our new 2015 product guide

Transcription

our new 2015 product guide
Multispray................................................................................................. 41-42
Multivator Compact + Mid Range............................................................... 43-44
Multivator H/Duty Series............................................................................ 45-46
Power Box Rake Walk Behind.................................................................... 47-48
Power Box Rake Tractor Mounted Compact................................................. 49-50
Power Box Rake Tractor & Loader mounted................................................. 51-52
Rotor Rake Walk Behind.............................................................................. 53-54
Rotor Rake Compact Tractors...................................................................... 55-56
Rotor Rake Heavy Duty............................................................................... 57-58
Stump Grinder............................................................................................ 59-60
Top Dresser Pedestrian Self Propelled......................................................... 61-62
Top Dresser Tractor Mounted Towed Uni Spread.......................................... 63-64
Turfmaker Seeder ......................................................................................65-66
Turfmaker Seeder Heavy Duty ................................................................... 67-68
Aeravator........................................................................................................ 1-2
Axarator ........................................................................................................ 3-4
Bar Grader..................................................................................................... 5-6
BLECavator/Stoneburier Compact .................................................................. 7-8
BLECavator/Stoneburier Mid Range ............................................................ 9-10
BLECavator/Stoneburier H/Duty................................................................. 11-12
Box Scrapers Compact Mid Range H/Duty................................................... 13-14
Culti-pack Seeder....................................................................................... 15-16
Culti-pack Seeder Double Drive................................................................. 17-18
Disc Seeder Greens Model ........................................................................ 19-20
Disc Seeders H\Duty.................................................................................. 21-22
Dragmats ........................................................................................................23
Dropspreaders..................................................................................................24
Gravel Bander............................................................................................. 25-26
Ground Breaker 2....................................................................................... 27-28
Hand Rakes......................................................................................................29
Hydraulic Top Links.......................................................................................... 30
Landscape Rake........................................................................................ 31-32
Laser Grader Compact Range..................................................................... 33-34
Laser Grader Mid + H/Duty ........................................................................ 35-36
Multi Seeder MK1...................................................................................... 37-38
Multi Seeder MK2...................................................................................... 39-40
BLEC RESERVE THE RIGHT TO CHANGE SPECIFICATIONS
WITHOUT PRIOR NOTICE. E. & O.E.
All dimensions are width x length x height.
Notes.......................................................................................................... 69-70
Contents........................................................ Page No.
Contents......................................................... Page No.
BLEC are constantly designing and developing new innovative equipment for the future to add to their existing range of over 80 different models.
All the machinery is well engineered and built for long life and reliability, and BLEC equipment has gained a good reputation from around the world.
The Company was founded in the UK back in 1986 by Gary and Sue Mumby, and is still run by them both today.
Gary Mumby’s background as a landscape contractor was invaluable, as the hands on experience allowed him to design and develop
new innovative machinery in both the landscaping and turfcare sectors, and which is still continuing to this day
We supply equipment to over 30 countries around the world, and pride ourselves on responding quickly to customer’s requirements,
whether this be SALES - PARTS - or TECHNICAL INFORMATION which we believe is extremely important in today’s climate.
BLEC Global Ltd are manufacturers and suppliers of specialised landscaping and turfcare equipment
offering a wide range of machinery including both walk behind, and tractor mounted, to golf superintendents,
sportsfield groundsmen, municipalities, sod growers, landscape maintenance contractors etc etc.
Optional Multi Tine Shaft
Seed Box attachment
Model
Tractor hp req
Working width
Solid tine working depth
Number of tines
Tine density (approx)
Tractor pto drive
Rear roller standard
Dimensions cm W x L x H
Weight
Commodity Code 8432 2950
2
UA60
28-45
1.5m
10cm max
144
100 holes per m2
540 rpm
23cm dia
190x 170 x 115
510kg
- TECHNICAL DATA -
1
UA80
40-70
2m
10cm max
192
100 holes per m2
540rpm
23cm dia
245 x 170 x 115
560kg
FEATURES
• Legendary aeravator vibrating tine system penetrates the hardest of ground
• 3 rotors to choose from - solid tines - multi tines - slicing blades
• Special linkage frame allows turning on the move
• Optional seed hopper available
• 2 models 1.5m and 2m
The BLEC/First Products Aeravator is now available with an interchangeable rotor system
for carrying out DE-COMPACTING AERATING and SLICING operations, and with the
optional seeding system both overseeding and initial seeding works can be carried out in
one pass. The special 3 point swing linkage hitch allows turning on the move for great
versatility and high output.
BLEC/First Products AERAVATOR
Optional Roll assy
Model
Tractor hp req
Working width
Blade length
Drum diameter
Working output
Weight kg (without ballast)
Weight c/w rear roll kg
Dimensions cm WxLxH
Commodity Code 8432 2950
4
AX250
50-100hp
245cm (8’)
18cm
510cm
12,000 – 24,000 m2 (3-6 acres) per hour
1010kg
1230kg
255x145x128
- TECHNICAL DATA -
3
The BLEC Axarator is a simple cost effective Aerator capable of de-compacting large
areas quickly and efficiently. The AXE shape spiral blade design can easily penetrate hard
packed ground moving the earth from side to side leaving a fractured absorbent soil encouraging excellent root growth, for extra penetration the drum can be ballast filled
with water. An optional rear finishing roll smooths and firms up the surface, this heavy
duty aerator is designed for long life, trouble free operation and a high work rate.
FEATURES
• Multi-blade de-compactor
• High output low cost aeration
• Long life “AXE SHAPED” hardened blades
• Very little surface disturbance
• Optional Rear smoothing roller
• Designed for tractors 50 - 100hp
BLEC AXARATOR
150cm
50x75x8
CAT I
145kg
155x135x 85
Working width cm
Bar size mm
Hitch frame
Weight kg
Dimensions WxLxH cm
Hydraulic top link
Options
CAT 1
18-40
Tractor hp req
Commodity code 8432 2910
BBG150
Model
6
CAT 1 mid range
185x135x85
168kg
CAT I
50x75x8
180cm
20-50
BBG180
- TECHNICAL DATA -
5
CAT 2
245x135x85
230kg
CAT II
50x75x8
240cm
40-90
BBG240
FEATURES
• Quick change reversible hitch frame
• All models have 5 heavy duty bars
• Easy to use and maintain
• Levels and grades
• Economical cost to buy
• 3 sizes available
The BLEC Bar Graders are ideal for grading soil and stoned areas quickly and easily.
The angle iron bars are positioned to carry out grading and earthmoving in the forward
position. By simply removing the locking bar, the quick hitch frame can be positioned in
reverse so the bars back blade and smooth the surface.
BLEC BAR GRADER
18-30
100cm
24
14-56mm
Packer type with scraper bar (water ballastable)
540 pto single speed
Heavy duty friction spring type
375kg
140 x 135 x 110
Tractor hp req
Working width cm
No of blades
Adjustable screening tines gap
Rear roll
Gearbox
Clutch
Weight kg
Dimensions WxLxH cm
CAT 1
N/A
N/A
5-50gms/m2
125 litres
108kg
Hydraulic top link
Stonepicker Picking size
Collection System Extra weight
Seed Hopper - Seed rate application
Hopper capacity
Extra weight
Options
Commodity code 8432 2950
BV100
Model
8
5-50gms/m2
150 litres
129kg
Side elevator into trailer 378kg
13-100mm
CAT 1 mid range
140 x 170 x 110
455kg
14-56mm
30
130cm
25-45
BV130
- TECHNICAL DATA -
7
5-50gms/m2
175 litres
152kg
Side elevator into trailer 440kg
13-100mm
CAT 1
140 x 190 x 110
485kg
14-56mm
36
150cm
35-65
BV145
FEATURES
• Buries stones, debris and overgrowth
• Adjustable screening tines 14-56 spacing’s
• Levels Rakes Rolls in one pass
• Pulverises clods into a fine tilth
• Packer roll leaves a firm surface
• Optional quick fit attachments STONEPICKER SEED HOPPER TURF STRIPPER
• Designed for tractors 20-65hp
• Optional Vibrating Screen Now Available
The NEW BLECavator compact series has been re-designed to work more efficiently, and
is supplied standard with a quick fit attachment system offering a STONEPICKER - TURF
STRIPPER and SEED HOPPER as options to increase versatility. The well proven standard
BLECavator is a ONE PASS GROUND PREPARATOR - Cultivating and Digging down to
between 10 -18cm lifting and screening the stones and debris down to between 1450mm through the adjustable screening tines -burying the stones and debris, raking the
ground level and compacting the soil with the rear packer roll.
