T8 LED Tube
Transcription
T8 LED Tube
T8 LED Tube The Fintronx T8 LED Tube is manufactured from the highest quality components and is designed for the 24/7 commercial and industrial environments. Unlike the traditional glass fluorescent tubes, the Fintronx T8 LED Tubes are constructed of durable, shatter-proof plastic and aluminum. They contain no mercury and are100% recyclable. Fintronx uses internal drivers which allows users to install the Fintronx T8 LED Tubes in their existing fixtures. Fintronx T8 LED Tubes eliminate many of the issues caused by fluorescent tubes such as, color-shifting, flickering, humming, and the high maintenance cost of replacing ballasts and lamps. The 100,000 hour life span of the Fintronx T8 LED Tube will provide 10+ years of 24/7 continuous light and will yield up to 75% in energy savings. The combined savings from the reduction in electricity and the cost of maintenance typically yields a ROI in two years or less. Installing new T8 LED Tubes will significantly improve the lighting in any environment. The Fintronx T8 LED Tube is a great fit for offices, schools, hospitals, retail and other facilities currently using traditional fluorescent tubes. They are designed to look exactly like traditional fluorescent tubes and are replaced exactly the same way. Technical Parameters DLC Listed Product Name Wattage Voltage CRI Dimensions Color Temp Lens Type Lumens FL05G 18W 22W 120 – 277V >80 Length: 48 ” Diameter: 1.10 4000K 5000K Frosted Clear 1882 2502 FL05G 10W 120 – 277V >80 Length: 24 ” Diameter: 1.10 ” 4000K Frosted 941 Option Key Options Option Code 18 Watt 4 ft. 18 22 Watt 4 ft. 22 10 Watt 2 ft. 10 4000 Kelvin 40K 5000 Kelvin 50K Clear Lens C Frosted Lens F Item Number FL0G5 Wattage Kelvin Lens Order Number 18 40K F FL05G1840KF 22 50K C FL05G2250KC 10 40K F FL05G1040KF To retrofit lighting fixtures, please follow the steps below: 1. 2. 3. 4. 5. 6. 7. 8. Use only a certified electrician to retrofit the light fixture Make sure the power is turned off Remove the fluorescent tubes Remove or by-pass the ballast Rewire the hot end according to the diagram above Replace the lamp holders with the non-shunted lamp holders Install the LED tubes Turn the power on 5995 Chapel Hill Road Suite 119 Raleigh, NC 27607 (919) 324-3960 www.fintronx.com