MPI Hybrid Series Photovoltaics

Photovoltaics
*Also support parallel feature to 3-phase feedback (3 units)
MPI Hybrid Series
These hybrid solar inverters combine the features of both grid-tied and off grid
operations, and allow users to operate in three main modes:
●
Grid-Tied (Feedback)
●
Off Grid
●
Grid-Tied with Battery Backup
Available in 3kw (single phase version) and 10kw (3-phase version), these hybrid
systems offer a pure sine wave inverter, a battery charger, and support of PV
input up to 500V (3kw model) and 900V (10kw model) with MPPT functionality.
Maximum PV power input is enhanced to 4.5kw and 14.85kw array, which allows
users greater flexibility in supporting load as well as feeding extra solar power
back to grid. In the event of grid failure, these systems will switch to battery
source like an off-grid inverter and keep your load backed up. The bundled
powerful monitoring software, SolarPower, allows users total control and access
to a wide variety of operations to meet all your need. This series is fully compliant
with and certified in VDE (Germany), AS (Australia), and CE.
**Optional communication accessories include MODBUS card, MODBUS server, and Energy Meter.
Available upon request
[email protected] │ www.mppsolar.com
Operation Modes
SOLAR
BATTERY
SOLAR
BATTERY
SOLAR
BATTERY
UTILITY
HOUSE LOAD
UTILITY
In this operation mode, users can program unit to
● Feedback PV power to utility
● Provide PV power to load
● Charge battery by PV
Different priority settings based on the above are
offered in 4 main options in this mode. Charging
source may be selected from PV and grid as default,
PV only, or none (when charging not intended). All
programming conditions can be done in the CDbundled software.
In this operation mode, the inverter will only
behave like a pure grid-tie inverter where it only
feeds back electricity to grid from PV source.
There is no priority setting available when this
mode is selected.
HOUSE LOAD
UTILITY
HOUSE LOAD
In this operation mode, grid feedback to utility is
disabled. Users can only program unit to:
● Provide PV power to load
● Charge battery by PV
Different priority settings are available in 3
options, and grid relay may be connected to
inverter to provide support when load > 3kw.
Charging source may be selected from PV and
grid, PV only, or none (charging not intended).
All programming conditions can be done in the
CD-bundled software.
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
[email protected] │ www.mppsolar.com
Parallel Concept
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
[email protected] │ www.mppsolar.com
Parallel Concept
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
[email protected] │ www.mppsolar.com
Specifications
MPI-3000 HYBRID 3K
MPI-10000 HYBRID 10K
3,000W
10,000W
Max PV Input Power
4500W
14850W
Max PV Input Voltage
500Vdc
900Vdc
Start-up / Initial Feeding Voltage
116 / 150Vdc
320 / 350 Vdc
PV MPPT Range
250 - 450Vdc
350 - 850 Vdc
18A
18A x 2
1
2
>96%
>96%
Rated Power
Continuous Output
PV Input Rating (GRID-TIE)
Max PV Input Current
MPPT Tracker
Max DC/AC Conversion Efficiency
AC Input
120 - 140Vac / 180Vac
Start-up / Auto Restart Voltage
Input Voltage Range
170 - 280Vac
Nominal Frequency
50 / 60 Hz
Max AC Input Power
5,100W
10,000W
30A
25A
208/220/230/240Vac
230Vac (P-N) / 400Vac (P-P)
184 - 265Vac
184 - 265Vac (P-N) / 318 - 460Vac (P-P)
Max AC Input Current
AC Output
Nominal AC Output Voltage
Output Voltage Range
Output Frequency (GRID-TIE)
47.5 - 51.5Hz / 59.3 - 60.5 Hz
Output Frequency (OFF-GRID)
50 / 60Hz, auto-sensing
Pure Sine Wave
Output Waveform
Max Output Power (via grid relay)
6,000W
10,000W
Max Output Power (battery mode)
3,000W
10,000W
>93%
>91%
Max Efficiency
Battery Charger
48Vdc
Nominal DC Voltage
25A
Max Charging Current
200A
ENVIRONMENTAL / MECHANICAL SPECIFICATIONS
RS232 / USB
Communication Port
Certifications
Operating Temp.
EN62109-1, EN62109-2, EN62040-1 / CE
VDE4105, VDE0126-1-1
0 - 40°C
-10 - 50°C
0 - 90% RH (No condensing)
Operating Humidity
Dimension
420*415*170mm
622*500*167mm
Net Weight
16Kg
45Kg
*Product specifications are subject to change without prior notice. MPP Solar is a registered trademark of MPP Solar Inc.
[email protected] │ www.mppsolar.com