading level of comfort in such a compact machine. WALK-BEHIND MOWERS www.FerrisIndustries.eu | 21 WALK-BEHINDS When you have got to walk the landscape, there is no better way than with a Ferris ® walk-behind mower. Just like our ride-on mowers, we have engineered our walk-behinds to incorporate innovation and simplicity by design. For example, our ComfortControl TM DD gives users the option to set their speed with our Cruise Control Bar along with the ability to override speed and direction with the thumb controls. And when equipped with the flail mower cutting head, the ComfortControl TM DD-FM mower is prepared to combat the most demanding environments of overgrown area control. The HydroCutTM features a single hydrostatic transmission and is an affordable alternative to belt-drive mowers. Be more productive with our operator-friendly, super-tough walk-behinds with easy access to service components for years of dependable operation. COMFORT CONTROLTM DD-FW35 The FW35 dual hydrostatic walk-behind mower was built from the ground up to meet the demands of professional mowing crews. The new design gives this mower smoother and more user-friendly operation. Featuring a cruise control bar, independent retraction lever steering, thumb controlled speed override, foot operated return-to-neutral controls and a speed indicator. The super tough built, 6mm thick engine deck, offers a low center point of gravity and a wide stance that result in unparalleled traction and stability. MODEL ENGINE DECK FW35KAV2148RDCE 20,5 HP* Kawasaki V-Twin FX651V Air Cooled Petrol 122 cm - 48” Deck Rear discharge with standard mulching insert FW35KAV2152RDCE 20,5 HP* Kawasaki V-Twin FX651V Air Cooled Petrol 132 cm - 52” Deck Rear discharge with standard mulching insert ENGINE GROUP •Powered by Kawasaki FX651V Series air cooled petrol engine. • Two stage industrial air cleaner. • Electric start. • Easy to use oil drain tube. • 19 litres fuel tank. DRIVE SYSTEM The deck is easily adjusted by the single-point quick adjust lever which can be locked away securely. New centralized foot control for neutral position provides the operator with a more natural control. The neutral position is identified on the speed indicator on the dash. Reliably set your speed with the new cruise control bar featuring a convenient speed indicator. •Independent, commercial grade Hydro-Gear® ZT-3100 transaxles, features 18 cm cooling fans that also assist with repelling debris. •Dual elevated hydro fluid reservoirs and dual hydro filters. • Ground speed up to 11 km/h. • Easy access to tracking adjustment. MOWER DECK •Available in 122 cm and 132 cm cutting widths. •3,5mm Fabricated deck construction with double top deck, overlap welded corners and double reinforced side skirts and steel reinforced leading edge. • Single lever cutting height adjustment, loackable. • Cutting height: 3.8 - 12.0 cm. • Features top greaseable aluminium spindles. CHASSIS Narrow transmission guards reduce debris built up to improve air flow and allow for access to the oil filter for maintenance. 11 The new mower deck mounting system provides easier deck leveling, improved flexibility over terrain, and more durable wear points for reduced maintenance. KM/H GROUND SPEED Deck drive belt system is designed to provide even belt tension which improves the life of the belt and reduces maintenance. •Heavy duty 3,0 mm, 38x51 mm frame rails. • 6,35 mm Engine mounting platform. • Flat free caster tyres. •Convenient built in tie-down points for securing equipment. •Control rods securely placed above the engine deck and within the handle bars for optimized protection against damage and dirt. ACCESSORIES • Dedicated Ferris mulching blades. * POWER RATED BY ENGINE MANUFACTURER. COMFORT CONTROLTM DD-FM30 | 23 The Comfort ControlTM DD-FM SeriesTM