BLECavator (Compact Stoneburiers)
Fitted with quick fit rear attachment system
BMV180
4,000 sqm
830kg
200 x 155 x 125
Gearbox
Clutch
Max working output per hour
Weight kg
Stonepicking attachment
Hydraulic top link
Options
Commodity code 8432 2950
CAT 1
Heavy duty cam type pre-set for long life
230 x 155 x 125
540 pto single speed HD
Rear roll
Dimensions cm WxLxH
Packer type with scraper bar (water ballastable)
985kg
Adjustable 13-20-38-52mm
Screening tines gap
180cm
10
CAT 2
5,000 sq m
32
150cm
24
Working width
50-80
No of blades
BMV150
45-65
Model
Tractor hp req
- TECHNICAL DATA -
9
CAT 2
255 x 155 x 125
1200kg
6,000 sq m
40
210cm
60-90
BMV210
FEATURES
• Designed for 45-90hp tractors
• Cultivates down to 20cm
• Buries stones and overgrowth
• Screens soil between 13-50mm with interchangeable screening tines
• Heavy duty transmission with twin chain side drive
• Rear levelling blade and packer roll
• Overload heavy duty cam clutch
• Hook on rear seeder attachment available
The BLECavator mid range series are of robust construction for long life and are designed
with interchangeable hook on attachments to transform stoneburying into stonepicking,
quickly and easily. The heavy duty gearbox and duplex side chain drive are protected by
a PTO pre-set cam clutch. An optional seed hopper transforms the BLECavator into a one
pass operation.
BLECavator (Mid Range Stoneburiers)
Vibrating screen
Air seeder attachment
CAT 2
12
CAT 2
CAT 2
CAT 2
Options Hydraulic top link
BV250HD
70-95
80-110
90-130
100-150
180cm
205cm
230cm
255cm
42
48
54
60
Adjustable 13-20-38-52mm
50cm dia packer type with scraper bar (water ballastable)
Heavy duty 4 speed – 1000rpm standard (optional 540rpm – no extra cost if specified at time of order)
Heavy duty cam type pre-set for long life
5,400sqm
6,000sqm
7,000sqm
8,000sqm
1350kg
1525kg
1650kg
1750kg
235 x 200 x 130
255 x 200 x 130
285 x 200 x 130
320 x 200 x 130
BV230HD
Tractor hp req
Working width cm
No of blades
Screening tines gap
Rear roll
Gearbox
Clutch
Max working output per hour
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2950
BV200HD
BV180HD
Model
- TECHNICAL DATA -
11
CAT 2
9,000sqm
1900kg
380 x 200 x 130
120-160
305cm
72
BV300HD
• Designed for 80-200hp tractors
• Heavy Duty 4 speed gearbox with cam clutch
• Side gear drive (no chains to break)
• Adjustable screening tines 13-52mm
• Lift up rear screen for easy access to change blades
• Large dia and extra wide packer roll to eliminate ridges
• Optional Air Seeder and vibra screen for working in damp soil
The BLECavator heavy duty series are all equipped with a long life drive system, 4 speed
gearbox and side gear drive (no chains). Larger dia screening tines, easily adjustable to
achieve screening sizes of 13mm-20mm-45mm, and a curved rotor hood made from
8mm steel for strength and durability, adjustable levelling blade for accurate grading and
rear packer roll. Ballastable with water for firming up the surface. An optional vibrating
screen tine assembly allows working in heavy and damp soil by preventing clogging inbetween the tines.
FEATURES
BLECavator (Heavy Duty Stoneburiers)
Options
Hydraulic top link
Model
Tractor hp req
Working width cm
No of ripping tines
3 Point Linkage type
Cutting blades
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2950
BS60
18-30
150cm
6
CAT I
Bolt on replaceable edges
214kg
155 x 80 x 90
274kg
185 x 80 x 90
BS72
20-50
180cm
8
CAT I
14
BS80HD
50-80
200cm
6
CAT I & II
Rear hinged blades standard
520kg
200 x 100 x 100
- TECHNICAL DATA -
13
690kg
240 x 100 x 100
BS96HD
50-100
240cm
8
CAT II
980kg
300 x 140 x 125
BSROADHD
80-120
300cm
10
CAT II & III
FEATURES
• Universal landscape implement
• All models equipped with front and rear blades for moving soil/stone
• Adjustable ripping tines
• Easy to use and maintain
• Replaceable cutting blades
• Available in widths 1.5 – 3m
• Optional Wheel kit for accurate grading
• Optional Laser equipment
The BLEC Box Scrapers are a low cost easy to use landscape tool, ideal for cultivating,
levelling and clearing – a must for the contractor. Adjustable ripping tines can be raised
clear of the ground or set down to rip up the ground, the ‘box’ effect will allow soil to be
dragged forward filling in any hollows, the reverse blade will backfill or back blade very
effectively. An optional wheel kit permits accurate grading. Also ideal for grading stone/
gravel roadways. The Box Scraper can also be used as a laser grader by adding the
optional laser kit (see laser graders)
BLEC BOX SCRAPER
Working width cm
Seeding rates
Hopper capacity litres
Working output m2
Cast rings
Weight Cultipack only
Dimensions WxLxH cm Cultipack only
Weight Cultipack & power unit
Dimensions WxLxH cm Cultipack & power unit
Commodity code 8432 3019
Power required
Model
16
CP36
Honda F720
power tiller
91cm
3- 50gms per sq metre
55
5,000 per hour
Front and rear
305kg
110 x 100 x 70
420kg
110 x 180 x 120
CPI90
8-16hp for
2 wheel tractors
91cm
55
4,000 per hour
Front and rear
305kg
110 x 100 x 70
420kg
110 x 190 x 120
CP42
Honda F720
power tiller
110cm
90
7,000 per hour
Front and rear
380kg
130 x 110 x 90
535kg
130 x 180 x 120
- TECHNICAL DATA -
15
FEATURES
• Well proven seeding method
• Accurate seeding system
• Eliminates the problem of tyre marks as on tractor mounted seeders
• Seeding output of up to 5,000 m2 per hour
• Optional spacer rings for better germination
• Optional double drive models available (see next page)
• NOW AVAILABLE FOR EUROPEAN 2 WHEEL TRACTORS
The BLEC Culti Pack Seeders have a world renowned reputation for their well proven
seeding system, and now with optional spacer rings produces up to 50% better
germination. The front notched ring rollers crush lumps, making small pockets in the
soil, the grass seed is spread accurately across the full width of the rolls – not drilled in
lines, the rear set of rollers split the shallow ridges, covering up the tiny seeds in the top
12mm of soil, and surface disturbance is kept to a minimum. Now available for European
2 wheel tractors.
