Sales Brochure - Apex Advanced Technologies, LLC

Find out what your '
competitors already
l{now...
General SUDlDlary
Apex Superlube®
•
Predictable
•
Excell~nt ejection and green strength
•
Proprietary database of metal compressibility
with ideal lubrication
mal{es you money
Iinprove Your Profitability
density and lubrication
Appli~ation
Significantly reduce tool wear
Scrap rates reduced in pressing and sintering
Improved furnace throughput. ..
like buying capacity
Reduction in press tonnage ...
less new capital needed
Inerease Your Sales and Margins
Higher green and sintered densities allow you to
compete for new and high margin products.
Increased physical properties allow for substitution of other metal shaping techniques
APEX
needs
ADVANCED TECHNOLOGIES,
Slale of Ihe Al'l Luhricants
Apex
Superlube®
SUDlDlary
•
Full density range, up to 7.4g/cc
•
Elimination
of double press/double sinter
•
Elimination
of cracks in parts, up to 7.4g/cc
•
Minimization of ejection problems, up to 7.4g/ cc
•
Minimization of die wear, up to 7.4g/cc
•
Highly efficient/cost effective copper infiltration
•
Elimination of cracking and blistering with high
nickel formulations.
Let It Make Money For Yon
Technology Base
Apex Superlube®
Apex Enhancer 51
Custom Superlube®jgraphite mixes
Flow Enhanced Superlube®jgraphite mixes
Enhanced Flow Enhancer 51
Master Batch Superlube®jcustom
\
Eas,' To Use
\
II
ADVANCED
TECHNOLOGIES,
(5.5., Low alloy, Malleable iron, AI, Cu)
LLC
U.S. Sales Representatives for Apex Advanced Technologies
Graphite Master Batch makes mixing a breeze
I
\ I'",,\,hall('('d
\llt~g-hell~ CoatiJl.~::-;
Apex Enhancer ST to facilitate use at all
density ranges,
:2~1 Hi\'el'
HO(ltL I-iid~e'ray~
p.\
nll.77:2.:)[L,)()
W\\"\,.
additives
(Fe3P, Bi, Mn, Si, V)
Agglomerated Spherical gas atomized high alloys
(Cr, Ni, Co)
Near Full density activation technology
APEX
I
LLC
and Bind(~rs
~\
J1('glit'lIyCnal
illg-~.COHl
T('chllolo;!i"" LLC
If):),- \ \\1',1 HOth SireI'I
C!"\ (·Ialld. Ohio III :\,";-.)In2
Pho.l<': 216.B9B.I.)'):)
Fax:
21 ().B9B.:)66 I
www.apexadvancedtechnologies.com
I
Apex Superlnbe®IEnhan~er ST
State of the Art Lnbri~ant and Binders for the P 1M Industry
Density < 6.9~/~~
Density > 6.9 to 7.1 fi./~~
Density > 7.1fi./~~
Apex Enhan~er ST
Apex Snperlnbe®
Apex Enhan~er ST
Apex Snperlnbe®
Apex Enhan~er ST
Fixed Additions
Calculated Additions
Excellent Green Strength
Excellent Lubricity
Minimization
Excellent Lubricity
Minimization
Elimination
of die wear
of Zinc-based lubricants
of cracking
Minimization
of chipping
Handling defects
Environmentally
friendly
of die wear
Excellent Green Strength
Up to 50% reduction in ejection forces
Good compressibility
Minimization
Calculated Additions/Low use levels::::;0.4%
Effective copper infiltration
Elimination
of blistering with nickel formulations
Elimination
of Zinc-based lubricants
Clean burn/Environmentally
Large part capability-up
Enhancer ST for volume adjustments
Green Density results comparable to die wall, hot
compaction, warm compaction or double pressing
Physical properties improved as much as 15-20%
Elimination of Density Gradients
Dimensional stability and resulting
scrap rates improved
Excellent Lubricity
Minimization of die wear
Excellent Green Strength
Increased compressibility
Up to 25% reduction in compression forces
Densities up to 7.4g/cc
Effective copper infiltration
Elimination of blistering with nickel formulatiom
Elimination of double pressings
Clean burn/Environmentally
friendly
Large part capability-up
to 9 lbs.
friendly
to 9 lbs.
Efficient for Iron, Stainless Steel and
Copper based alloy
Part temperature needs to be a minimum 1200 F
to maximum 1800 F to function correctly
APEX
Apex
Superlube®
Let It Make Money For Yau
ADVANCED TECHNOLOGIES,
State
of the Art
Lub!"ieallts
and
LLC
Billdt>!"s
Superlube® is a registered
trademark of
Apex Advanced Technologies LLC.
Patents #6,679,935 & #7,183,242