walk-behind flail mower is designed to combat the most demanding environments and is ideal for mowing rough and overgrown areas. The strong welded steel construction houses a robust flail rotor of 122 cm cutting width with 34 independent flail blades which deliver excellent cutting action. This efficient flail mower is designed to excel in applications such as landscaping, agriculture, utility, maintenance, construction sites, road right-of-ways, trails, and all other areas needing brush or overgrown area control. Cut, mulch and spread, leaving a fine finish, with the FM SeriesTM walk-behind flail mower. MODEL F30KAV2448FLCE ENGINE DECK 23.5 HP* Kawasaki V-Twin Air Cooled FX730V AirPetrol Cooled Petrol 122 cm - 48” Deck Flail mower 9,6 KM/H GROUND SPEED ENGINE GROUP •Powered by 23.5-hp Kawasaki FX730V Series V-Twin air cooled petrol engine. • Rugged 19 litres fuel tank. • Electric start standard. DRIVE SYSTEM 34 J-type flail cutters, rotor bearing debris shields and flexible rubber debris guards. Impact protective guards to avoid damage to rotor bearings and belt drive system. Rotor bearing protection and adjustable hardened skid plates. •Independent, commercial grade Hydro-Gear® ZT-3100 transaxles, features 18 cm cooling fans that also assist with repelling debris. •Dual elevated hydro fluid reservoirs and dual hydro filters. • Ground speed up to 9,6 km/h. • Easy access to tracking adjustment. FLAIL HEAD •Available with 122 cm flail mower cutting width. •Cutting height: 5.0 - 8.9 cm / 2.0 - 3.5 inches. • 6 Height of cut positions. • 34 swinging flail cutters. Strong shaft driven construction with gearbox and universal joint between engine and flail rotor. More than 180 degree belt wrap on drive system from shaft drive to flail rotor. Rotor drive powered by a duplex belt. * POWER RATED BY ENGINE MANUFACTURER. Swept lug design which is more forgiving for accidental impacts. OPERATOR CONTROL & COMFORT SYSTEMS •Steel channel handlebars for increased strength and durability. •Operator friendly controls are comfortable and easy to use. •20” Drive tyres with chevron tread. •Flat free caster tyres assembly. • Overall width front bumper. COMFORT CONTROLTM DD The Comfort ControlTM DD series is built super-tough, with a low, wide stance that results in unparalleled traction and stability. The new “Comfort Control” design gives this mower the smoothest, most user-friendly operation in the industry. The Cruise Control Bar with independent steering override allows the operator a multitude of handling options. MODEL ENGINE DECK CCWKAV1536SDCE 15 HP* Kawasaki V-Twin Air Cooled FS541V AirPetrol Cooled Petrol 91 cm - 36” Deck Side discharge with optional mulching kit CCWKAV1536RDCE 15 HP* Kawasaki V-Twin FS541V Air Cooled Petrol 91 cm - 36” Deck Rear discharge with optional mulching kit 9,6 KM/H GROUND SPEED ENGINE GROUP •Powered by 15 HP* Kawasaki FS541V Series V-Twin air cooled petrol engine. •Rugged 19 litres fuel tank with extra large filler neck. •Electric start standard on all models. MOWER DECK Centrally mounted speed control with individual controls left and right for steering. Quick access to transmission release. •Available in 91 cm side and rear discharge cutting widths. •Cutting height: 4.4 - 12 cm / 1.7- 4,7 inches infinite variable adjustable. •Quick-adjust deck allows operator to change cut height quickly and easily. •Self-contained dual transmissions are individually fan cooled and filtered. • Features top greaseable aluminum spindles for longer useable life. OPERATOR CONTROL & COMFORT SYSTEMS •Steel channel handlebars for increased strength and durability. •Operator friendly cushioned controls are comfortable and easy to use. • Flat free caster tyres. ACCESSORIES Double quick adjust cutting height adjustment levers. * POWER RATED BY ENGINE