BLEC CULTIPACK SEEDER
18
£6,495.00
£6,795.00
Commodity code 8432 3019
Price GBP £ with Honda 9hp petrol engine
Price GBP £ with Lombardini 9hp diesel engine
£7,145.00
£7,251.00
DD36
DD42
9hp Honda Petrol or 9hp Lombardini diesel engine
91cm
110cm
3-50gms per sq metre
3-50gms per sq metre
55
90
5000m2 per hour
6000m2 per hour
Front 40cm Rear 28cm
Front 40cm Rear 28cm
475kg
568kg
200 x 130 x 140
200 x 130 x 140
Model
Power required
Working width cm
Seeding rates
Hopper capacity litres
Working output max
Cast notched ring rollers
Weight
Dimensions WxLxH cm
- TECHNICAL DATA -
17
FEATURES
• Front and rear cast ring roller drive for added traction
• Works on slopes up to 40º degrees
• Synchronised pto gearbox (no hydraulics)
• 9hp Honda petrol or 9hp Lombardini diesel engine
• Available in 36” (91cm) and 42” (110cm) widths
The BLEC Culti Pack Double Drive machine is designed for working on soft or contoured
ground where extra traction is required. The rear cast ring roller is driven from the front
power unit via a pto synchronised drive system on all forward and reverse speeds for
easy operation. The proven seeding system guarantees quick germination and growth.
BLEC CULTIPACK SEEDER – Double Drive
Model
Tractor hp required
Working width
Disc spacing
Seeder system
Seeding rates
Disc diameter
Weight
Dimensions WxLxH cm
Commodity code 8432 3019
Price GBP £ Pounds Sterling
Optional
Ballast weights 20kg each
Price GBP Pounds Sterling Optional ballast weights each
20
£55.00
£9,200.00
GDS120
30-50hp
120cm
28mm
Ground driven feed rotor through stainless steel metering seeding system
3-40gms per sq metre
20cm
545kg
145 x 110 x 100
- TECHNICAL DATA -
19
The BLEC GREENS DISC SEEDER is an efficient slit seeder for fine turf overseeding
applications. The disc spacing of only 28mm permits a one pass operation with
unparralled close slit spacing. depth control is easily controlled via front and rear smooth
rollers. The stainless steel seed metering system is ground driven via a side mounted
spider wheel for accuracy. The 3 point linkage frame makes manouverablilty easy.
FEATURES
• Close 28mm disc spacing
• Designed for fine turf overseeding ie. Golf greens - Tees - Etc
• Stainless steel seed metering system c/w hydraulic shut OFF/ON
• Seeds are accurately planted in the moisture lines for excellent germination
• For tractors 25-45hp
BLEC DISC SEEDER – Greens Model
Model
DSM14005
Tractor hp req
30-50
Working width
140cm
Disc spacing cm
5cm
Adjustable seed rate
Number of discs
26
Hopper capacity litres
200
Seeding depth
0-15mm
Max output per hour
6,000m2
Ballast weights (20kg ea) 4
Rear roll dia
325mm
Weight kg
777kg
Dimensions WxLxH cm
170 x 130 x 140
Commodity code 8432 3019
Price GBP £ Pounds
£8,325.00
DSM18005
40-70
180cm
5cm
36
250
0-15mm
10,000m2
6
325mm
1030g
210 x 130 x 140
£9,675.00
DSM14004
30-50
140cm
4cm
32
200
0-15mm
6,000m2
4
325mm
837kg
170 x 130 x 140
£9,570.00
22
£11,445.00
£11,730.00
DS2200HD5
50-80
220cm
5cm
5-40gm2
44
42
250
300
0-15mm
0-15mm
10,000m2
13,000m2
6
8
325mm
406mm
1120kg
1250kg
210 x 130 x 140
240 x 140 x 150
DSM18004
40-70
180cm
4cm
- TECHNICAL DATA -
21
£13,525.00
51
300
0-15mm
13,000m2
8
406mm
1330kg
240 x 140 x 150
DS2200HD4
50-80
220cm
4cm
£13,000.00
48
350
0-15mm
15,000m2
10
406mm
1390kg
260 x 140 x 150
DS2500HD5
65-100
250cm
5cm
£14,560.00
59
350
0-15mm
15,000m2
10
406mm
1518kg
260 x 140 x 150
DS2500HD4
65-100
250cm
4cm
FEATURES
• Close 4 or 5cm disc spacing
• Twin row disc system
• Short compact design
• Accurate seeding in moisture lines
• Spring mounted discs follow contours
• Minimal surface disturbance
• High work rate Low Maintenance
• See NEW Greens Disc Seeder on page 19
The BLEC DISC Seeder is a very efficient way of overseeding small or large areas quickly
with very little surface disturbance. Equipped with a well proven seeding system, which
can accommodate a wide range of seed mixtures from small bent seeds to large rye
grass seeds. The flow of the seed can be started or stopped ON THE MOVE at anytime by
the use of a hydraulic seed shut off assembly, operated from the double acting spool valve
on the tractor. Standard machine has twin row disc assy, accurate steel seed metering
system. Adjustable disc coulters with delivery tubes, front and rear depth control smooth
rolls (water ballastable), side seed metering wheel, and ballast weights.
BLEC DISC SEEDER
The BLEC Dragmats are ideal for incorporating materials into the
surface, the chain link design - drag and mix sand – loam –
seeds into a grass or soil surface – a quick and efficient and
economical finishing tool.
Size cm
91x120cm
183x122cm
244x153cm
300x180cm
Shipping size cm
100x29x20
185x25x25
245x30x30
306x35x35
Shipping size cm
120 x 33 x 38 cm
120 x 33 x 38 cm
130 x 45 x 70 cm
24
Commodity Code 8432 3019
Model
24H13P
36H13P
42H16
Hopper Capacity
37 litres
55 litres
90 litres
Weight kg
21kg
25kg
44kg
- TECHNICAL DATA -
Weight kg
15
25
38
60
- TECHNICAL DATA -
FEATURES
• Stainless steel seed metering system
• Ideal for seeds and some fertiliser applications
• Pneumatic wheels
• c/w spreader plate
• Available in widths
• 61cm 91cm 107cm
DROPSPREADER
23
Commodity Code 8429 2000
Model
DM3x4
DM6X4
DM8X5
DM10X6
c/w spreader bar and towchains
FEATURES
• For incorporating sand-seeds-loam into the surface
• Works well on grass and also soil areas
• Made from high grade steel for long life
• Mat does not damage a grass surface
• Easy to use
• Complete with tow spreader bar and chain
• Available in 4 widths
BLEC DRAGMATS
Price GBP £
£417.00
£476.00
£756.00
Price GBP £
£265.00
£365.00
£490.00
£670.00
Area Working Width
3 pt Linkage
Dimensions W x L x H cm
Weight
Commodity code 8432 2950
Price GB £ Pounds Sterling
Depth Control
Model
Tractor hp required
Leg Spacing
Leg Vibration
Hopper Standard (Optional)
Max Working Width
Pre Turf slitting
26
£8,054.00
BGB600
30-60hp
60cm (24”)
540 PTO driven gearbox (BLEC manufactured)
350 litres (Optional larger hopper capacity 830 litres)
Standard 25cm optional legs 30cm
Front disc assy adjustable for depth
Rear twin castor wheels (standard screw adjuster)
Optional hydraulic lift cylinder
120cm
CAT 1
110 x 150 x 120
405kg
- TECHNICAL DATA -
25
FEATURES
• Vibrating Twin Leg system
• PTO driven Vibra gearbox for long life
• Stainless steel hopper (two sizes available)
• Hydraulic hopper shut OFF / ON to each leg
• Depth control by rear steel wheels
• Drainage material max depth 25cm (optional 30cm)
• Pre turf slitting by front discs
• To suit compact and mid range tractors
• Optional hydraulic lift kit
The BLEC Twin Leg Gravel Bander has been designed to fit on compact to mid size tractors
from 30-60hp and capable of carrying out both small and larger drainage schemes. The
unique PTO driven Vibra leg system creates a smooth cutting action allowing both legs to
penetrate the ground down to 25cm and also backfilling the gravel or dry sand easily. Leg
spacing is 60cm with a band width of either 20mm or 25mm. The rear steel wheels firm
up the trenches and control the working depth by a screw adjuster.
