Grill Gazebo Assembly Instructions & Users Manual BRAND

BRAND
Assembly Instructions
& Users Manual
Grill Gazebo
FSMVPT3009
Please keep this instruction manual for future reference
Customer Service: (888) 922-2336, 8:00am to 12:00am, CST
Live Chat @ Academy.com: 24/7
----------------------OR--------------------Customer Service: (866) 905-4107, 8:30am to 5:00pm, PST, (11:30am to
8:00pm, CST), Monday thru Friday
(Made in China)
Table of Contents
Warnings………………………………………………………………….2
Tools and Hardware……………………………………………………..3
Parts List……………..…………………………………………………...4
Assembly Instructions………………………………………………..5-10
Care and Maintenance……………………………………………........11
Warranty Information………………………………………..................11
Note: Before beginning assembly of product, make sure
all parts are present. Compare parts with package content
list, hardware, and parts list on page 3 & 4. If any part is
missing or damaged do not attempt to assemble the unit.
Contact customer service for replacement parts.
Page 1 of 11
Warnings
• Assemble the Gazebo on a soft, non-abrasive surface
such as grass to avoid damage.
• This product is not intended for use during inclement or
severe weather, that includes but is not limited to rain, hail,
sleet, snow, wind, freezing conditions and extreme heat.
• When not in use, store and/or cover the product in a cool
dry location.
• Do not use the product as a support. Do not shake, lean or
climb on the Gazebo.
• Children under the age of 16 should not be engaged in
assembly, removal or disassembly. Children under the age
of 10 should be supervised by a competent adult when
near the gazebo.
• This product is for residential use only. This product is
NOT intended for commercial use and misuse will void the
warranty.
• Item is heavy. Handle with care.
• May require two adults for safe assembly.
• Keep all flame and heat source away from this canopy
fabric. This canopy meets the flammability requirement of CPAI-84. The
fabric may burn if left in continuous contact with any flame source. The
application of any foreign substance to the canopy fabric may render the
flame-resistance properties ineffective.
• Weight limit: 75lbs (34.02kg) for each Bar counter top
Page 2 of 11
Tools Required
V
Philips screwdriver (Included)
W
Allen wrench (Included)
X
Wrench (Included)
Hardware
Q
ST5 * 10mm Self-tapping screw
16
R
M6 * 20mm Wing bolt
12
S
M6 * 30mm Wing bolt and nut
4
T
Upper tube bolt
4
U
Gazebo anchor kit
8
Page 3 of 11
Parts List
A
Support post 1
2
B
Support post 2
1
C
Support post 3
1
D
Panel 1
2
E
Panel 2
2
F
Upper canopy corner
pole
4
G
Bar counter top
2
H
Center support hub
1
I
U-shaped bracket
4
J
Bottle opener
1
K
Cap plate
4
L
Post base
4
M
Small canopy
1
N
Large canopy
1
O
Bar hook
6
P
Top hook
1
Page 4 of 11
Assembly Instructions
Step 1:
1) Attach U-shaped bracket (I) to the top of
Support post 1 (A) using Upper tube bolt (T).
Repeat this step for Support post 2 (B) and
Support post 3 (C). So that all posts have an
attached U-shaped bracket.
2) Insert Support post 1 (A) into Cap plate (K), by
moving it above the hole of Support post 1 (A), and
then insert Post base (L) into Support post 1 (A),
ensure that the tab on the Post base (L) pops into
the secure hole on Support post 1 (A), then cover
Cap plate (K) on Post base (L).
Repeat this step for Support post 2 (B) and
Support post 3 (C).
Step 2:
Insert Panel 1 (D) into Support post 1 (A) and
Support post 2 (B), then secure the Support post 1
(A), Support post 2 (B) and Panel 1 (D) using 2 X
M6 * 20mm Wing bolts (R).
Page 5 of 11
Assembly Instructions
Step 3:
Insert the Panel 1 (D) into Support post 1 (A) and
Support post 3 (C), then secure the Support post 1
(A) , Support post 3 (C) and Panel 1 (D) using 2 X
M6 * 20mm Wing bolts (R).
Step 4:
Insert the Panel 2 (E) into Support post 1 (A) and
Support post 2 (B), then secure the Support post 1
(A) ,Support post 2 (B) and Panel 2 (E) using 2 X
M6 * 20mm Wing bolts (R).
Repeat above step for another side of Support
post 1 (A) and Support post 3 (C).
Page 6 of 11
Assembly Instructions
Step 5:
Attach the Bar hooks (O) to Bar counter top (G)
using 12 X Self-tapping screws (Q) for both sides
of Bar counter top (G) .
Step 6:
1) Insert Bar counter tops (G) into Support post 1
(A) and Support post 2 (B). Secure the Bar counter
top (G) to Support post 1(A) and Support post 2
(B) using 4 X M6 * 20mm Wing bolt (R).
Repeat above step for another side of Support
post 1 (A) and Support post 3 (C) .
2) Attach the Bottle opener (J) to Support post 3
(C) using 4 X Self-tapping screw (Q).
Page 7 of 11
Assembly Instructions
Step 7:
1) Insert Upper canopy corner poles (F) into the
Center support hub (H).
2) Screw the Top hook (P) into the Center support
hub (H).
Step 8:
Place large canopy (N) onto the assembled Upper
canopy corner pole (F).
Page 8 of 11
Assembly Instructions
Step 9:
Place the small canopy (M) onto the assembled
Upper canopy corner pole (F) and then attach the
four corners of small canopy (M) to Upper canopy
corner pole(F) gently.
Step 10:
Attach four corners of assembled Upper canopy
corner pole (F) and U-shaped bracket (I) using 4 X
M6 * 30mm Wing bolt and nuts (S).
Page 9 of 11
Assembly Instructions
Step 11:
1) Attach the four corners of large canopy (N) to
Upper canopy corner pole (F) gently.
2) Move the Cap plate (K) above the hole of
Support post 1 (A), then insert Gazebo anchor
kits(U) into the holes of Post base (L).
Repeat above step for Support post 2 (B) and
Support post 3 (C).
Page 10 of 11
Care and Maintenance
• For best results, clean the frame with a damp cloth and
dry thoroughly. This will help prevent mildew by removing
dirt particles that may accumulate.
• Do not use abrasive materials or cleaners.
• In order to prolong the use of the product, do not use
during inclement weather (rain, hail, sleet, snow, wind,
fire, extreme heat and freezing conditions). The product
should be stored in a dry, sheltered place.
• Use the Gazebo anchor kit to secure Gazebo. Additional
Grounding anchors may be needed.
Warranty Information
This Product has been manufactured under the highest standards of
quality and workmanship. We warrant to the original consumer
purchaser that all aspects of this product will be free of defects in
material and workmanship for one year from the date of purchase. A
replacement for any defective part will be supplied free of charge for
installation by the consumer. Defects or damage caused by the use
of other than genuine parts are not covered by this warranty. This
warranty shall be effective from the date of purchase as shown in the
purchaser receipt.
This warranty is valid for the original consumer purchaser only and
excludes industrial, commercial or business use of the product,
product damage due to shipment or failure which results from
alteration, product abuse, or product misuse, whether performed by a
contractor, service company, or consumer. We will not be
responsible for labor charges and/or damage incurred in installation,
repair or replacement nor for incidental or consequential damage.
Page 11 of 11