MANUFACTURER. Easy height-of-cut read out. •Mulch kit 91 cm side discharge. •Mulch kit 91 cm rear discharge. •Grass collector on 36” side discharge model. •Dedicated Ferris mulching blades. HYDRO CUTTM www.FerrisIndustries.eu | 25 The HydroCutTM Single Drive series is a class by itself. The single hydrostatic transmission found on the HydroCut makes this mower extremely easy to operate. It offers many productivity enhancing features including Integrated Comfort Controls (ICC) for simple manoeuvering and Quick-Adjust height of- cut control. Available in 81 cm cutting width, this machine can tackle tight places and tight budgets too. MODEL ENGINE DECK HCKAV1532SDCE 15 HP* Kawasaki V-Twin FS541V Air Cooled Petrol 81 cm - 32” Deck Side discharge with optional mulching kit HCKAV1532RDCE 15 HP* Kawasaki V-Twin FS541V Air Cooled Petrol 81 cm - 32” Deck Rear discharge 8,8 KM/H GROUND SPEED ENGINE GROUP •Powered by 15 HP* Kawasaki FS541V Series V-Twin air cooled petrol engine. • Rugged 19 litre fuel tank with extra large filler neck. • Hydrostatic transmission is more efficient and productive than gear-drive mowers. • Electric start standard for operator convenience. Height-of-cut indicator ensures consistent results. The deck is easily adjusted by the quick-adjust lever. Cutting height ranges from 3.8 - 11.5 cm. MOWER DECK • Available in 81 cm side and rear discharge cutting width. • Cutting height: 3.8 - 11.5 cm / 1.5 - 4,5 inches variable adjust. • Quick-adjust variable height-of-cut control is fast and easy. • Features top greaseable aluminum spindles for longer useable life. OPERATOR CONTROL & COMFORT SYSTEMS •Integrated Comfort Controls (ICC) are user-friendly and can be operated with just one hand. ACCESSORIES The convenience of electric start is a standard feature. Integrated Comfort Controls (ICCTM) are thumb operated. No need to take your hands off the handlebars to adjust speed or direction, forward & backward. So simple to use it can be operated with just one hand! • Mulch kit 81 cm side discharge. •Grass collector on 32” side discharge model. • Flat free caster tyres. • Dedicated Ferris mulching blades. * POWER RATED BY ENGINE MANUFACTURER. ACCESSORIES GRASS CATCHER: MULCH KIT: Comes with baffles, hardware and instruction sheet. Select kits include dedicated blades. For following light duty trailers. TRAILER HITCH KIT: LIGHT KIT: 360° ANTI SCALP WHEEL CASTER KIT SUSPENSION SEAT: SUSPENSION SEAT INSERT: FLAT-FREE CASTER TYRES: A lightweight durable fabric bag with hard plastic bottom attaches quickly. ACCESSORIES Grass Catcher Mulch Kit Mulch Blades Trailer Hitch Kit Light Kit (non road) 360° Anti Scalp Wheel Caster Kit Suspension Seat Suspension Seat Insert Flat-Free Caster Tyres ACCESSORIES Grass Catcher Mulch Kit Mulch Blades Trailer Hitch Kit Light Kit (non road) 360° Anti Scalp Wheel Caster Kit Suspension Seat Suspension Seat Insert Flat-Free Caster Tyres • = Optional STD = Standard Suspension seat for optimal comfort. IS® 5100Z 61” RD 72” SD 72” RD STD • • • • • STD • • • • • • • • • • • • • • Add this to the premium adjustable seat for increased comfort. 52” SD Zero-Turns IS® 2500Z 52” RD 61” SD 61” RD • • Run all day with no flats, eliminates down time. IS® 600Z 44” RD IS® 700Z 52” RD • • • • STD • • • • • • • STD • • • STD • • • STD • • • • • • • • • • • • • • • • • Front Mower Zero-Turn CCTM DD F800X EVOTM 61” SD 61” RD 36” SD 48” RD 52” RD • • STD • STD STD • • • • • • Select models are pre-wired for simple installation (non road). STD STD Walk-Behinds CCTM DD-FM CCTM DD 48” FLAIL 36” SD 36” RD • • • • • STD STD STD HCTM 32” SD 32” RD • • • • • 80% 100%80% 100%80% 100%80% 100%80% 100%80% 100% 80% 100% 81 81 91 91 112112122 122132132155155183183 0.39 0.490.440.550.540.670.59 0.730.63 0.790.74 0.93 0.88 1.10 0.42 0.530.470.590.580.730.63 