brochure - IRD India

Transcription

brochure - IRD India
International Conference on Industrial, Mechanical, Civil
and Production Engineering (ICIMCP-2015)
1st March, 2015
Hyderabad, India
International Conference on Industrial, Mechanical, Civil and Production Engineering (ICIMCP-2015) aims to provide
a forum and a vibrant platform for researchers and industry practitioners to share their original research work and
practical experience. This conference sponsored by IRD India and supported by Information Technology Society of
India (IT Society of India). The conference aims to bring together distinguished researchers, practitioners, educators,
entrepreneurs and experts around the world and share their experience and expertise for the benefit of mankind.
ICIMCP-2015 is organized to connect theory and practice and to explore methods of application of research findings
in a down to earth angle.
ICIMCP-2015 provides a multi-disciplinary forum for the exchange of knowledge and expertise in the latest
developments, in the fields of Science, Engineering, Business and Disaster Management. The conference will address
recent issues and focused upon, look for significant contributions to advanced engineering studies in theoretical and
practical aspects. There will be key note speeches, invited lectures, paper presentations, Poster presentation and
audience participation during the conference.
About IRD India
Institute for Research and Development (IRD India) is an independent, private non-profit scientific association of
distinguished scholars engaged in Computer Science, Information Technology, Electronics, Mechanical, Electrical,
Communication and Management. The IRD India members include faculties, deans, department heads, professors,
research scientists, engineers, scholars, experienced software development directors, managers and engineers,
university postgraduate and undergraduate engineering and technology students, etc. IRD India plays an influential
role and promotes developments in a wide range of ways. The mission of IRD India is to foster and conduct
collaborative interdisciplinary research in state-of-the-art methodologies and technologies within its areas of
expertise.
Call for Paper
Topics of interest for submission include, but are not limited to:
Industrial Engineering



















Advanced Product Design and Development
Artificial Intelligence and Knowledge
CRM, MRP and ERP
Decision Analysis/Decision Theory
Engineering Management
Ergonomics and Its Applications
Human Factors Engineering
Logistics and Supply Chain Management
Multidisciplinary Product Development
Operations Research & Optimization
Plant Layout and Facility Planning
Product Lifecycle Management
Production Planning and Control
Productivity and Benchmarking
Project and Technology Management
Quality Control and TQM
Systems Modelling and Simulation
Work Space Design & Equipment Management
Work Study
Mechanical Engineeirng














Automobiles & Automotive Engineering
Compressible Flows, Computational Mechanics
Computational Techniques
Dynamics and Vibration
Energy Engineering and Management
Fatigue and Fracture
Fluid Dynamics, Mechanics & Hydraulics
Fluid Flow & Transport Phenomena
Fuels and Combustion
Heat and Mass Transfer
Internal Combustion Engines
Mechanical Design
Heat Power Engineering
New and Renewable Energy
Production Engineering


















Advance manufacturing Techniques
Automation, Mechatronics and Robotics
CAD/CAM/CIM, FMS and NC/CNC Machining
Casting and Forming Processes
Composites and Smart Materials
Concurrent Engineering
Green and Sustainable Manufacturing
Inventory and Quality Management
Lean and Green Manufacturing
Manufacturing automation modelling & simulation
Manufacturing Management
Material Science and Material Processing
Measurement and Quality Engineering
Metal cutting and Metal forming
Micro, Nano and Rapid manufacturing
Rapid Prototyping , Rapid Response Manufacturing
Reliability and Maintenance
Surface Engineering, Tool Engineering
Civil Engineering




















Structural analysis and design
Soil mechanics and foundations
Phytoremediation
Polymer Processing
Transport, highways and railways engineering
Sustainable materials, processes and eco-efficient construction & technologies
Building services
Architecture
Water and hydro construction
Geo technical Engineering
Rainwater Harvesting
Skybus Technology
Green Concrete
Intelligent Transport System
Block Shear Failure in Tension Members
Reinforced Concrete Corroded Columns
Ground Improvement Techniques
Concrete Admixtures
Effect of cement replacement by Silica fume and fly ash
Self Compacting Concrete







