VISHAY 10MQ060N datasheet
Transcription
VISHAY 10MQ060N datasheet
10MQ060NPbF Vishay High Power Products Schottky Rectifier, 2.1 A FEATURES • Small foot print, surface mountable Available • Low forward voltage drop RoHS* • High frequency operation Cathode Anode COMPLIANT • Guard ring for enhanced ruggedness and long term reliability SMA • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for industrial level DESCRIPTION The 10MQ060NPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. PRODUCT SUMMARY IF(AV) 2.1 A VR 60 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS DC VRRM IFSM tp = 5 µs sine VF 1.5 Apk, TJ = 125 °C TJ Range VALUES UNITS 2.1 A 60 V 40 A 0.63 V - 55 to 150 °C 10MQ060NPbF UNITS 60 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current See fig. 4 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 6 IFSM Non-repetitive avalanche energy EAS Repetitive avalanche current IAR TEST CONDITIONS 50 % duty cycle at TL = 120 °C, rectangular waveform On PC board 9 mm2 island (0.013 mm thick copper pad area) 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1 A, L = 4 mH VALUES UNITS 1.5 A 40 A 10 2.0 mJ 1.0 A * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94118 Revision: 16-Apr-08 For technical questions, contact: [email protected] www.vishay.com 1 10MQ060NPbF Vishay High Power Products Schottky Rectifier, 2.1 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 1A Maximum forward voltage drop See fig. 1 VFM (1) TJ = 25 °C 1.5 A 1A TJ = 125 °C 1.5 A Maximum reverse leakage current See fig. 2 IRM (1) Threshold voltage VF(TO) Forward slope resistance Typical junction capacitance Typical series inductance Maximum voltage rate of change rt CT LS dV/dt TJ = 25 °C VR = Rated VR TJ = 125 °C TJ = TJ maximum VR = 10 VDC, TJ = 25 °C, test signal = 1 MHz Measured lead to lead 5 mm from package body Rated VR VALUES UNITS 0.63 0.71 V 0.57 0.63 0.5 mA 7.5 0.45 V 86.8 mΩ 31 pF 2.0 nH 10 000 V/µs VALUES UNITS - 55 to 150 °C 80 °C/W Note (1) Pulse width < 300 µs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance, junction to ambient RthJA TEST CONDITIONS DC operation Approximate weight Marking device Case style SMA (similar D-64) 0.07 g 0.002 oz. V1H Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 94118 Revision: 16-Apr-08 10MQ060NPbF Schottky Rectifier, 2.1 A 1 0.1 0.2 IR - Reverse Current (mA) Allowable Case Temperature (°C) TJ = 150 °C TJ = 125 °C TJ = 25 °C 150 140 DC 130 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 110 100 90 Square wave (D = 0.50) 80 % rated VR applied 80 See note (1) 70 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 0.4 0.8 1.2 1.6 2.0 2.4 VFM - Forward Voltage Drop (V) IF(AV) - Average Forward Current (A) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 4 - Maximum Average Forward Current vs. Allowable Lead Temperature 100 1.4 10 1.2 Average Power Loss (W) IF - Instantaneous Forward Current (A) 10 Vishay High Power Products TJ = 150 °C TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 75 °C 0.01 TJ = 50 °C 0.001 TJ = 25 °C 0.0001 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 1.0 RMS limit 0.8 DC 0.6 0.4 0.2 0 10 20 30 40 50 60 0.4 0.8 1.2 1.6 2.0 2.4 IF(AV) - Average Forward Current (A) Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage Fig. 5 - Maximum Average Forward Dissipation vs. Average Forward Current CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 0 VR - Reverse Voltage (V) 20 10 30 40 50 60 IFSM - Non-Repetitive Surge Current (A) 0 100 10 At any rated load condition and with rated VRRM applied following surge 1 10 100 1000 10 000 VR - Reverse Voltage (V) tp - Square Wave Pulse Duration (µs) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) Document Number: 94118 Revision: 16-Apr-08 For technical questions, contact: [email protected] www.vishay.com 3 10MQ060NPbF Vishay High Power Products Schottky Rectifier, 2.1 A ORDERING INFORMATION TABLE Device code 10 M Q 060 N TR PbF 1 2 3 4 5 6 7 1 - Current rating 2 - M = SMA 3 - Q = Schottky “Q” series 4 - Voltage rating (060 = 60 V) 5 - N = New SMA 6 - None = Box (1000 pieces) TR = Tape and reel (7500 pieces) 7 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95018 Part marking information http://www.vishay.com/doc?95029 Packaging information http://www.vishay.com/doc?95034 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94118 Revision: 16-Apr-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1