0.790.69 0.860.81 1.01 0.95 1.19 0.45 0.570.510.640.630.780.68 0.850.74 0.920.87 1.09 1.02 1.28 0.49 0.610.550.680.670.840.73 0.920.79 0.990.93 1.16 1.10 1.37 0.52 0.650.580.730.720.900.78 0.980.84 1.060.99 1.24 1.17 1.46 0.55 0.690.620.770.760.950.83 1.040.90 1.121.05 1.32 1.24 1.56 0.58 0.730.660.820.811.010.88 1.100.95 1.191.12 1.40 1.32 1.65 0.62 0.770.690.860.851.060.93 1.161.00 1.251.18 1.47 1.39 1.74 0.65 0.810.730.910.901.120.98 1.221.06 1.321.24 1.55 1.46 1.83 0.68 0.850.760.960.941.181.02 1.281.11 1.391.30 1.63 1.54 1.92 0.71 0.890.801.000.991.231.07 1.341.16 1.451.36 1.71 1.61 2.01 0.75 0.930.841.051.031.291.12 1.401.21 1.521.43 1.78 1.68 2.10 0.78 0.970.871.091.081.341.17 1.461.27 1.581.49 1.86 1.76 2.20 0.81 1.010.911.141.121.401.22 1.531.32 1.651.55 1.94 1.83 2.29 0.84 1.050.951.181.161.461.27 1.591.37 1.721.61 2.02 1.90 2.38 0.87 1.090.981.231.211.511.32 1.651.43 1.781.67 2.09 1.98 2.47 0.91 1.131.021.271.251.571.37 1.711.48 1.851.74 2.17 2.05 2.56 0.94 1.171.061.321.301.621.42 1.771.53 1.911.80 2.25 2.12 2.65 0.97 1.221.091.371.341.681.46 1.831.58 1.981.86 2.33 2.20 2.75 1.00 1.261.131.411.391.741.51 1.891.64 2.051.92 2.40 2.27 2.84 1.04 1.301.161.461.431.791.56 1.951.69 2.111.98 2.48 2.34 2.93 1.07 1.341.201.501.481.851.61 2.011.74 2.182.05 2.56 2.42 3.02 1.10 1.381.241.551.521.901.66 2.071.80 2.242.11 2.64 2.49 3.11 1.13 1.421.271.591.571.961.71 2.141.85 2.312.17 2.71 2.56 3.20 1.17 1.461.311.641.612.021.76 2.201.90 2.382.23 2.79 2.64 3.29 1.20 1.501.351.681.662.071.81 2.261.95 2.442.29 2.87 2.71 3.39 1.23 1.541.381.731.702.131.85 2.322.01 2.512.36 2.95 2.78 3.48 EFFICIENCY WIDTH CM CUTTING GROUND SPEED KM/H KM 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 80% EFFICIENCY IS FOR AVERAGE USE WITH TURNS. FLOWERBEDS ETC. PRODUCTIVITY HECTARES PER HOUR: 1 HECTARE IS 10.000 M2 GRASSCUTTING PRODUCTIVITY TABLE www.FerrisIndustries.eu | 27 SPECIFICATIONS IS®5100ZC33D72RDCE IS®5100ZC33D72SDCE ENGINE Caterpillar - Diesel C1.5 33.5 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 56 Litres Caterpillar - Diesel C1.5 33.5 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 56 Litres 183 cm / 72” Rear Discharge iCD™ Standard mulch insert 3.8 - 15.2 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 257 mm, 31,75 mm shaft Hydraulic 183 cm / 72” Side Discharge iCD™ Optional mulching kit 3.8 - 15.2 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 257 mm, 31,75 mm shaft Hydraulic Suspension 4-Wheel independant suspension 4-Wheel independant suspension Transmission Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 26 x 12.00 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 26 x 12.00 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) 0 - 19,3 km/h 0 - 9.6 km/h 0 - 19,3 km/h 0 - 9.6 km/h 255 cm 186 n.a. 1070 255 cm 198 221 1070 Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Disc type Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Disc type 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades Make Model Horsepower Cylinders Cooling PTO Starting Fuel Capacity (litres) MOWER Cutting width (cm/inch) Mulching system Cutting Height (cm) Deck Construction Mower Spindles Deck lift system SUSPENSION & DRIVE TRAIN Drive Axles Drive Tyres (inch) Caster Tyres (inch) GROUND SPEED Speed-fwd. (km/h) Speed-rev. (km/h) DIMENSIONS Overall length (cm) Overall width (cm) Overall width deflector down (cm) Dry weight (Kgs) OPERATOR CONTROL & COMFORT SYSTEMS Certified Roll-Over Protection Structure Instrumentation Controls - Safety Group Parking Brake / Safety Circuit WARRANTY Engine Transmission Balance of machine www.FerrisIndustries.eu | 29 IS®5100ZC33D61RDCE IS®2500ZY24D61RDCE ENGINE Caterpillar - Diesel C1.5 33.5 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 56 Litres Yanmar - Diesel 3TNM72 24 