Atmel | SMART SAM S70 and E70 Series

Transcription

Atmel | SMART SAM S70 and E70 Series
Atmel | SMART SAM S70
and E70 Series
Industry’s Highest Performing ARM Cortex-M
Processor based MCU Series
The Atmel® | SMART SAM S70 series is based on the ARM® Cortex®-M7 core plus floating-point unit (FPU) extending the
Atmel microcontroller portfolio with maximum operating speeds of up to 300MHz, 2MB of Flash and up to 384KB of
multiport SRAM of which up to 256KB can be assigned to tightly coupled memory (data and instructions) delivering a zero
wait state at 300MHz. The SAM S70 is able to accelerate execution from on-chip FLASH and NVM connected to Quad-SPI
and EBI with 16KB of data and 16KB of instruction cache memory. This unique memory architecture enables the SAM S70
to be optimized for real-time deterministic code execution and low-latency peripheral data access. Additionally, the SAM
S70 includes an extensive peripheral set including high-speed USB host and device with high-speed PHY, up to 8 UARTs,
5 SPI, 3 I2C, I2S, SD/MMC interface, a CMOS camera interface, 12 16-bit timers, 8 16-bits PWMs and analog interfaces.
The Atmel | SMART SAM E70 series includes similar features as the SAM S70 as well as a 10/100 Ethernet MAC and dual
Bosch CAN-FD interfaces with advanced analog features making them ideal for connectivity applications.
Key Features
• ARM Cortex-M7 core running at 300MHz
• FPU for high-precision computing and accelerated
data processing
• High-performance internal-memory architecture
•
•
•
•
•
•
•
•
•
•
with user configurable tightly coupled memories
and system memory, and 16kB I and 16kB D cache
Dual Bosch CAN-FD controller
10/100 Ethernet MAC with IEEE1588
Quad-SPI with eXecute-In-Place
High-speed USB host and device with on-chip
high-speed PHY
CMOS image sensor interface
AES hardware-encryption engines, TRNG and
SHA-based memory integrity checker
Advanced analog front end based on dual 2Msps,
12-bit ADCs, including 16-bit average, with up to
24 channels, offset error correction and gain control
Dual 2Msps, 12-bit DAC and analog comparator
64- to 144-pin package options
Extended industrial temperature rangefrom
-40°C to 105°C
To evaluate and prototype your application, Atmel
provides an evaluation kit: ATSAMV71-XULT.
This kits offers flexibility with extensions compatible
with Atmel wings and Arduino shields.
SAM S70 and E70 Series
Industry’s Highest Performing ARM
Cortex-M Processor based MCU Series
SAMS70 and SAME70 selector guide
Flash (Kbytes)
Pin Count
CAN-FD
Ethernet
Temp. Range
(deg. C)
Package
ATSAME70J19
512
64
Yes
Yes
-40 to 105
QFP
ATSAME70J20
1024
64
Yes
Yes
-40 to 105
QFP
Device Name
SAM E70 series
ATSAME70J21
2048
64
Yes
Yes
-40 to 105
QFP
ATSAME70N19
512
100
Yes
Yes
-40 to 105
QFP, BGA
ATSAME70N20
1024
100
Yes
Yes
-40 to 105
QFP, BGA
ATSAME70N21
2048
100
Yes
Yes
-40 to 105
QFP, BGA
ATSAME70Q19
512
144
Yes
Yes
-40 to 105
QFP, BGA
ATSAME70Q20
1024
144
Yes
Yes
-40 to 105
QFP, BGA
ATSAME70Q21
2048
144
Yes
Yes
-40 to 105
QFP, BGA
ATSAMS70J19
512
64
No
No
-40 to 105
QFP
ATSAMS70J20
1024
64
No
No
-40 to 105
QFP
SAM S70 series
ATSAMS70J21
2048
64
No
No
-40 to 105
QFP
ATSAMS70N19
512
100
No
No
-40 to 105
QFP, BGA
ATSAMS70N20
1024
100
No
No
-40 to 105
QFP, BGA
ATSAMS70N21
2048
100
No
No
-40 to 105
QFP, BGA
ATSAMS70Q19
512
144
No
No
-40 to 105
QFP, BGA
ATSAMS70Q20
1024
144
No
No
-40 to 105
QFP, BGA
ATSAMS70Q21
2048
144
No
No
-40 to 105
QFP, BGA
Atmel Corporation
1600 Technology Drive, San Jose, CA 95110 USA
T : (+1)(408) 441. 0311
F : (+1)(408) 436. 4200
|
www.atmel.com
© 2015 Atmel Corporation. / Rev.: Atmel-45131A-SAM-S70-E70_E_A4_022015
Atmel,® Atmel logo and combinations thereof, Enabling Unlimited Possibilities,® and others are registered trademarks or trademarks of Atmel Corporation in U. S. and other
countries. Other terms and product names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE
THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to
make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall
not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.