Cencorp Depaneling

Cencorp
Depaneling
Cencorp 1000 BR
The best choice for PCB
The PCB depaneling phase should never be a bottleneck in your production, not in terms of quality,
cycle time, change-over time or maintenance.
Then the right choice is the Cencorp 1000 Bottom
Router (BR), chosen by world-class manufacturers
to improve their production throughput. Over 15
years of experience in depaneling has been built
into this 4th generation solution.
Cencorp 1000 BR provides flexibility and
efficiency
The system is extremely easy to program and operate thanks to its graphical user interface with integrated teach mode. Automated tasks such as
automatic rail adjust and automatic program
change as well as the servo gripper mechanism
eliminate the need for any manual intervention or
the need to use special tools in product changeover.
The Cencorp 1000 BR is both efficient and flexible;
the same machine can also be used as a standalone router. Due to the high capacity and short
change-over time, you can replace several standalone machines with one Cencorp 1000 BR.
One single platform
Our standard solutions are based on one platform
and module strategy. However, customer specific
modules can be built when required to meet the
manufacturing process requirements.
Technical Data 1000 BR
Danutek KFT
Angol utca 38
1149 Budapest
Hungary
Tel. +36 1 273 0457
Fax. +36 1 273 0458
Gripper System
Pick & Place Work Envelope
X-travel
Y-travel
Z-travel
W-travel
645
940
150
360
mm
mm
mm
deg
Router Work Envelope
X-travel
Y-travel
Z-travel
450 mm
415 mm
50 mm
Accuracy
Repeatability (x,y,z)
Repeatability (W)
±0.03 mm [3 s]
±0.05 º [3 s]
Pick & Place Performance
Max. axis speed
Max. acceleration
Rec. routing speed
Machine cycle time, min*
2000 mm/s
15000 mm/s2
20–50 mm/sec
4 sec
Board Handling (panel)
Altus Group Ltd
Block 5, Unit 1 Muirhead
Mitchelston Industrial Estate
Kirkcaldy, Fife
KY1 3PB
UK
Min. PCB size
Max. PCB size
Thickness, max.
Transfer protocol
Optional
Transfer height
PCB conveyor type
Top clearance
Bottom clearance
Conveyor speed up to
Width adjustment **
Locking pins adj.
PCB stopper pos.
50 x 50 mm
450 x 350 mm
5 mm
SMEMA
WMV
900 + -25 mm
Two segment
70 mm
20 mm
16 m/min adjustable
Programmable
Programmable
Programmable
PCB pick & place
Gripper finger width
Gripper finger change
Gripping identification
Tool rack f. gripper finger
Pneum. multiple gripper
External Vacuum System
Nilsfisk GB 726
DustAway
Others
Optional
Optional
Optional
Graphical User Interface
Operating system
USB memory
Touch screen
Ethernet card
Dual Monitors
Windows XP
Standard
Optional
Standard
Optional
Machine Vision
CATS
Active vision, Cognex
Fiducial reg. time
Standard
Optional
<1s
Software Options
CMS
APCC
Barcode support
Local SPC
Auto Prg. Change
1D or 2D
Machine Dimensions
Width
Depth
Height
Weight
992 mm
1560 mm
1744 mm
1700 kg
Electrical Service Requirements
Voltage EU (USA)
Frequency EU (USA)
Branch circuit size
Average power cons.
Tel. +44 (0) 1592 655 400
Fax. +44 (0) 1592 655 401
400 (208) VAC 10%
50 (60) Hz
16 A
2 kVA
Pneumatics Service Requirements
Pressure
www.altusgroup.biz
Servo gripper
Programmable
Automatic
Standard
3 - 4 positions
Optional
Base Standards
Teach In (CATS)
Broken bit detection
Routing bit storage
Dust extraction support
E-mail:
Camera assist
Optical
10+10 pcs
Air ionisation
[email protected]
Approx. air consumption
5–7 bar
±10%, dry clean air
100 l/min
Environmental Requirements
Operating temperature
Operating humidity (RH)
10 … 40°C
30% … 85%
Spares: [email protected]
Rev. Q1 09