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 42 Litres 155 cm / 61” Rear Discharge iCD™ Standard mulch insert 3.8 - 15.2 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 257 mm, 31,75 mm shaft Hydraulic 155 cm / 61” Rear Discharge iCD™ Standard mulch insert 3.8 - 12.7 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 201 mm, 25,4 mm shaft Foot pedal, spring assisted Suspension 4-Wheel independant suspension 4-Wheel independant suspension Transmission Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 26 x 12.00 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 23 x 10.50 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) 0 - 19,3 km/h 0 - 9.6 km/h 0 - 16.0 km/h 0 - 8.0 km/h 255 cm 159 n.a. 1021 211 159 n.a. 712 Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Disc type Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Drum type 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades Make Model Horsepower Cylinders Cooling PTO Starting Fuel Capacity (litres) MOWER Cutting width (cm/inch) Mulching system Cutting Height (cm) Deck Construction Mower Spindles Deck lift system SUSPENSION & DRIVE TRAIN Drive Axles Drive Tyres (inch) Caster Tyres (inch) GROUND SPEED Speed-fwd. (km/h) Speed-rev. (km/h) DIMENSIONS Overall length (cm) Overall width (cm) Overall width deflector down (cm) Dry weight (Kgs) OPERATOR CONTROL & COMFORT SYSTEMS Certified Roll-Over Protection Structure Instrumentation Controls - Safety Group Parking Brake / Safety Circuit WARRANTY Engine Transmission Balance of machine SPECIFICATIONS IS®2500ZY24D61SDCE IS®2500ZY24D52RDCE IS®2500ZY24D52SDCE Yanmar - Diesel 3TNM72 24 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 42 Litres Yanmar - Diesel 3TNM72 24 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 42 Litres Yanmar - Diesel 3TNM72 24 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 42 Litres 155 cm / 61” Side Discharge iCD™ Optional mulching kit 3.8 - 12.7 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 201 mm, 25,4 mm shaft Foot pedal, spring assisted 132 cm / 52” Rear Discharge iCD™ Standard mulch insert 3.8 - 12.7 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 9,5 mm front bumper bar, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Foot pedal, spring assisted 132 cm / 52” Side Discharge iCD™ Optional mulching kit 3.8 - 12.7 cm 4.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 9,5 mm front bumper bar, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Foot pedal, spring assisted 4-Wheel independant suspension 4-Wheel independant suspension 4-Wheel independant suspension Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 23 x 10.50 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 23 x 9.50 - 12 (4 ply) 13 x 5.00 - 6 (4 ply) Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 23 x 9.50 - 12 (4 ply) 13 x 5.00 - 6 (4 ply) 0 - 16.0 km/h 0 - 8.0 km/h 0 - 16.0 km/h 0 - 8.0 km/h 0 - 16.0 km/h 0 - 8.0 km/h 211 171 194 712 211 135 n.a. 707 211 147 170 707 Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Drum type Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Drum type Standard, foldable with seat belt Fuel level gauge in each tank, visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Drum type 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades www.FerrisIndustries.eu | 31 IS®700ZB2752RDCE IS®600ZB2544RDCE ENGINE Make Model Horsepower Cylinders Cooling PTO Starting Fuel Capacity (litres) Briggs & Stratton - Petrol Commercial Turf SeriesTM 27 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 21 Litres Briggs & Stratton - Petrol Commercial Turf SeriesTM 25 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 21 Litres 132 cm / 52” Rear Discharge iCD™ Standard mulch insert 3.8 - 12.7 cm 3,6 mm fabricated construction, full width double top deck, 6.4 