GRAVEL BANDER
Model
Tractor hp requirement
Working width cm
Number of tines
Tine spacings
Number of blades
Max output per hour
Transmission
Overload protection
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2950
Price GB £ Pounds Sterling
Options
Rear tine frame
Price GB £ Pounds Sterling
Hydraulic top link
Price GB £ Pounds Sterling
6 tines
£610.00
CAT 1 mid range
£320.00
4 tines
£540.00
CAT 1
£235.00
28
£11,275.00
£7,450.00
£6,650.00
8 tines
£730.00
CAT 2
£384.00
1090kg
238 x 155 x 135
10 tines
£820.00
CAT 2
£384.00
£12,440.00
1185kg
288 x 155 x 135
GB20002
GB25002
65-95
80-100
200cm
250cm
8
10
26cm
26cm
24
30
3,000-4,000 sq m
7,000 – 8,000 sq m
540rpm extreme heavy duty gearbox with twin side drive duplex chain
GB10002
GB15002
28-50
44-75
100cm
150cm
4
6
26cm
26cm
12
18
2,000-3,000 sq m
2,000-3,000 sq m
540rpm heavy duty gearbox – side twin chain drive
Pre set heavy duty cam clutch
550kg
700kg
123 x 155 x 122
173 x 155 x 122
- TECHNICAL DATA -
27
FEATURES
• One Pass De-compactor
• Relieves compaction from golf greens to sports fields
• Minimum surface disturbance
• Penetrates the hardest of soils
• Economical to run and operate
• Provides continuous slits for good drainage
• 1 metre version ideal also for tree root pruning
The BLEC Groundbreaker is the answer to relieving soil compaction. This rotary decompactor will penetrate the hardest of soil conditions, with very little surface disturbance
– the concept is simple – a pto driven rotor fitted with special hardened curved wedge
shape blades slowly rotates, allowing the blades to penetrate down to between 10-26cm.
The soil is fractured laterally by the side forces created by the sequential positioning
of the blades. Mounted in between the blades are wide flat skids, which hold the turf
down preventing any heave occurring. A rear smooth roll gently firms up the surface. The
optional rear tine frame opens up the slits for sand backfilling.
BLEC GROUNDBREAKER 2
30
Hydraulic top links are one of the best
accessories you could buy for a tractor, they
allow on the move adjustment, for more
efficient working, also ideal for creating more
clearance under the implements for loading
onto trucks or trailers. Comes complete with
hoses and couplings.
FEATURES
• Allows easy adjustment from the
tractor seat
• Makes attaching implement to tractor
easy
• Available for all sizes of tractors
• Requires 1 off double acting spool
valve
BLEC HYDRAULIC TOP LINKS
29
Width
28”
28”
28”
22”
22”
25”
36”
25”
Price GBP £
Gap
1 ½”
1 ½”
1 ½”
1”
¾”
1 ½”
1 ½”
¾”
Teeth
Steel
Steel
Steel
Steel
Steel
Polypropylene
Polypropylene
Polypropylene
CAT 1
Compact Tractors
16-35hp
460mm
660mm
Fixed
10kg
£235.00
£320.00
CAT 1
Mid Range
28-55hp
475-675mm
690-890mm
Screw in
14kg
- TECHNICAL DATA -
Teeth
18
18
18
18
27
16
24
32
Commodity Code 8429 2000
Tractor size
Closed centres mm
Open centres mm
Ball ends
Weight kg
Model
Model
18E
18L
18S
18K
27L
16P
24P
32P
- TECHNICAL DATA -
FEATURES
• High quality steel and polypropylene hand rakes
• Designed for the professional contractor
• High tensile steel tooth versions
• Tough polypropylene light versions
• Models with back edges for grading and scraping
• All rakes c/w long wooden handles and support bars
HAND RAKES
£384.00
CAT 2
Heavy Duty
50-100hp
510mm
725-850mm
Screw in
20kg
Price GBP £
£35.00
£33.00
£33.00
£33.00
£33.00
£31.00
£35.00
£33.00
Model
Tractor hp req
Working width cm
Mounting
Bi-Angling
Teeth size
Depth control
Raked stone size
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2910
Price GB £ Pounds Sterling
Options
Hydraulic angling
Price GB £ Pounds Sterling
Hydraulic top link
Price GB £ Pounds Sterling
BR5
12-25
150cm
3 point hitch
140kg
155 x 120 x 75
£1,875.00
£320.00
CAT 1
£235.00
BTA26
12-18
180cm
Drawbar
Manual only
152kg
185 x 210 x 70
£2,790.00
n/a
n/a
£320.00
CAT 1
£235.00
32
£2,065.00
£395.00
CAT 2
£384.00
£2,375.00
£395.00
CAT 2
£384.00
£2,705.00
BR6
BR7
BR8
16-35
30-55
45-80
180cm
210cm
240cm
3 point hitch
3 point hitch
3 point hitch
Manual standard – optional hydraulic
All models 25mm wide x 8mm thick x 25mm gap | 16mm dia
Rear twin castor wheels c/w clamp
Minimum 25mm – Maximum 150mm
152kg
230kg
340kg
185 x 120 x 75
220 x 120 x 100
245 x 248 x 100
- TECHNICAL DATA -
31
Included
CAT 2
£384.00
£6,245.00
755kg
245 x 248 x 160
BBR8
60-100
240cm
3 point hitch
Hydraulic
FEATURES
• High tensile teeth separate soil and debris
• Easy to use and maintain
• Tractor mounted or trailed versions
• Beach Rake model available
• Accurate depth control by castor wheels
• Hydraulic or Manual angling
The BLEC Landscape Rakes are well proven easy to use, and ideal for raking and levelling
soil, stone, sand etc. The high grade steel teeth flex and allow the finer material to pass
between them, leaving a clean raked finish. By angling the rake head either manually or
hydraulically (option) stones and debris can be windrowed. Best results are obtained in
dry conditions. Accurate rake tine depth is achieved by rear castor wheels with individual
height control.
BLEC LANDSCAPE RAKE
Model
Tractor hp req
Version
Working width cm
No of ripping tines
Tyre size
Valve type
Tractor hydraulics required
Receiver pole masts
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2950
Optional self contained
system with Honda engine
Price GB £ Pounds Sterling
C/W hydraulic opening sides
Price GB £ Pounds Sterling
£6,145.00
n/a
£5,705.00
n/a
£7,035.00
34
n/a
Included
n/a
LG1500
LG1500H
30-60
30-60
Towed 50mm
Towed 50mm
150cm
150cm
6
6
23x10.5x12
23x10.5x12
Proportional
Proportional
1 single/double free flow return
2 off standard
2 off standard
450kg
470kg
155x170x110
160x170x110
LG1500TPP
3 wheel bunker rake
Towed power pack
150cm
Optional
18x9.5x8
Solenoid
n/a
2 off standard
345kg
160x150x110
£5,410.00
n/a
£6,535.00
n/a
n/a
2 off standard
552kg
185x175x115
1 off standard
220kg
155x110x90
n/a
LG1800
40-60
Towed 50mm
180cm
8
23x10.5x12
Proportional
LG1500LM
30-60
3 point linkage
150cm
4
16x6.50x8
Solenoid
- TECHNICAL DATA -
33
£7,450.00
n/a
2 off standard
575kg
190x175x115
LG1800H
40-60
Towed 50mm
180cm
8
23x10.5x12
Proportional
£5,825.00
n/a
n/a
1 off standard
315kg
185x110x90
LG1800LM
35-60
3 point linkage
180cm
5
16x6.50x8
Solenoid
FEATURES
• Models for 3 wheel bunker rakes and compact tractors
• All towed models equipped with rear 4 wheel hydraulic raise and lower frame
• Dual grading standard
• Accurate and smooth proportional valve system
• Grading to + or – 2mm
• Optional Laser control box and receiver
• Optional hydraulic opening end plates
• Optional 3 point linkage versions available
• Optional offset rear wheel frame
The compact range of BLEC Laser graders are manufactured to a high standard
using quality materials for long life, including proportional electric/hydraulic valves for
smoothness and accuracy. All models have a 4 wheel frame - with each pair of wheels
controlled by their own hydraulic cylinder for dual grading or all 4 wheels can be locked
for single grading. For the accurate levelling of sports areas, ranging from golf tees to
Sportsfields.
