WICS-2222 Infection Control Hand Washing Sink A.D.A.
Transcription
WICS-2222 Infection Control Hand Washing Sink A.D.A.
Willoughby Industries - Healthcare Products WICS-2222 Infection Control Hand Washing Sink A.D.A. Compliant Recommended Specifications To specify fixture and accessories, use the Model Number and Options page. Example: To specify an infection control hand washing sink with a stainless steel pedestal, wrist blade faucet in sandstone color. Use the following Willoughby Model Number: WICS-2222-WB2-SS1. Wall-hung Infection Control Hand Washing Sink shall accommodate one user and is designed to minimize spread of infectious disease. ADA compliant solid surface sink shall be Willoughby Model No. WICS-2222. Infectious Control Features: • Deep sink basin w/ sloped edges to minimize splashing • Integral side and rear splash-guards to prevent splash from landing outside of bowl • Offset sink drain to prevent aerosolization of trap The sink bowl with integral side and rear splash-guards shall be contents constructed of Aquasurf® molded cast polymer densified solid • Antimicrobial drain and tail piece to restrict growth and surface material composed of polyester/acrylic resin, UV stabicolonization of bacteria (optional trap available) lizer, aluminum trihydrate and mineral fillers. The Aquasurf® solid • No overflow in sink basin to limit possible area for surface material is resistant to stains, impact and burns. Surface bacteria growth damage can be easily repaired with everyday cleansers and/or fine grit abrasives. ADA,TAS,UFAS and Plumbing Standard Compliant: When the lavatory is mounted at the standard adult rim height, WICS-2222 sink shall be supplied with: it is designed to provide compliance with all applicable ADA, TAS, UFAS accessibility standards. It also complies with the • Antimicrobial drain and tailpiece. (trap by others) (optional antimicrobial trap available - AMT on page 2) requirements of the CSA B45,5-11/APMO Z124-2011 harmonized plumbing standard. • 1.5 gpm non-aerating laminar outlet rigid goose neck faucet with wristblade controls. (optional infrared (IR) faucet models and thermostatic mixing valve available) Mounting: The sink may be surface-mounted as supplied or supported by • Fully welded wall hung pedestals for surface mounting. in-wall carriers supplied by others. Proper backing for surface(mounting hardware by others) • One piece formed stainless steel trap cover w/ stainless mounted sinks provided by others. steel mounting hardware Optional Features: * Note: Plug-in transformer must be used with a ground fault visit our website at www.willoughby-ind.com 5105 West 78th Street ● Indianapolis, IN. 46268 (317) 875-0830 ● Fax: (317) 875-0837 ● (800) 428-4065 © Rev. 2/2015 MADE IN THE U.S.A. 17-41 MODEL NUMBER AND OPTIONS: 1.) Lavatory Model: WICS-2222 2.) Faucet: WB2 Wristblade, 4CC, 1.5 GPM Laminar Flow, Rigid 3 1/2" Gooseneck Faucet (Standard) SSF Sensor Spout, IR Operated (24v Transformer is required) SSF-B Sensor Spout, IR Operated (battery operated) 3.) Lavatory Deck Colors: BN Bone (Solid) BG Black Granite GG Grey Granite GW Glacier White (Solid) NB Nocturnal Blue RC Red Coral SG Sea Green SS Sandstone WG White Granite 4.) Options: TF 24v Transformer (SSF Faucet Only) TMV Thermostatic Mixing Valve AMT Antimicrobial Trap Approved For Manufacturing By: Date: Company: WILLOUGHBY RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN AND DIMENSIONS WITHOUT FORMAL NOTICE AND WITHOUT INCURRING OBLIGATION. VERIFY ALL DIMENSIONS WITH FACTORY PRIOR TO ROUGH-IN 22-1/4" 22" 16-1/4" 6-1/2" 34" ADA MAX 8-1/2" 16-7/16" FINISHED FLOOR visit our website at www.willoughby-ind.com 5105 West 78th Street ● Indianapolis, IN. 46268 (317) 875-0830 ● Fax: (317) 875-0837 ● (800) 428-4065 17-42 28-7/8" MADE IN THE U.S.A. © Rev. 2/2015