mm scuff guards, bull nose front, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Foot pedal, spring assisted 112 cm / 44” Rear Discharge Standard mulch insert 3.8 - 12.7 cm 3,6 mm fabricated construction, full width double top deck, 6.4 mm scuff guards, bull nose front, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Foot pedal, spring assisted Rear wheel suspension, pivoting front axle with front ride dampening shocks Individual Hydro Gear ZT-3400 integrated transmissions 28,6 mm Tapered with 4-bolt flange 22 x 11.00 - 10 (4 ply) 13 x 5.00 - 6 (4 ply) Rear wheel suspension, pivoting front axle with front ride dampening shocks Individual Hydro Gear ZT-3400 integrated transmissions 28,6 mm Tapered with 4-bolt flange 20 x 8.00 - 10 (4 ply) 11 x 4.00 - 5 (4 ply) 0 - 16.0 km/h 0 - 8.0 km/h 0 - 14.5 km/h 0 - 6.4 km/h 206 137 n.a. 480 203 117 n.a. 418 Standard, foldable with seat belt Fuel gauge, hour meter Standard, foldable with seat belt Fuel gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Drum type Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Drum type 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades MOWER Cutting width (cm/inch) Mulching system Cutting Height (cm) Deck Construction Mower Spindles Deck lift system SUSPENSION & DRIVE TRAIN Suspension Transmission Drive Axles Drive Tyres (inch) Caster Tyres (inch) GROUND SPEED Speed-fwd. (km/h) Speed-rev. (km/h) DIMENSIONS Overall length (cm) Overall width (cm) Overall width deflector down (cm) Dry weight (Kgs) OPERATOR CONTROL & COMFORT SYSTEMS Certified Roll-Over Protection Structure Instrumentation Controls - Safety Group Parking Brake / Safety Circuit WARRANTY Engine Transmission Balance of machine SPECIFICATIONS F800XY30D61RDCE F800XY30D61SDCE EVKAV1936SDCE Yanmar - Diesel 3TNV82 30 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 54 Litres Yanmar - Diesel 3TNV82 30 HP 3 Cylinders in line Liquid cooled Electric PTO clutch Electric 54 Litres Kawasaki - Petrol FH580V 19 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres 155 cm / 61” Rear Discharge iCD™ Standard mulch insert 3.8 - 12.7 cm 3.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 201 mm, 25,4 mm shaft Electric, foot pedal override 155 cm / 61” Side Discharge iCD™ Optional mulching kit 3.8 - 12.7 cm 3.6 mm fabricated construction, full width double top deck, 12.7 mm scuff guards, 12,7 mm front bumper bar, overlap welded corners Cast iron 201 mm, 25,4 mm shaft Electric, foot pedal override 91 cm / 36” Side Discharge Optional mulching kit 3.8 - 10.6 cm 3.6 mm fabricated construction, 6.35 mm scuff guards, 6.35 mm front bumper bar, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Hand lever, spring assisted n.a. n.a. Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 24 x 12.00 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) / 11 x 4.00 - 5 (4 ply) Individual Hydro Gear pumps and Parker wheel motors 31.75 mm Tapered with 5-bolt flange 24 x 12.00 - 12 (4 ply) 13 x 6.50 - 6 (4 ply) / 11 x 4.00 - 5 (4 ply) Fully suspended operators platform, pivoting front axle with front ride dampening shocks Individual Hydro Gear pumps and wheel motors 25,4 mm Tapered with 4-bolt flange 18 x 8.50 - 10 (4 ply) 11 x 4.00 - 5 (4 ply) 0 - 16.0 km/h 0 - 8.0 km/h 0 - 16.0 km/h 0 - 8.0 km/h 0 - 12.0 km/h 0 - 6.0 km/h 283 159 n.a. 857 283 171 194 857 157 106 129 371 Standard, foldable with seat belt Visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Disc type Standard, foldable with seat belt Visual water temperature gauge, oil pressure gauge, hour meter Seat activated engine kill, PTO clutch safety switch, neutral and parking brake safety circuit Disc type n.a. Hour meter Seat activated engine kill PTO clutch safety switch, neutral and parking brake safety circuit Drum type 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades