Rotatub Data Sheet

page 1 of 1
DATA SHEET
Effective May 1, 2015
Product Overview
Mixing rubber has never been so easy with the Rotatub and Umix. Designed and manufactured by A1 Rubber
specifically to address traditional mixer problems, these mixers have answered the industry demand for a more
professional mixer. From its unique polyethylene blade configuration to its self cleaning capability the Rotatub
and Umix are sure to impress everyone who uses it.
Three sizes are available to meet the demands for repairs, small operators and large volume commercial
operators. Umix is a light, compact drill powered mixer for small wetpour pads and repairs. It only requires
a minimum 14v battery powered drill and a minimum 13mm chuck. All mixers come with a 12 month
Manufacturers Warranty.
Specifications
Rotatub 20
Opt.1 Power
Requirements
Dimensions
Weight
Capacity
Rotatub 60
Opt.1 Power
Requirements
Dimensions
Weight
Capacity
240 volt 1.7Kw Single Phase
850mm W x 850mm L x 1220mm H
110kg
20kg of rubber crumb plus additives
240 volt 1.7Kw Single Phase
850mm W x 1000mm L x 1380mm H
135kg
60kg of rubber crumb plus additives
Opt.2 Power
Requirements
Volume
Gearbox
Mixing Blades
Opt.2 Power
Requirements
Volume
Gearbox
Mixing Blades
110 volt 1.5Kw Single Phase
113.1L/0.11m³
40:1
1 Heavy duty / 2 standard
110volt 1.5kw Single Phase
211.6L/0.21m³
80:1
1 Heavy duty / 3 standard
Umix
Power Minimum 14 volt battery powered drill
Requirements with minimum 13mm chuck size
Capacity 10kg of rubber crumb plus additives
Dimensions 400mm W x 550mm L x 500mm H
Weight 17kg
- Detailed operator user manual, exploded view diagram and part list document is available upon request.
- Umix does not come with a drill, this is supplied by the user.
Applications
Three sizes are available to meet the demands of small operators and large volume commercial operators.
Disclaimer
The above information is derived from periodic tests taken on actual product from the manufacturing process. Some variances in specifications and raw surface appearances are possible due to the use of
recycled materials and our manufacturing tolerances. In practice, the difference in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The
recommendation relating to the application and end use of A1 Rubbers products, are given in good faith, based on A1 Rubbers current knowledge and experience of the product when properly stored,
handled and applied under normal conditions in accordance with A1 Rubbers recommendations. The user of the product must test the product’s suitability for intended application and purpose. A1 Rubber
reserves the right to change the properties and tolerances of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current Terms and Conditions of
Sales and delivery. Users must refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.
Document No. ROTAMAY15DATA
www.a1rubber.com
QLD
p (07) 3807 3666
f (07) 3807 2344
e [email protected]
34 Binary St, Yatala, 4207
NSW
p (02) 9756 2146
f (02) 9756 2149
e [email protected]
40 Bentley St, Wetherill Park, 2164
VIC
p 0408 607 888
f (07) 3807 2344
e [email protected]