BLEC LASER GRADER – Compact range
Commodity code 8432 2950
Price GB £ Pounds Sterling
Dimensions WxLxH cm
£8,865.00
£9,905.00
8
7
26.5x1400-12
4.00/60-15.5
Twin Danfoss proportional
1 single or double valve and free flow return to gearbox/tank
2 off mounted either side c/w alloy inner poles
Drawbar 50mm ring
1100kg
1230kg
1380kg
215 x 410 x 110
(side plates closed)
205x410x110
235 x 210 x 120cm 245 x 450 x 120
(with drawbar folded weight 1500kg)
No of ripping tines
Tyre size
Valve type
Tractor hydraulics req
Receiver pole masts
Mounting
Weight kg
36
£11,195.00
240cm
210cm
LG2400
80-130
Working width cm
LG2100H
65-100
310cm (side plates
open)
8
LG2100
55-95
Model
Tractor hp req
£12,470.00
259 x 420 x 165
(side plates closed)
1550kg
Fixed
1490kg
£12,275.00
LG3000H
120-160
400cm (side plates
open)
9
£13,730.00
310 x 450 x 120
(side plates closed)
Drawbar 50mm ring
1700kg
310 x 450 x 120
300cm
9
LG3000
120-160
LG2400H
100-150
340cm (side plates
open)
7
- TECHNICAL DATA -
35
FEATURES
• Designed for tractors 50-150hp
• Dual grading system standard
• Quality Danfoss proportional valves as standard
• Accurate grading to + or – 3mm
• New offset 4 wheel frame for improved grading performance
• Adjustable heavy duty tines for loosening compacted ground.
• Versions available with hydraulic opening side plates for windrowing material.
• Optional laser equipment available
• Front mounted versions available
The BLEC Laser grader Mid and Heavy Duty series are designed for the contractor who
demands a quality, strong and accurate grader to cope with demanding conditions. All
models are fitted with twin Danfoss proportional valves and a rear 4 wheel new type
offset wheel frame, with each pair of wheels controlled independently for dual grading.
All graders are set up to accept any make of laser equipment, and if required BLEC can
supply a complete package with training.
BLEC LASER GRADER – Mid & Heavy Duty
Model
BMS1000
Tractor hp req
18-30
Working width cm
100cm
Adjustable seed rate
3-50 gms/m2
Hopper capacity litres
125
Max output per hour
5,000 sqm2
Weight kg
380kg
Dimensions WxLxH cm
116x130x90
Commodity code 8432 3019
Price GB £ Pounds Sterling £3,245.00
Optional rear spike roller in lieu of smooth roller
Price GB £ Pounds Sterling £545.00
Optional brush rotor (for bent seed)
Price GB £ Pounds Sterling £220.00
Optional hydraulic top link
CAT 1
Price GB £ Pounds Sterling £235.00
225
12,000sqm2
602kg
200x120x110
£4,040.00
£795.00
£270.00
CAT 1 mid range
£320.00
175
8,000 sqm2
550kg
156x130x90
£3,540.00
£670.00
£245.00
CAT 1
£235.00
38
BMS1800
35-60
180cm
BMS1400
25-45
140cm
£295.00
CAT 2
£384.00
£920.00
£4,660.00
265
18,000sqm2
830kg
230x130x95
BMS2100
45-75
210cm
- TECHNICAL DATA -
37
£320.00
CAT 2
£384.00
£1,045.00
£5,245.00
300
22,500sqm2
945kg
260x130x100
BMS2400
50-80
240cm
£375.00
CAT 2
£384.00
£1,165.00
£6,410.00
380
30,000sqm2
1220kg
320x130x100
BMS3000
60-90
300cm
FEATURES
• Front multi spike cast ring roller
• Large seed hopper with agitator rotor
• Accurate seed distribution for all seed mixes
• Hydraulic seed shut off
• Drag brush with height control
• Rear smooth roller
• Can be used for overseeding and initial seeding
• Options rear multi spike cast ring roller or Culti Pack cast ring roller
The legendary well proven BLEC Multiseeders are available in two versions – MK1 and
(MK2 – see overleaf) This MK1 type comes standard with a front multi spike cast ring
roll - seed hopper - drag brush & smooth roller. The Multi Seeder is a fast efficient way
of seeding and surface aerating with virtually no surface disturbance, the front spike
roller produces 750 ‘flower pot’ holes approximately per sq metre, and 1500 with the
optional rear spike roller fitted. Seed is then spread accurately across the full width in and
around the holes – a rear drag brush incorporates the seeds into the surface. An optional
additional drag brush can be mounted at the rear for more efficient seed incorporation.
BLEC MULTISEEDER (MK1)
Optional rear drag brush
Price GB £ Pounds Sterling
Optional brush rotor (for bent seed)
Price GB £ Pounds Sterling
Optional hyd top link
Price GB £ Pounds Sterling
Model
Tractor hp req
Working width cm
Adjustable seed rate
Hopper capacity litres
Max output per hour
3 point linkage
Weight kg
Dimensions WxLxH cm
Commodity code 8432 3019
Price GB £ Pounds Sterling
£315.00
£245.00
CAT 1 mid range
£320.00
£220.00
CAT 1
£235.00
£4,570.00
£4,080.00
£275.00
225
12,000sqm2
CAT I & II
690kg
200x130x90
175
8,000 sqm2
CAT I
565kg
160x130x90
£405.00
£5,805.00
265
18,000sqm2
CAT II
815kg
230x130x95
BMS21002
45-75
210cm
40
£270.00
£295.00
CAT 1 mid range & CAT 2 CAT 2
£320.00
£384.00 £384.00
£355.00
£5,285.00
BMS18002
35-60
180cm
BMS14002
25-45
140cm
BMS10002
18-30
100cm
3-50gms/m2
125
5,000 sqm2
CAT I
380kg
116x130x90
- TECHNICAL DATA -
39
£320.00
CAT 2
£384.00
£455.00
£6,490.00
300
22,500sqm2
CAT II
908kg
285x135x110
BMS24002
50-80
240cm
£375.00
CAT 2
£384.00
£520.00
£7,450.00
380
30,000sqm2
CAT II
1220kg
320x130x100
BMS30002
60-90
300cm
FEATURES
• Twin floating multi spike cast ring roller
• Producing 1500 holes per sq metre
• Weight transfer linkage
• Accurate seed distribution for all seed mixes
• High capacity seed hopper
• Drag brush with height adjustment
• Hydraulic seed shut off
• Optional rear drag brush
The BLEC Multiseeder MK2 is an ideal overseeder for working on both fine turf and
amenity type areas, the floating twin spike rollers follow the contours, saturating the
surface with small ‘flower pot’ holes ready to accept the seeds, which are spread
accurately via the stainless steel metering sections adjustable from 3-50 gms per m2.
A drag brush sweeps the remaining seeds into the holes, and a rear smooth roller firms
up the surface. An optional additional drag brush can be mounted at the rear for more
efficient seed incorporation.
BLEC MULTISEEDER (MK2)
15kg
£ 305.00
23kg
£345.00
64kg
£1,200.00
Optional Turf Grooming Brush
Price GB £ Pounds Sterling
Optional Turf Rake Bar
Price GB £ Pounds Sterling
Optional Seed Fertiliser Hopper
Price GB £ Pounds Sterling
42
£3,310.00
£2,550.00
15kg
£ 370.00
28kg
£385.00
75kg
£1,400.00
MT200
30-70
200cm
538kg
250 litres
225 x 80 x100
MT150
20-45
150cm
425kg
125 litres
175 x 80 x 100
Model
Tractor hp req
Working width cm
Weight kg
Capacity of Tank
Dimensions cm W x L x H
Commodity Code 8432 4010
Price GB £ Pounds Sterling
41
The BLEC Multispray is designed to apply liquid soil amendments such as gypsum,
calcium and wetting agents down through the root structure of the turf into the soil,
producing quicker and more effective results, rather than just spraying on the surface.
