2908033 Commercial Vehicles.qxd

ROLLFORM SECTIONS LIMITED
SECTIONS FOR
COMMERCIAL
VEHICLES
The Hadley Group are the United
Kingdoms No.1 supplier of bespoke cold
rolled products with over 40 years
experience in cold rolled section design
and manufacture.
We supply a comprehensive range
of standard Cold Rolled products for use
in both commercial vehicles and
trailers.
In addition to our standard stock
programme we also have the
ability to value engineer new
and existing profiles to
meet our customers
ever increasing
demands on
quality & cost.
TRANSPORT
DATACV01
CARGO
RESTRAINT TRACK
An outwardly simple component used in
millions of trailers worldwide has been
re-engineered by The Hadley Group and has
achieved rapid success in both the U.K. and
European commercial vehicle industry.
We have transformed what has traditionally
been a 2 or 3 stage production process into 1.
The result is an improvement in manufacturing
volume by a factor of 4 with consequential
improvements in cost, quality and service.
The Hadley Group has applied its
considerable manufacturing expertise to
advanced cargo restraint track production.
The company offers virtually any combination
of slot patterns, material types and finishes for
specialist applications. Our most common
tracks are featured and are available from
stock within 10 working days.
1805 CARGO
RESTRAINT
TRACK
4018++00
AVAILABLE IN
PRE-GALVANISED
ZINC PLATED
MATERIAL, IN 1.6mm
GAUGE
ø25.4
12.5
Optional ø10mm Drainage Holes
ø25.4
UNIVERSAL
TRACK
3272EC68
9.7
131.0
AVAILABLE IN
STAINLESS STEEL
PRE-GALVANISED
BRIGHT ZINC PLATED
MATERIAL, IN
2.0/2.3/2.5/3.0mm
GAUGE
41.2
81.0
AVAILABLE IN
STAINLESS STEEL
PRE-GALVANISED
BRIGHT ZINC PLATED
MATERIAL, IN
2.0/2.3/2.5/3.0mm
GAUGE
NB: ALL SIZES IN mm
ø25.0
ø5.0
ø10mm Drainage Holes
60.0
131.0
AVAILABLE IN
STAINLESS STEEL
PRE-GALVANISED
BRIGHT ZINC PLATED
MATERIAL, IN
2.0/2.3/2.5/3.0mm
GAUGE
9.7
ø7.13
50.8
25.0
COMBI PLUS
TRACK
3272AC07
ø4.34
61.0
1806 CARGO
RESTRAINT
TRACK
3271++00
41.2
64.45
12.0
available as either ø20
or ø25mm pierced hole
ø5.0
ø10mm Drainage Holes
COMMERCIAL VEHICLE
PRODUCTS
In addition to the cargo restraint track
we also have the capability to be able to
supply the following cold rolled sections
for use within the commercial vehicle
industry.
The products are available from stock
within 10 working days and are
manufactured from pre-galvanised
material.
All items can be cut to length as required
to suit individual customers specifications.
LIPPED CHANNEL SECTION (BEARER)
PROD. No.
C
A
B
C
GAUGE
4331++00
75mm
50mm
13mm
2.0mm
4332++00
100mm 50mm
13mm
2.4mm
4333++00
100mm 50mm
13mm
3.0mm
B
A
PLAIN CHANNEL SECTION (RUNNER)
PROD. No.
A
B
GAUGE
4334++00
100mm 50mm
5.0mm
4335++00
127mm 50mm
5.0mm
4336++00
130mm 50mm
3.0mm
4337++00
150mm 50mm
5.0mm
4378++00
150mm 50mm
3.0mm
B
A
TOP HAT SECTION
STANDARD RISE FOR THIS ITEM IS 25mm ±
5MM AND IS SUPPLIED EITHER
FLANGES UP OR FLANGES DOWN
C
B
PROD. No.
3211++00
A
B
C
GAUGE
25mm
30mm
20mm
0.9mm
NB: ALL SIZES IN mm
A
COMMERCIAL VEHICLE
PRODUCTS
BOWLER HAT SECTION
STANDARD RISE FOR THIS ITEM IS 25mm ± 5MM
AND IS SUPPLIED EITHER
FLANGES UP OR FLANGES DOWN
A
C
PROD. No.
A
B
C
GAUGE
B
80171A+00 67.5mm 38.3mm 29.25mm 1.0mm
CURTAIN TRACK SECTION
PROD. No.
4532++00
A
B
C
GAUGE
38mm
46mm
10mm
2.0mm
C
B
R6
A
INNER SIDE RAVE ANGLE
PROD. No.
4379++00
A
B
103mm 25mm
-
GAUGE
-
3.0mm
A
R 2.5
B
ROLLFORM SECTIONS LIMITED
www.hadleygroup.co.uk
P.O. Box 92, Downing Street, Smethwick, West Midlands, B66 2PA
Telephone: +44 (0) 121 555 1310
Fax:
+44 (0) 121 555 1311
E-mail:
[email protected]
JRD/SP0001/
AWARDED TO HADLEY INDUSTRIES PLC
QUEEN’S AWARDS FOR ENTERPRISE
INNOVATION 2006
In accordance with the manufacturers’ policy of continuous improvement, we reserve the right to alter specification without prior notice. Whilst every
precaution has been taken to ensure that the accuracy of data, information or recommendations herein no liability in respect of such data, information
or recommendations whether given negligently or otherwise can be accepted by the company.