DAVIES MEGACRYL LATEX PAIN ACRYL LATEX PAINT

Transcription

DAVIES MEGACRYL LATEX PAIN ACRYL LATEX PAINT
DAVIES MEGACRYL LATEX PAINT
Description
Is a premium 100% acrylic water based interior and exterior paint recommended
for stucco, masonry, plaster, bricks, hollow blocks, cement boards, gypsum boards,
acoustic boards, bagasse boards and properly primed wood & metal.
Main Features
& Benefits
•
•
•
•
•
•
•
•
•
•
•
Properties
100% acrylic water-based, lead and mercury free.
Advanced rheology technology.
Tough paint film for outstanding weather resistance and durability.
High hiding and coverage, thus fewer paint coats required.
Superior scrub, dirt and stain resistance.
Paint will look cleaner and fresher for a longer period of time.
Triple action algae, mildew and mold protection.
Available in wide spectrum of ready-mixed colors, no more trial and error in
color matching.
Save money, time and help protect environment by eliminating paint wastage.
Tintable to more than 2,000 colors with the Davies Color Factory fullycomputerized tinting system.
Choose the color that suits your mood and lifestyle that is perfect for your
home.
Appearance
Color Range
Theoretical Coverage
Drying Time @ 28°C
Pack Sizes
Shelf Life
Application
: Gloss, Semi Gloss, Eggshell and Flat.
Available in White, and 74 exciting colors for semi-gloss
finish, special colors supported by DAVIES Color Factory.
: 25-30 SqM/4 liters per coat depending on surface
porosity.
: Surface Dry : Within 1 hour, Re-coat Interval : 2-4 hours
: 16 liter, 4 liter and 1 liter cans.
: One year when stored in dry and cool conditions.
Apply by brush, roller or spray. Surfaces must be thoroughly dry, clean and free
from loose dirt and powder.
Mixing Direction
Reduction
Tinting
Thinning/Cleaning
: Stir well before use.
: If necessary, reduce with not more than 1/4 liter of water
per 4 liters of paint.
: DAVIES Acry-Color
: Water
1
DAVIES MEGACRYL LATEX PAINT
Specification
Painting System
Concrete Surfaces
New concrete and plaster surfaces must be thoroughly cured for 28 days before
painting, having a moisture content of less than 15% and a pH level below 10.
Apply one coat of DAVIES 1350 Acrylic Concrete Primer & Sealer or DAVIES 1380
Alkali-Resisting Sealer
1. (for best result) by brush, roller or spray. Let dry for 2 hrs.
2. Repair surface imperfections with DAVIES 5000 Concrete Putty using putty
knife. Let dry for 2 hrs and sand.
Spot prime puttied areas with DAVIES 1350 Acrylic Concrete Primer & Sealer or
DAVIES 1380 Alkali
3. Resisting Sealer by brush, roller and spray. Allow to dry for 2hrs.
4. Finish with two coats of DAVIES Megacryl Acrylic Latex Paint by brush,
roller or spray. Allow 2 hours in between coats.
Wood Surfaces
Apply one coat of DAVIES 1360 Interior Primer and Sealer by brush, roller or
spray. Allow overnight drying.
2. Finish with two coats of DAVIES Megacryl Acrylic Latex Paint by brush,
roller or spray. Allow 2 hours inbetween coats.
1.
Metal Surfaces
1.
2.
Apply one coat of DAVIES 911 Red Oxide Primer. Allow overnight drying.
Finish with two coats DAVIES Megacryl Acrylic Latex Paint by brush, roller
or spray. Allow 2 hours in between coats.
MAIN OFFICE
1387-A Mercedes Ave.
San Miguel, Pasig City 1600
Tel. (02) 641-7101 / Fax. 641-9004
Customer Care Hotline: (02) 570-7000
MARKETING OFFICE & SHOWROOM
207 Banawe St., Quezon City
Tel. (02) 740-8386 to 87 / Fax. 740-6957
[email protected]
www.daviespaints.com.ph
2