www.FerrisIndustries.eu | 33 FM30KAV2448FLCE FW35KAV2152RDCE ENGINE Kawasaki - Petrol FX730V 23.5 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres Kawasaki - Petrol FX651V 20.5 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres 122 cm / 48” Flail mower n.a. 5.0 - 8.9 cm 3.6 / 4.6 mm fabricated construction with secondary internal shroud Drum type 102 mm with 34 individual swinging cutters 5 Individual spacers 122 cm / 48” Rear Discharge Standard mulch insert 3.8 - 12.0 cm 3.6 mm fabricated construction, full width double top deck, 6.35 mm scuff guards, 9.5 mm front bumper bar, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Central heigth adjustment with single hand wheel Suspension n.a. n.a. Transmission Individual Hydro Gear ZT-3100 integrated transmissions 25,4 mm Tapered with 4-bolt flange 20 x 8.00 - 10 (4 ply) chevron tread 9 x 3.50 - 4 (4 ply) flat free Individual Hydro Gear ZT-3100 integrated transmissions 25,4 mm Tapered with 4-bolt flange 20 x 8.00 - 10 (4 ply) 11 x 4.00 - 5 (4 ply) flat free 0 - 9.6 km/h 0 - 3.2 km/h 0 - 11 km/h 0 - 3.2 km/h 210 140 n.a. 354 200 135 n.a. 370 n.a. n.a. n.a. Speed indicator, hour meter Operator presence, cruise Control Bar, independent forward and reverse levers, Foot-activated neutral Internal transaxle lock Operator presence, cruise Control Bar, independent forward and reverse levers, Foot-activated neutral Internal transaxle lock 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades Make Model Horsepower Cylinders Cooling PTO Starting Fuel Capacity (litres) MOWER Cutting width (cm/inch) Mulching system Cutting Height (cm) Deck Construction Mower Spindles Deck lift system SUSPENSION & DRIVE TRAIN Drive Axles Drive Tyres (inch) Caster Tyres (inch) GROUND SPEED Speed-fwd. (km/h) Speed-rev. (km/h) DIMENSIONS Overall length (cm) Overall width (cm) Overall width deflector down (cm) Dry weight (Kgs) OPERATOR CONTROL & COMFORT SYSTEMS Certified Roll-Over Protection Structure Instrumentation Controls - Safety Group Parking Brake / Safety Circuit WARRANTY Engine Transmission Balance of machine SPECIFICATIONS FW35KAV2148RDCE CCWKAV1536RDCE ENGINE Kawasaki - Petrol FX651V 20.5 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres Kawasaki - Petrol FS541V 15 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres 122 cm / 48” Rear Discharge Standard mulch insert 3.8 - 12.0 cm 3.6 mm fabricated construction, full width double top deck, 6.35 mm scuff guards, 9.5 mm front bumper bar, overlap welded corners Cast aluminium 133 mm, 25,4 mm shaft Central heigth adjustment with single hand wheel 91 cm / 36” Rear Discharge Optional mulching kit 4.4 - 12.0 cm 3.6 mm fabricated construction, double top bearing housing, reinforcement, 3.6 mm scuff guards Suspension n.a. n.a. Transmission Individual Hydro Gear ZT-3100 integrated transmissions 25,4 mm Tapered with 4-bolt flange 20 x 7.00 - 10 (4 ply) 11 x 4.00 - 5 (4 ply) flat free Individual Hydro Gear ZT-3100 integrated transmissions 25,4 mm Tapered with 4-bolt flange 20 x 7.00 - 10 (4 ply) 11 x 4.00 - 5 (4 ply) flat free 0 - 11 km/h 0 - 3.2 km/h 0 - 9.6 km/h 0 - 3.2 km/h 200 125 n.a. 367 198 94 n.a. 255 n.a. Speed indicator, hour meter n.a. n.a. Operator presence, cruise Control Bar, independent forward and reverse levers, Foot-activated neutral Internal transaxle lock Operator presence, cruise Control Bar, independent forward and reverse levers, Foot-activated neutral Internal transaxle lock 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades Make Model Horsepower Cylinders Cooling PTO Starting Fuel Capacity (litres) MOWER Cutting width (cm/inch) Mulching system Cutting Height (cm) Deck Construction Mower Spindles Deck lift system Cast aluminium 133 mm, 25,4 mm shaft Central heigth adjustment with double hand wheels