Yamaha YG100RA YG100RB

• High-speed mounting capacity handling
24,000CPH (O.15sec/CHIP Equivalent: optimum condition)
• +/-50tlm (CHIP), +/-30tlm (QFP) mounting
absolute accuracy in full time operation.
• Handles a wide range of components from
0402 chips to D45mm components and with
long connectors.
• Capable of handling 15mm height components.
• Applicable to longer length PCB (up to
L510mm).
Index mechanism
replaces nozzles
during movement.
This allows cutting
machine idle loss
time.
(FNC : flying nozzle change)
Large diameter
nozzle, gripper
nozzle or customized nozzles allow
high-precision
mounting of large
fine-pitch QFP and
odd-shaped
connectors, etc.
'I'
fit
ANC station
Automatically replaces
customized nozzles.
Note
The photo shows the state
with various options installed.
• YG1 00 RA/YG 1 OORB specifications
YG1 OORA
(FNC type)
(Model:
I YG1 OORB
KHW-OOO)
I 1-
I
(SF type)
Applicable PCB
L510 x W440mm to L50 x W50mm <Note 1> <Note 2>
Through-put (Optimum)
24,000CPH (O.15sec/CHIP Equivalent)
Mounting accuracy
Absolute accuracy (11+30) : +/-0.05mm/CHIP, +/-0.05mm/QFP
~
~~
N.c
'ViI.)
0402 (Metric base) to D45mm components, SOP/SOJ, QFP, connnector, PLCC, CSP/BGA,
<D g~
long connnector<Note 3> <Note 4> <Note 5>
Height of compoonents which can be mounted: 15mm or less <Note 6>
Power supply
3-Phase AC 200/208/220/240/380/400/416V
Air supply source
0.55MPa or more, in clean, dry states
External dimension
L1,650 x W1 ,562 (End of cover) x H1,470mm (cover top)
L1,650 x W1 ,615 (End of guide for feeder carriage) x H1,470mm (cover top)
Weight
Approx. 1,630kg (Main unit only)
<Note 2> For information
on"
with sATS
Longer length PCB spec." and"
components
<Note 4> In case of the 045 type multi-camera,
the applicable
components
please consult
and large sized components,
does not include the projection.
__
; - - C;pia~;rity-Cl=;c~e
us separately.
:
0402 to 0 31 mm Components.
range is from 0603 to 0 45mm Components.
sOP.....,..
",.
range is from
about the eccentric
:
offset values and the rotation angle,
is required for YG 1OORA.
~P
TSOP
I
I
us separately.
<Note 6> 4mm or less height of upper face of PCB before transport
<Note 7> This dimension
,
2 stages push-up spec.", please consult
the applicable
long connectors
YCiU
031 type multi-camera
I wATS I dYTF etc.
<Note 3> tn case of the 031 type multi-camera,
<Note 5> When handling
~~
;;~
+/-10% 50/60Hz
<Note 7>
tayout together
~~ ~~
[]4S type mulfl-c arnej-a
·~o~------~~~~~~~=-~~
15
mm
Numberof componenttypes 96 types (Max, 8mm tape reel conversion) <Note 1>
<Note 1> tt is varied by the combination
I 1-
25.5
mm
(Yamaha's
standard
components)Repeatability (30) : +/-0.03mm/CHIP, +/-0.03mm/QFP
Applicable components
•
YCilOORA
0402
01005
I
I
•••
BGA
CSP
0603 (Metricbase) component
0201 (Imperialbase)
size
031 mm