Pumps • Switches • Solenoids

E0602
Pumps • Switches • Solenoids
Fuel Pumps
High Pressure
Flow Switches
Oil Burner Pumps from Suntec.
Suitable for use with kerosene, No. 1
or No. 2 Fuel Oil. (Waste Oil Pumps
also available). Pumps are designed
to be gravity fed fuel oil from your
holding tank and to then pressurize
the fuel to a nozzle.
Single-stage pumps are for medium
lift applications and can be mounted
in any position. Two-stage pumps
are for high lift, long run applications
and can be mounted in any position
except upside-down. All pumps
are factory set at 100 PSI but are
adjustable from 100-150 PSI.
D
4’ Cord
ST5 Flow Switch (Medium Flow). Rated from 1 to 8 GPM. Vertical mount only.
Rated to 4400 PSI. Brass/plastic construction. Maximum temperature is 176° F. 3/8”
FPT ports. 250 Volt, 3 Amp. 47” Cord.
ST5H Flow Switch (High Flow). Rated from 1 to 16 GPM. Mounts in any position. Rated to 3100 PSI. Brass/plastic construction.
Maximum temperature is 176° F. 3/8”
FPT ports. 250 Volt, 3 Amp. 47” Cord.
D
ST505 Flow Switch (Medium
Flow - High Pressure). Rated
from 1 to 8 GPM. Vertical mount
only. Rated to 7300 PSI. Stainless/
plastic construction. Maximum
ST6
temperature is 176° F. 3/8” FPT
ports. 250 Volt, 3 Amp. 47” Cord.
D
No. A2VA-7116
Available in 1725 RPM or 3450 RPM
models. * Shaft rotation and nozzle
port location is either RH or LH as
viewed from the shaft end.
ST6 Flow Switch (Medium Flow).
Rated from 1 to 8 GPM. Mounts in any
position. Rated to 4500 PSI. Brass
construction. Maximum temperature is
176° F. 3/8” MPT inlet and outlet with 1/4”
FPT gauge port. 250 Volt, 3 Amp. 47’ Cord.
Many Other Models
Available!
D
ST5 / ST5H /
ST505
Part No. Max. Flow Max. PSI Net Ea.
NP ST5
8 GPM
NP ST5H 16 GPM
NP ST505 8 GPM
NP ST6
8 GPM
4400 $ 28.70
3100
60.95
7300
88.35
4500
29.80
Flow Switches
FS8
Model FS8 Flow Switch is rated to 3600 PSI
and up to 8 GPM. Electrical ratings to 230 volt,
3 amp. Ports are 3/8" MPT. Must be mounted in
vertical position to function properly. Maximum
temperatures to 175° F.
No. J4NB-A1000G
* Rotation &
Rated
Part No.
RPM Nozzle Port
PSI
SD A2VA-7116
3450
SD A1YA-7912 1725
SD J4NB-A1000G1725
SD B2TA-8249 3450
SD B2YA-8916 3450
SD A2YA-7916 3450
RH/RH
RH/RH
RH/LH
RH/RH
RH/RH
RH/RH
GPH
Net Ea.
150/200 3/2 $ 63.50
100/1507/3101.00
80
24 219.50
150/30018/16152.00
150/2007/3146.50
150/2007/3108.00
Model 100975 Flow switch is rated to 12 gpm and
5000 psi. Can be mounted in any direction. (3)
magnet design means shuttle will not stick. Rated
to 5 amp and 250 volt. Ports are 3/8" FPT. Maximum
temperatures to 180° F.
* As viewed from shaft end.
Fuel Solenoids
Suntec Solenoid Shutoff Valves for
use with Kerosene No. 1 or No. 2 fuel
oil. Available in 24V, 115V or 220V.
All shown are Non-Delay opening
response. Standard with 19" lead
wires. "R" Series are pump mount
style. "C" Series are burner mount.
Rated to 300 PSI.
D
Part No.
Voltage
Mount
Net Ea.
SD R261NL24AC/12DC Pump $ 43.80
SD C261NR24AC/12DC Burner
40.30
SD R642NL115 Pump38.60
SD C642NR115 Burner36.75
SD R753NL220 Pump38.35
SD C753NR220 Burner36.70
SD PVR38
Oil Safety Valve.............
66.25
Part No.
Vacuum Rating
Net Ea.
HY 2510-1
HY 2510-7
HY 2510-17
1-1/2" Hg vac
2-1/2" Hg vac
3-1/2" Hg vac
$ 16.95
16.95
16.95
100975
D
Model 100879 and 100904 Flow Switches feature
micro-switch technology which eliminates the reed
switch. Valves activate on as little as 1/2 gpm flow.
Maximum flows to 10 gpm. Valves can be mounted
in any position. Rated to 4000 psi, 250 volts and 180°
F. Switch rating is 5 amps. Ports are 3/8" FPT. Model
100879 has a "pilot" feature for use with gravity feed
systems. Model 100904 is for pressure feed systems
and does not have the pilot feature.
Model 103011 and 100329 are designed to provide
on/off switching for systems that require stop/start
capability. Operating range is .75 to 18 GPM. Rated
for 3 amp up to 250 volt. Maximum temperatures to
165° F. Construction is brass body with stainless and
Buna internals. Ports are 3/8". 103011 is designed for
pressure feed systems. 100329 has a “pilot feature”
for gravity feed systems.
Max. Min.Max.
Part No.
Pressure
Flow
Flow
IP FS8
3600 PSI 1.0 GPM
8 GPM
IP 100904 4000 PSI
.5 GPM 10 GPM
IP 100879 * 4000 PSI
.5 GPM 10 GPM
IP 100975 5000 PSI 1.25 GPM 12 GPM
IP 103011 4000 PSI .75 GPM 18 GPM
IP 100329 * 5000 PSI
.5 GPM 16 GPM
* Best for Prep Units.
Vacuum Switches
Vacuum Switches protect pumps from
running dry by automatically shutting
off motors when liquid is depleted or
vacuum drops to a specific level. Rated
for 110 volt or 220 volt up to 16 amps.
Three Hg Vac. ratings to choose from. Rated
to 140° F. Inlet port is 1/4" FPT.
D
100879
D
103011
D
Net Ea.
$ 36.15
83.85
95.10
35.75
137.50
141.50
100329
D
Pressure Switches
D
DULTMEIER SALES • OMAHA, NE
D
ActuationAmp
Part No.
Ports
Pressure Rating Net Ea.
GU 23180 1/4" MPT 360 PSI
5 amp $ 15.75
GU 23181 1/4" MPT 580 PSI
5 amp 16.10
GU 23175 1/4" MPT 580 PSI 15 amp 23.10
GU 23178 3/8" MPT 360 PSI 15 amp 26.25
1/4” Inlet
(800) 228-9666
Designed to be used for Normally “on” or Normally
“off” applications. Switches are rated to 250 volts
and 5 or 15 amps as noted. Ports are either 1/4" MPT
or 3/8" MPT. Rated to 3600 PSI and 194° F.
•
www.dultmeier.com
• DAVENPORT, IA
(800) 553-6975
E0602