SUSPENSION & DRIVE TRAIN Drive Axles Drive Tyres (inch) Caster Tyres (inch) GROUND SPEED Speed-fwd. (km/h) Speed-rev. (km/h) DIMENSIONS Overall length (cm) Overall width (cm) Overall width deflector down (cm) Dry weight (Kgs) OPERATOR CONTROL & COMFORT SYSTEMS Certified Roll-Over Protection Structure Instrumentation Controls - Safety Group Parking Brake / Safety Circuit WARRANTY Engine Transmission Balance of machine www.FerrisIndustries.eu | 35 CCWKAV1536SDCE HCKAV1532RDCE HCKAV1532SDCE Kawasaki - Petrol FS541V 15 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres Kawasaki - Petrol FS541V 15 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres Kawasaki - Petrol FS541V 15 HP 2 Cylinders V-Twin Air cooled Electric PTO clutch Electric 19 Litres 91 cm / 36” Side Discharge Optional mulching kit 4.4 - 12.0 cm 3.6 mm fabricated construction, double top bearing housing, reinforcement, 3.6 mm scuff guards 81 cm / 32” Rear Discharge n.a. 3.8 - 11.5 cm 3.6 mm fabricated construction, double top bearing housing, reinforcement, 3.6 mm scuff guards 81 cm / 32” Side Discharge Optional mulching kit 3.8 - 11.5 cm 3.6 mm fabricated construction, double top bearing housing, reinforcement, 3.6 mm scuff guards Cast aluminium 133 mm, 25,4 mm shaft Central heigth adjustment with double hand wheels Cast aluminium 133 mm, 25,4 mm shaft Central heigth adjustment with single hand wheel Cast aluminium 133 mm, 25,4 mm shaft Central heigth adjustment with single hand wheel n.a. n.a. n.a. Individual Hydro Gear ZT-3100 integrated transmissions 25,4 mm Tapered with 4-bolt flange 20 x 7.00 - 10 (4 ply) 11 x 4.00 - 5 (4 ply) flat free Hydro Gear 0510 single hydrostatic transmission 19 mm Tapered with 4-bolt flange 16 x 6.5 - 8 (4 ply) 9 x 3.5 - 4 (4 ply) Hydro Gear 0510 single hydrostatic transmission 19 mm Tapered with 4-bolt flange 16 x 6.5 - 8 (4 ply) 9 x 3.5 - 4 (4 ply) 0 - 9.6 km/h 0 - 3.2 km/h 0 - 8.8 km/h 0 - 3.2 km/h 0 - 8.8 km/h 0 - 3.2 km/h 198 106 129 255 192 83 n.a. 156 192 95 118 156 n.a. n.a. n.a. n.a. n.a. n.a. Operator presence, cruise Control Bar, independent forward and reverse levers, Foot-activated neutral Internal transaxle lock Operator presence, integrated comfort controls I.C.C. Operator presence, integrated comfort controls I.C.C. Internal transaxle lock Internal transaxle lock 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades 2-Year Manufacturer’s Warranty 2-Year Manufacturer’s Warranty 2- Year commercial use, front-to-rear, parts & labor excluding belts, tyres, brake pads, battery and blades VISIT OUR WEBSITE: www.Ferrisindustries.eu DISTRIBUTED BY: YOUR AUTHORISED FERRIS DEALER IS: Caterpillar® is a registered trademark of Caterpillar Inc. Hydro-Gear® is a trademark of Hydro-Gear Inc. and is used under license Kawasaki® is a registered trademark of Kawasaki Motors Corporation Marbain® is a registered trademark of The Fisher-Barton Group YanmarTM is a trademark of Yanmar ParkerTM is a registered trademark of Parker Hannifin Corp Kawasaki: All power levels are stated gross horsepower per SAE J1995 / SAE J2723. Briggs & Stratton: All power levels are stated gross horsepower per SAE J1940. Caterpillar and Yanmar: All power levels are provided by manufacturer. Not all products shown in this catalogue are available in your market. Please contact your dealer for information on what is available in your country. Briggs & Stratton is not responsible for typographical errors. All typographical errors are subject to correction. 2014 © Briggs & Stratton Corporation. We reserve the right to discontinue models or change specifications without notice. All rights reserved. BRIGGS&STRATTON P.O. BOX 12 • 6040 AA ROERMOND • THE NETHERLANDS TEL. +31 (0)475 40 83 83 • FAX. +31 (0)475 40 83 84 WWW.BRIGGSANDSTRATTON.NL [email protected] Rev. 01/2014EU-EN