The optional brush and fine turf spring rake in combination with the sarel spike roller
create the maximum surface area to apply the soil amendments for greater effect. Ideal
for working on golf greens - tee boxes - and other sports turf amenity areas. Also can be
used without the spraying system as a light aeration and grooming tool.
FEATURES
• Front sarel spike ring roller penetrates and aerates the turf
• High grade steel spike rings spaced at 50mm centres (optional 30mm)
• 250 litre cylindrical spray tank and boom c/w 12v pump and agitation system
• Optional drag brush for grooming
• Optional fine spring rake bar
• Ideal for applying soil amendments
• Cost effective multi-use product
BLEC MULTISPRAY
Model
Tractor hp requirement
Working width cm
Number of blades 20cm spacings
Number of blades 10cm spacings
Working depth cm
Transmission
Depth control
Blade spacing mm
Blade thickness
Rear attachment
Tractor hydraulics required
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2910
Price GB £ Pounds Sterling
Optional Rotary Brush
Optional Seed Hopper
Optional Hydraulic Top Link CAT 1
£9,950.00
£1,995.00
£2,565.00
£320.00
£8,200.00
£1,592.00
£2,035.00
£235.00
44
£9,100.00
£1,770.00
£2,300.00
£235.00
1150kg
250 x 170 x 130
MV210
55-90
210cm
30
57
18cm
MV150
MV180
35-60
45-80
150cm
180cm
18
24
33
45
18cm
18cm
Single speed Heavy duty 540rpm gearbox c/w twin chain, side drive liquid grease filled bath)
Adjustable 4 screw jack to wide flat skid plate
200mm and / or 100mm
8mm standard – 10mm optional
Standard drag brush or optional rotary brush
1 double acting spool valve - required if fitted with optional rotary brush
590kg
765kg
170 x 80 x 110
230 x 170 x 130
- TECHNICAL DATA -
43
FEATURES
• Close 10cm and / or 20cm blade spacing
• De-compacts, Recycles and Top Dresses
• Special carbide faced blades slit and lift soil
• Depth control via flat skid frame
• Drag brush incorporates soil into the surface
• Hook on rear attachment frame
• Optional blades for de-compacting only
• Optional seed hopper
The BLEC Multivator is a unique sportsturf renovation implement carrying out decompacting and top dressing by recycling buried soil / root zone up to the surface
and incorporating back into the root structure, saving time and money from importing
materials. The specially designed blades lift the soil and leave any unwanted stones
buried for a clean finish. A rear drag brush incorporates the soil dressing into the surface.
An optional hydraulic rotary brush is available – The Multivator can also be used only as a
rotary de-compactor by fitting the optional smooth blades – leaving a clean finish. A seed
hopper is also available for a one pass overseeding operation.
BLEC MULTIVATOR – Compact & Mid Range series
Model
Tractor hp requirement
Working width cm
Number of blade flanges @ 10cm centres
Number of blades (2 per flange)
Working depth cm
Transmission
Blade spacing mm
Rear attachment (standard)
Weight
Dimensions WxLxH cm main chassis only
Commodity code 8432 2910
Price GB £ Pounds Sterling
Optional rear attachment hook on hydraulic powered rotary brush
Price GB £ Pounds Sterling
Optional Seed Hopper
Price GB £ Pounds Sterling
Optional Hydraulic Top link
Price GB £ Pounds Sterling
46
£2,080.00
CAT 2
£384.00
£12,680.00
Requires 2 spool valves
£1,960.00
MV210HD
70-100
220cm
18
36
10-18cm
Heavy duty twin chain side drive
100mm or 200mm
Dragbrush and depth smooth roll
1375kg
248 x 238 x 137
- TECHNICAL DATA -
45
£384.00
£2,335.00
£2,200.00
£14,000.00
1578kg
MV240HD
90-125
240cm
20
40
10-18cm
FEATURES
• Heavy Duty twin side drive transmission
• Close blade spacing standard 10cm - 20cm
• Special carbide faced blades slit and lift soil
• Produces up to 1000kg of re-cycled soil per 100sq metre
• Quick hitch attachment frame
• Blade digging depth 10 -18cm
• Optional hydraulic powered brush
• Optional smooth blades for de-compacting
• Optional seed hopper
• To suit tractors 70-125hp
The heavy duty BLEC Multivator is designed for the contractor who requires a long life
high production machine for both de-compacting and re-cycling buried organic soil up to
the surface and leaving unwanted stones still buried. The optional large powerful
hydraulic brush (reversible) incorporates the soil leaving a surface ready to play. As an
option smooth blades can be fitted for de-compacting only.
BLEC MULTIVATOR – Heavy Duty Series
Model
Working width cm
Power Req.
Rotor Angling
Rotor Teeth
Transmission
Depth Control
Quick Hitch for
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2910
Price GB £ Pounds Sterling
Price Excludes Power Units
Rotor System
Dimensions WxLxH cm with a BCS
Weight with BCS
48
Quick detachable for fitting optional – tined – spring – brush rotors
170 x 115 x 110
170 x 115 x 110
175kg
188kg
185 x 115 x 110
200kg
£2,375.00
£1,880.00
£2,145.00
100kg
110 x 80 x 50
PBR100
100cm
10-16hp
PBR60
PBR80
60cm
80cm
6–10hp
8–14hp
Manual – bi-angling
Long life Carbide
Shaft drive to heavy duty gearbox to side chain drive
Adjustable screw jack castor wheels and tyres with long life bearings
BCS - AGRIA - BERTOLINI - FORT - GRILLO - SEP - CAMON - FERRARI - RAPID
75kg
88kg
75 x 80 x 50
95 x 80 x 50
- TECHNICAL DATA -
47
FEATURES
• Cultivates, earth moves, grades and rakes in one pass
• Long life carbide tooth rotor
• Rotor pulverises the soil and seperates the stones / debris
• Castor wheels for accurate depth control
• Fold down side plates for soil / stone moving
• Bi-angling rotor for windrowing debris
• Adjustable barrier blade
• 3 models 60cm – 80cm – 100cm w/widths
The BLEC POWER BOX RAKE is a multi-use quick fit attachment to suit the majority of
European 2 wheel tractors 6-18hp. The powerful contra rotating carbide tooth rotor can
penetrate hard ground producing up to 75mm of soil pulverising, levelling and grading.
The bi-angling rotor allows stones and debris to be windrowed to the side and by folding
down the side end plates excess material can be easily collected up into a pile. The power
box rake has a quick removable rotor system for optional rotors.
BLEC POWER BOX RAKE (Walk Behind)
For European 2 wheel tractors
Model
Tractor hp req
Working rotor width cm
Max working output/hr
Rotor Bi-angling
Max working depth
Rotor teeth
Depth control
Stone removable size
Weight kg
Dimensions W x L x H cm
Commodity code 8432 2910
Price GB £ Pounds Sterling
Optional hyd top link
Price GB £ Pounds Sterling
Optional Laser Kit
Price GB £ Pounds Sterling
50
£4,705.00
CAT 1
£235.00
Single grade
POA
£5,105.00
CAT 1
£235.00
Single grade
POA
PBR120
PBR145
18-25
22-40
120cm
145cm
7,000m2
8,000m2
Hydraulic
10cm
10cm
Carbide
Screw adjuster link bar or optional hydraulic cylinder
Min 15mm
Min 15mm
325kg
385kg
165 x 120 x 120
200 x 145 x 120
- TECHNICAL DATA -
49
FEATURES
• Long life pointed carbide toothed rotor
• Rotor pulverises the soil and separates the stones / debris
• Fold down end plates allow PBR to bulk move soil / debris
• Hydraulic angling rotor rakes and windrows material
• Rear adjustable castor wheels gives accurate depth control
• Lift up rear frame
• Optional Laser Control Kit available
• Quick change rotor for optional rotors
The tractor mounted BLEC Power Box Rake is the perfect landscape construction tool
for carrying out cultivating – earth moving – grading and raking. At the heart of the
unit is a carbide pointed tooth rotor which contra rotates, pulverising and separating the
debris from the soil, leaving a clean raked finish. The hydraulic bi-angling rotor windrows
unwanted stones and debris and by folding down the side plates all the raked material
can be gathered up. An optional laser kit can be fitted for accurate levelling and raking
on sportsturf areas.
