MESA® Sole Series Enclosures

MESA® Sole Series Enclosures
nDoor mounted heat exchanger
for thermal control
The MESA® Sole Series offers thermal management,
battery backup and room for wireless carrier equipment
to meet your small cell application needs.
nExternal AC power box with a
2-position load center
Description
Key Features
nOptional vented base chamber
for batteries
nOptional right side-mounted
customer access module
nDesigned to meet GR-63-CORE
(NEBs), GR-1089-CORE (EMC)
and NEC safety requirements
nDesigned to meet Telcordia’s
GR-487-CORE, Issue 2
requirements
The MESA® Sole Series is a compact and flexible enclosure solution for housing electronics, distribution, and battery backup equipment in outdoor telecom networks.
To provide maximum protection for your equipment investment, the MESA® Sole is
designed and tested to withstand the most severe environmental conditions. Efficient
thermal management is achieved through use of a heat exchanger cooling system
which keeps electronics from exceeding their optimal temperatures, yet never
introduces outside air and pollutants into the equipment chamber. The MESA® Sole
cabinet is extremely flexible, and a modular approach is taken wherever possible so
the cabinet can be quickly configured to meet your exact requirements.
Application
This cabinet can economically house a variety of next generation electronic equipment including telco backhaul, fiber distribution, and radio equipment for wireless
applications.
Dimensions
8.53
33.02
48.00
14.98
28.00
18.00
123000D-MESAsole / 0614
1
MESA® Sole Series Enclosures
Technical Specifications
Dimensions (continued)
Enclosure
Cabinet Access
Aerial View
Security
Environmentally sealed door to access the equipment chamber
(2) 1/4 turn fasteners secure door; padlock can be installed
on lower fastener
Mounting
Mounting Options Pad, pole, wall or H-Frame
63.5 cm (25") of unobstructed vertical mounting space.
Vertical Rack Space
Total space is 71 cm (28")
Equipped with 58 cm (23") steel equipment rails bonded
Racks
by contact to master ground bar
Accepts standard 30 cm (12") deep, center mount equipment
Center Mounting
[13 cm (5") front, 18 cm (7") rear]
Thermal Protection
Heat Exchanger
43.13
5.13
18.10
9.38
27.48
Equipped with door mounted heat exchanger, capable of
removing 650 Watts of heat at 46 °C ambient / 65 °C return
(114.8 °F ambient / 149°F return)
Equipment Chamber
Via (1) 10 cm (4") inside diameter cable cone, (1) 2.5 cm (1")
Cable Entry
grommeted opening, and (1) 2 cm (.75") opening
Equipped with an external 2-position load center to
AC Power Box
accommodate customer-supplied AC power
AC Convenience
Ground Fault Circuit Interrupter (GFCI) protected 15 A outlet
Outlet
in equipment chamber
Equipment chamber contains (2) 6-position,
Grounding
2-hole ground bars; one is isolated from frame
Optional Battery Compartment
Ventilated external battery base compartment equipped
Battery Options
with battery heater pad
Optional Customer Access Module
Mounting
Mounts on right side of cabinet
Grounding
10-position ground bar
Environmental
Sealed from outside environment by right-hand hinged door
Security
(2) 1/4 turn fasteners open using 216 hex tool
EmersonNetworkPower.com/EnergySystems (North America)
EmersonNetworkPower.eu/EnergySystems (EMEA)
47.02
Ordering Information
Emerson
Dimensions
Approx.
Part No. Description
(H x W x D)
Weight
Enclosures
F1009260 MESA® Sole backhaul cabinet 121.9 x 109.2 x 67.3 cm
96.6 kg
with customer access module
(48" x 43" x 26.5")
(213 lb.)
and battery base
83.8 x 109.2 x 67.3 cm
74.8 kg
F1009261 MESA® Sole backhaul cabinet
with customer access module
(33" x 43" x 26.5")
(165 lb.)
(no battery base)
121.9 x 83.8 x 67.3 cm
86.1 kg
F1009262 MESA® Sole backhaul cabinet
with battery base
(48" x 33" x 26.5")
(190 lb.)
(no customer access module)
83.8 x 83.8 x 67.3 cm
64.4 kg
F1009263 MESA® Sole backhaul cabinet
(no customer access module
(33" x 33" x 26.5")
(142 lb.)
or battery base)
Accessories
F1009264 MESA® Sole pole mount kit
F1009265 MESA® Sole wall mount kit
F1009266 MESA® Sole pad mount kit
(only for cabinets with battery base: F1009260 and F1009262)
F1009604 MESA® Sole H-frame kit
F1010043 MESA® Sole mounting plinth/platform
(only for cabinets without battery base: F1009261 & F1009263)
F1009300 MESA® Sole battery bracket kit for SBS batteries
F1009351 MESA® Sole mounting bracket kit for 100-pr. protection panel
in customer access module
F1009656 MESA® Sole conduit template for customer access module
F1006640 100-pr. protection panel
© Emerson Network Power, Energy Systems, North America, Inc. 2014.
Business-Critical Continuity™, Emerson Network Power™, the Emerson Network Power logo, Emerson™ and Consider it Solved are service marks and
trademarks of Emerson Electric Co. EnergyMaster ™, eSure™, NetPerform™, NetReach™, NetSpan™, NetSure™ and NetXtend™ are trademarks of Emerson
Network Power, Energy Systems, North America, Inc. Any other product, brand, or company names or logos are the property of the respective owner.
2
38.00
While every precaution has been taken to ensure accuracy and
completeness herein, Emerson Electric Co. assumes no responsibility,
and disclaims all liability, for damages resulting from use of this
information or for any errors or omissions. Specifications subject to
change without notice.
123000D-MESAsole / 0614