Plasma Cutter
Transcription
Plasma Cutter
Inverter Air Plasma Cutting System Plasma Cutter APC-15CA FEATURES Compressor is not built-in ● Excellent Performance at AC 120V (maximum 19A). ● Ultra small and light design only for 18.1lb (8.2kg). ● Duty cycle for 40% at maximum output. ・The safety function equipped in the torch prevents electric shock. ・The protecting function loaded for the use over its duty cycle ensures no damage of the equipment caused by overheating. ・The capability for excellent cutting is: Material Thickness of board Mild Steel 0.16" (4.0mm) Stainless Steel 0.12" (3.0mm) Aluminum 0.08" (2.0mm) Brass 0.06" (1.5mm) Cupper 0.04" (1.0mm) ・This enables you to cut mild steel board of thickness up to 0.13" (3.2mm) in good condition even from 120V/15A outlet. ・When using a compressor, the minimum amount of necessary air emission is 25L/min. (0.2∼0.3MPa). A new section brought from SUZUKID! SPADA, an Italian meaning "Sword", realizes free and universal cutting and clipping in safety. SUZUKID's technology of welding at 115V-120V will change the cutting scene at 115V-120V as well Specifications Product Name Spada Model Number APC-15CA Rated Input Voltage Single Phase 120V STAR ELECTRIC MFG CO.,LTD. - A New Spark to the Welding Scene 17-15, Minami-Fujisawa, Fujisawa-City Kanagawa-Pref. 251-0055, Japan TEL: 81-466-27-2666 FAX: 81-466-27-1055 URL: http://www.suzukid.co.jp E-mail: [email protected] Standard Accessories 1. Ground clamp (cord length 9.8ft connected to the unit) 2. Torch Rated Output Current DC 13.5A Rated Frequency 60Hz Rated Duty Cycle 40% 3. Power supply cord Rated Input Current AC 19A Rated Input 2.28kVA 4. 2P・120V adaptor Thickness of Board Mild steel: 0.02"∼0.24" (for cutting off), 0.02"∼ 0.16" (for cutting in good condition) Air Pressure 0.2∼0.3MPa (cord length 13.1ft connected to the unit) (cord length 6.6ft connected to the unit) 5. Air regulator with drain Optional Accessories 1. P-771 Electrode (5 pcs set) 2. P-772 Tip (5 pcs set) 3. P-773 Distributor (1 piece) Dimension 5.94" (W) x 14.17" (L) x 9.96" (H) 4. P-774 Shield Cap (1 piece) Net Weight 18.1lb. 5. P-775 Air regulator with drain 6. P-776 Compass set for circular cutting