BLEC Power Box Rakes (Tractor Mounted Compact)
Model
Engine/Tractor hp req
Working rotor width cm
Max working output/hr
Rotor Bi-angling
Max working depth
Rotor teeth
Depth control
Drive system
Min hydraulic oil flow req
Weight kg
Dimensions WxLxH cm
Commodity Code 8432 2910
Price GB £ Pounds Sterling
Optional hyd top link
Price GB £ Pounds Sterling
Optional Laser Kit
Price GB £ Pounds Sterling
n/a
£4,310.00
n/a
£4,780.00
PBRH120
PBRH150
20-40
30-60
120cm
150cm
4,000m²
6,000m²
Manual / Optional Hydraulic
10cm
Carbide
Rear Castor wheels
Hydraulic motor
35 litres per minute
55 litres per minute
265kg
350kg
140 x 110 x 85
170 x 120 x 90
PBR180
30-60
180cm
8,000m²
52
£6,615.00
CAT 1
£235.00
Single grade
POA
£7,485.00
CAT 1 mid range
£320.00
Single grade
POA
PTO Gearbox 540rpm
n/a
405kg
510kg
165 x 120 x 120
200 x 145 x 120
PBR150
20-40
150cm
7,000m²
Hydraulic
- TECHNICAL DATA -
51
£8,240.00
CAT 1 mid range & CAT 2
£320.00
£384.00
Dual grade
POA
660kg
240 x 145 x 120
PBR210
45-90
210cm
9,000m²
£8,945.00
CAT 2
£384.00
Dual grade
POA
780kg
245 x 165 x 120
15cm
PBR240
50-100hp
235cm
10,000m²
FEATURES
• Long life pointed carbide toothed rotor
• Rotor pulverises the soil and separates the stones / debris
• Fold down end plates allow PBR to bulk move soil / debris
• Hydraulic angling rotor rakes and windrows material
• Rear adjustable castor wheels gives accurate depth control
• Lift up rear frame
• Optional Laser Control Kit available
• Quick change rotor for optional rotors
The tractor mounted BLEC Power Box Rake is the perfect landscape construction tool
for carrying out cultivating – earth moving – grading and raking. At the heart of the
unit is a carbide pointed tooth rotor which contra rotates, pulverising and separating the
debris from the soil, leaving a clean raked finish. The hydraulic bi-angling rotor windrows
unwanted stones and debris and by folding down the side plates all the raked material
can be gathered up. An optional laser kit can be fitted for accurate levelling and raking
on sportsturf areas.
BLEC POWER BOX RAKES (Tractor & Loader Mounted)
Model
Power units
Rake drive
Rake teeth
Rotor angling
Depth control
Pair wide wheels
Working width
Weight kg without Honda
Dimensions cm WxLxH without Honda
Weight kg with Honda F720
Dimensions cm with Honda F720
Commodity code 8432 2910
Price without Honda
Price with Honda F720
Optional spring tine rotor
Price GB £ Pounds Sterling
Optional rotary brush
Price GB £ Pounds Sterling
54
£460.00
£750.00
£3,830.00
£6,035.00
SR3H
Honda F720 (6hp) petrol engine
Pto hydraulic system – includes tank-filter-motor
Welded long life high grade steel
Hydraulic bi-angling
Rear screw jack castor wheels
included
91cm
143kg
110x100x100
283kg
110 x 200 x 120
- TECHNICAL DATA -
53
FEATURES
• Easily transported through 75cm opening
• Levels, Grades and Rakes accurately
• Windrows stones and debris – leaving a clean tilth
• Hydraulically powered system for long life
• Greatly reduces the need for costly handraking
• Optional rotors available
The popular BLEC Rotor Rake is designed to attach onto either the Honda F720 models.
The working principle is simple; a contra rotating rotor fitted with high grade steel teeth
penetrates the soil forking out stones and debris, and by hydraulically angling the rotor
either to the left or right unwanted material can be windrowed away from the finished
area. Turning is made easy by steering clutches fitted to the Honda power unit. The
hydraulic powered system ensures long and trouble free working. The rotor frame can be
easily detached for transport through a 75cm opening.
BLEC ROTOR RAKE – Honda Power Tiller Models
CAT 1
£235.00
Optional hydraulic top link
Price GB £ Pounds Sterling
56
£5,745.00
£5,200.00
CAT 1 mid range
£320.00
SR6H
30-60
200cm
Fixed
Hydraulic
7,000m2
50mm
20mm
345kg
228x150x100
SR5H
16-30
152cm
Fixed
Hydraulic
5,000m2
50mm
20mm
290kg
176x110x96
Model
Tractor hp required
Working width cm
Rotor system
Bi Angling
Max work output per hour
Max working depth mm
Raked stone size down to mm
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2910
Price GB £ Pounds Sterling
- TECHNICAL DATA -
55
FEATURES
• Accurate raking and levelling in one pass
• Bi-angling rotor windrows stones and debris
• Works on a wide range of ground conditions
• Detachable rotor system allows quick fitment of optional rotors and rotary brush
• Front rake tine bar
• Models to suit tractors from 15-100hp
The BLEC Rotor Rake is an ideal implement for preparing the soil for either seeding or
turfing – the working principle is simple – A heavy duty rotor is fitted with high quality
teeth mounted in a spiral sequence – the rotor contra rotates the teeth penetrate the soil
up to 50mm and separate the stones and debris from the soil into a windrow to the side,
and by working in a uniform way large areas can be raked off quickly and easily. Depth
adjustment is via the rear castor wheel screw jacks.
BLEC ROTOR RAKE – For Compact Tractors
£9,375.00
£8,730.00
Add price below
£1,215.00
CAT 1 mid range & CAT 2
£320.00
£384.00
Options Bolt on long tine rotor enabling raking down to 10cm
Price GB £ Pounds Sterling
Optional hydraulic top link
Price GB £ Pounds Sterling
58
1340kg
420x205x130
1050kg
320x205x130
Add price below
£1,415.00
CAT 2
£384.00
14,000m2
12,000m2
Add price below
£1,770.00
CAT 2
£384.00
£10,520.00
SR12H
80+
400cm
SR10H
55-90
300cm
SR8H
50-85
250cm
Fixed
Hydraulic
10,000m2
50mm
20mm
850kg
270x205x130
Model
Tractor hp required
Working width cm
Rotor system
Bi Angling
Max work output per hour
Max working depth mm
Raked stone size down to mm
Weight kg
Dimensions WxLxH cm
Commodity code 8432 2910
Price GB £ Pounds Sterling
- TECHNICAL DATA -
57
FEATURES
• Large diameter rotor for heavy working
• Optional fine tooth or long tine rotors
• Duplex chain drive with overload clutch
• Special wide angle pto shaft drive
The larger BLEC Rotor Rakes are available with either the multi-tine fine tooth rotor for
raking stones off down to 20mm size or the alternative bolt on long tine for deeper
raking down to 10cm and removing stones from 25mm and larger. All rakes are fitted
with a hydraulic bi-angling rotor with duplex chain drive, overload clutch and heavy duty
gearboxes. The working principle is simple but effective – a contra rotating rotor fitted
with high grade teeth positioned in a spiral sequence forking out unwanted stones and
debris to the front and by angling the rotor all debris is moved to the side, leaving a clean
raked finish.