Noise Control Of Buildings
Stone Mastic Asphalt
Polymer Modified Steel Fibre Reinforced Concrete
Significance Of Nanotechnology In Construction Engineering
Analysis of Durability Of High Performance Concrete Using Artificial Neural Networks
Control Of Corrosion On Underwater Piles
DIAGRID
Editorial Board
Chairman
Prof. Pradeep Kumar Mallick
Information Technology Society of India
Bhubaneswer, India
Email: [email protected]
President
Dr. (Mrs.) Rama Sushil
Prof., Dept. of IT, DIT University
Dehradun, Uttarakhand, India
Dr. D. Asha Devi
Professor, Dept. of ECE
MITS, Madanapalle
Dr. (Mrs.) Rama Sushil
Ph.D.(IIT Roorkee)
Professor of Computing,
Faculty of computer science & application
DIT University, Dehra Dun, Uttarakhand, INDIA
Dr. M.Suresh Babu,
Professor & Head, Department of Computer Applications,
Madanapalle Institute of Technology & Science,
Madanapalle - 517325, Andhra Pradesh, India.
Programme Committee Members
Dr. Suhas Deshmukh
Professor, Mechanical Engineering Department,
Sinhgad Academy of Engineering,
Kondhawa(Bk), Pune
Prof. Dipti Prasad Mishra
(M.Tech., Ph.D, Thermal Engg. (IIT, Kharagpur))
Associate Professor & HOD
Institute of Technical Education & Research
Jagamohan Nagar, Khandagiri
Bhubaneswar – 751030, India
Akash Kumar Bhoi
Asst. Professor
Department of Applied Electronics & Instrumentation Engineering
SIKKIM MANIPAL INSTITUTE OF TECHNOLOGY (SMIT)
Majitar, Rangpo, E - Sikkim, 737136
Zaki Ahmad
Department of Mechanical Engineering,
KFUPM,Box # 1748, Dhaharan 31261 Saudi Arabia
Rajeev Ahuja
Physics Department,Uppsala University,
Box 530, 751 21 Uppsala Sweden
B.T.F. Chung
Department of Mechanical Engineering, University of Akron, Akron,
Ohio 44325 USA
S.Z. Kassab
Mechanical Engineering Department,
Faculty of Engineering, Alexandria
University, Alexandria, 21544 Egypt
Prof. Daniel Benevides da Costa
Federal University of Ceara (UFC)
Brazil
Prof. A.Cagatay Talay
Istanbul Technical University
Turky
Ashraf Shikdar
Department of Mechanical & Industrial Engineering,
S.Q. University,P.O Box 33, Al-Khod 123 Oman
Registration Information
Paper should be in the format strictly specified on the conference website. Only the selected papers will get the intimation who will
be accepted for publication. Kindly do not submit the paper multiple times, it may lead to cancellation of an article/paper.
Submit your Article/Review/Research Paper to [email protected]
Category
Indian
Outside India
Academecian/Practitioner
Rs 4,500
USD 250
PhD Scholars / M.Tech / (Any Post Graduate Students)
Rs 3,500
USD 200
B.Tech Student
Rs 2,500
USD 150
Listner/Co-author
Rs 2,000
USD 100
Step2 - Registration Form
All authors have to sign the Registration Form, which is in Doc format.
Step 3 - Camera Ready Paper submission
All the paper must be in IEEE double column guidelines and must be submitted as Microsoft word DOC or DOCX
format. IEEE guidelines are available at Paper Submission Webpage.
Step 4 - Registration
After Registration, Please Send the Registration Form & Transaction Details (such as Photo Copy or Scan Copy of
Transaction Slip / Bank Statement / Online Payment Details) along with Enrollment No. by Email
([email protected]) or by Speed Post Only.
Important Dates
Paper should be in the format strictly specified on the conference website. Only the selected papers will get the
intimation that will be accepted for publication. Kindly do not submit the paper multiple times, it may lead to
cancellation of an article/paper.
Submission of Full Paper
18th February, 2015
Notification of Acceptance
20th February, 2015
Late Registration
25th February, 2015
Conference date
1st March, 2015
Publication Guidelines
Paper should be in the format strictly specified on the conference website. Only the selected papers will get the
intimation who will be accepted for publication. Kindly do not submit the paper multiple times, it may lead to
cancellation of an article/paper.
Venue
Hotel Silver Park
7 - 1 - 209/1/A, Ram Mirra Towers,
Beside Satyam Theatre, Ameerpet,
Hyderabad, AndhraPradesh, PIN:500016
Contact Us
Submit your Article/Review/Research Paper to [email protected]