data sheet - Imergy Power Systems

Transcription

data sheet - Imergy Power Systems
IMERGY ESP250 SERIES
TM
Large Scale Energy Storage Platform (ESP)
Imergy Power Systems’ versatile energy storage solutions
will reduce your energy costs and provide you with better
power quality, reliability and resilience. This turnkey
energy storage solution is inherently scalable with available
powers ranging from kilowatts to multiple megawatts and,
independently, with available energy ranging from two to
twelve hours output duration. Imergy’s solutions integrate
seamlessly with intermittent renewable power sources
in applications ranging from grid-connected commercial
buildings, to islanding smart microgrids, to utility-scale solar
and wind, and enable multiple benefits such as demand
cost reduction, shifting peak generation to match peak load,
and operation regardless of grid failure. Our disruptive,
patented technology, with long life and unlimited chargedischarge cycle capability, puts the power in your hands.
Imergy ESP250TM Containerized Module
Controls & PCS
Stacks
Electrolyte Tanks
Double Containment
Key Features
• Turnkey solution in secured weatherproof
enclosure
• Safe: non-flammable, non-explosive
• Flexible and scalable: ability to
independently size power and energy
• Unlimited cycles (partial, full, at any DOD)
• 100% performance at all operating
temperatures
• Long life and lowest LCOE of all battery
storage systems
Key Applications
• Power security (system can operate in full
islanded mode)
• Power quality (fast response time for
seamless power source transitions, load
transients, PV firming)
• Smart grid ready monitoring and
communication
• Low maintenance
• Cradle to cradle, recyclable/reusable
• Peak shaving
• Demand response
• Energy shifting
• Utility grid ancillary services
• Renewable energy firming
• Microgrid and back up power
Imergy ESP250 Specification
TM
Parameter
Rating
Comments
Power rating output (nominal)
AC kW: 380 to 480V 50/60Hz 250 kW
Excludes pulse capability
Response time AC
-100% to 100% output
Excludes communication latency effects
<70ms
Transition between Grid and islanded modes
<100ms
Dimensions
11.2 x 2.2 x 2.4 (m) / 36.9 x 7.3 x 7.9 (ft)
40 foot container x 2
Containerized electrolyte
Determined by hours of storage
Inlcudes secondary containment
Cycles
100,000
No limit. Based on life only
DC DC efficiency
75%
Measured at constant current over 100% duty
cycle
Storage duration
Up to 8 hours at nominal power
A function of electrolyte tank selection
Capacity range (DOD)
0 to 100%
No life impacts
Communications interface
Modbus / TCPIP
Multiple including CANBUS in multiple strings
Ambient operating conditions
-20 ° to +55 ° C / -4 ° to +131 ° F
Conditioned space not required
Altitude
Up to 2000 m / 6,562 ft
AC derated based on PCS and transformer
Relative humidity
0-95%
LxWxH
Availability figure
Self discharge
99.16%
%/day
Noise level dBa 1 meter
Single module
0.010%
<70 dBa
Warranty
standard
extended
5 years
10 years
Weight
kg / lbs
17,780 kg / 39,116 lbs
Excludes electrolyte
The system is designed with intent to comply with the following standards: IEE1547, UL1741, IEC62103 (EN50178)
Specifications are subject to change without notice
Imergy Power Systems, Inc.
48611 Warm Springs Blvd.
Fremont, CA 94539
www.imergy.com
[email protected]
© 2014 Imergy™ Power Systems, Inc. All rights reserved.
12000001005C