BLEC ROTOR RAKE – Heavy Duty
Model
Tractor hp req
Hydraulic valve req
Grinding wheel swing distance
Grinding wheel diameter
Number of finger teeth
Cutting depth below ground
Weight kg
Dimensions cm W x L x H
Commodity code 8436 8010
Price GB £ Pounds Sterling
£5,480.00
£4,995.00
60
SG36
40-80
2 Double acting
100cm
91cm
42
30cm
420kg
110 x 200 x 115cm
SG100
20 – 45hp
Yes – 1 single or double acting
110cm
35cm
8
25cm
325kg
90 x 145 x 105
- TECHNICAL DATA -
59
• Powerful PTO driven grinding wheel
• Tractor 3 pint linkage mounted
• 2 models to choose from
• Hydraulic lift and swing for easy cutting
• Replaceable cutting teeth
The BLEC Stumpgrinders easily attach to tractors from 20-80hp, and are user friendly. A
great alternative to the walk behind vibration prone machines. Both models are fitted with
powerful grinding wheels to tackle both small and large stumps with ease - both have a
wide cutting swing of over 1m making large stumps easy to remove. The model SG100 is
fitted with rubber curtains to help protect the operator on uncabbed tractors.
BLEC STUMP GRINDER
FEATURES
Model
Version
Hopper capacity
Spreading width
Drive system
Overall dimensions WxLxH
Weight kg
Power requirement
Commodity Code 8432 3019
Price GB £ Pounds Sterling
£4,100.00
£4,950.00
62
320TMSP
Towed
0.8m3
180cm (72”)
Towed hydraulic tractor supply
150 x 310 x 100cm
350kg
20-50hp
100SPMSP
Self propelled
0.3m3
76cm (30”)
Briggs 10.5hp/Hydrostatic transmission
91 x 250 x 100cm
320kg
N/A
- TECHNICAL DATA -
61
FEATURES
• Both walk behind and towed versions available
• Low cost - robust - easy to use spreaders
• Spreads both damp and dry materials
• Pedestrian version is self propelled hydrostatic drive
• Towed version has hydraulic driven belt conveyor
The BLEC Multi-Spread Top Dressers are an economical easy to use spreader for applying sand, loams and
compost, both models have a conveyor belt moving floor and full width spinning brush system. Material
spreading rates are easy to control via the rear adjustable gate.
BLEC TOPDRESSER – (Multi-Spread)
£395.00
CAT 1
£320.00
Optional drawbar
Price GB £ Pounds Sterling
Optional hydraulic top link
Price GB £ Pounds Sterling
64
£6,035.00
£5,255.00
£420.00
CAT 1 mid range & CAT 2
£320.00
£384.00
7
5-30kg per m2
770kg
235 x 150 x 130
5
5-30kg per m2
635kg
175 x 150 x 130
£460.00
CAT 2
£384.00
£6,865.00
SLTD200
60-100
200cm
1120
SLTD150
35-60
150cm
840
SLTD100
30-50
100cm
580
2 double acting spool valves
4
5-30kg per m2
510kg
103 x 150 x 130
Model
Tractor hp req
Working width
Hopper capacity litres
Hydraulics required
Tyres 18 x 950 – 8
Spreading rate
Weight kg
Dimensions cm WxLxH
Commodity Code 8432 3019
Price GB £ Pounds Sterling
- TECHNICAL DATA -
63
The BLEC Unispread self loading topdresser is a quick and economical system of
spreading sand or loam onto sports areas. The large capacity bucket is hydraulically
raised and lowered. A wheel transfer frame then spreads the weight to the low ground
pressure tyres when spreading and transporting. A variable speed hydraulic feed drum
with an automatic opening gate - allows accurate spreading across the full width of the
bucket of up to 100 tons per day on larger models.
FEATURES
• Self loading top dresser
• Hydraulically driven feed drum
• Spreads both damp and dry materials
• Wheel transfer frame
• Automatic shut OFF/ON gate
• Only 1 person and 1 tractor operation
BLEC TOPDRESSER (Uni Spread)
Model
Tractor hp req
Working width cm
Seed rates gms/m²
Hopper capacity litres
Max output per hour
Cast notched ring dia cm
Weight kg
Dimensions cm WxLxH
Commodity Code 8432 3019
Price GB £ Pounds Sterling
Options
Set of spacer rings for rear roll weight
Price GB £ Pounds Sterling
630kg
220 x 100 x 120
520kg
175 x 100 x 120
£4,580.00
60kg
£620.00
£4,080.00
45kg
£565.00
66
225
5 acres
175
4 acres
75kg
£670.00
£5,205.00
BTM6
30-50
180cm
BTM5
18-35
140cm
BTM4
15-25
100cm
5-50gm2
125
3 acres
28cm front 28cm rear
435kg
135 x 100 x 120
- TECHNICAL DATA -
65
110kg
£730.00
£5,785.00
720kg
240 x 100 x 120
265
6 acres
BTM7
35-70
210cm
130kg
£835.00
£6,245.00
840kg
260 x 100 x 120
300
7 acres
BTM8
40-90
240cm
FEATURES
• Well proven method of seeding
• Accurate seeding – infinite adjustable 5-50gms/m2
• Stainless steel seed metering system
• Hydraulic seed shut off / on
• Heavy duty 3 point linkage frame
• Spacer rings available to allow better germination of seeds
The BLEC Turfmaker seeders are based on a proven method of seed incorporation.
The front notched ring rollers crush lumps, level the soil to create a firm surface also
producing small pockets in the soil, ready to accept the grass seed, which is spread the
full width of the worked area (not drilled into lines) The rear set of rollers split the shallow
ridges formed by the front rollers – incorporating the seeds evenly in the top 12mm soil,
and surface disturbance is kept to a minimum. BLEC recommend the fitting of spacer
rings, which increases germination of up to 50%.
BLEC TURFMAKER SEEDER – Standard
Model
Tractor hp req
Working width cm
Seed rates gms/m²
Hopper capacity litres
Max output per hour
Cast notched ring dia cm
Weight kg
Dimensions cm WxLxH
Commodity Code 8432 3019
Price GB £ Pounds Sterling
Walk board included
Optional Drawbar to tow seeder
Optional Set of spacer rings for front roll weight
Price GB £ Pounds Sterling
Optional Set of spacer rings for rear roll weight
Price GB £ Pounds Sterling
Optional hydraulic top link
Price GB £ Pounds Sterling
£9,365.00
£545.00
140Kg
£1,545.00
96kg
£1,085.00
CAT 2
£384.00
£8,530.00
£545.00
110Kg
£1,250.00
74kg
£920.00
CAT 2
£384.00
68
1410kg
425 x 130 x 140
1183kg
340 x 130 x 140
£545.00
176Kg
£1,790.00
118kg
£1,335.00
CAT 2
£384.00
£10,695.00
TM12HD
70+
390cm
5-50gm2
1100
10 acres
TM10HD
60+
305cm
5-50gm2
950
9 acres
TM8HD
50+
244cm
5-50gm2
800
7 acres
40cm front / 28cm rear
985kg
290 x 130 x 140
- TECHNICAL DATA -
67
FEATURES
• Large diameter front cast ring roller for higher travelling speed
• High capacity seed hopper
• Stainless steel seed metering system
• Hydraulic seed shut off from tractor
• Front full width rake tine bar
• Heavy duty construction
• High seeding output of up to 10acres per hour
• Optional spacer rings
The heavy duty range of BLEC Turfmaker seeders consists of 3 working width 2.4m – 3m
– 4m for tractors 50 -150hp all models are of robust construction for long life and are
fitted with large front cast ring rollers permitting a higher travelling speed. The optional
spacer rings positioned in between the cast rings increase seed incorporation and
germination by 50% an ideal seeder for Turfgrowers, Golf course builders and Sportsfield
constructors.
BLEC TURFMAKER SEEDER – Heavy Duty series
70
- NOTES -
69
- NOTES -
72
- NOTES -
71
- NOTES -