Accessories - CONTA-CLIP
Transcription
Accessories - CONTA-CLIP
WE TAKE CARE OF EVERYTHING IN THE ELECTRICAL CABINET Users of connection systems have come to rely on CONTA-CLIP‘s broad portfolio of products – and for good reason. Our products are developed in close consultation with users and under the strictest quality standards. They are available worldwide and are designed to meet individual requirements. Our quality ensures our future. Certifications are proof of our outstanding quality. Quality management at CONTA-CLIP is conducted in compliance with DIN ISO 9001 and the certification of our suppliers is a top priority for us. Our products also comply with the relevant international standards. We are very well positioned with products for all connection methods; our pioneering solutions have made us a technological leader in many sectors. Whether you’re using a screw-based, PushIn, tension-spring or stud-based wire connection system – our portfolio is in line with market requirements. There are many ways to implement an application: we always chose the best technical solution that ensures functionality and simple, safe operations. The proof lies in Reliability and customer orientation are at the heart of our everyday business. We personally deal with the concerns of our customers and offer them solutions that are tailored to their needs. Give us a try! Quality – made in Germany our completely satisfied users. Screw Connection System SRK | SSL PushIn Connection System FRK | FSL The clamping yoke transmits pressure from the screw to clamp The PushIn design makes wiring convenient and ensures the the wire conductor against the busbar. The required contact maximum level of contact security! Solid and stranded wires with force is generated by the torque applied to the screw. Because of wire-end ferrules can simply be inserted directly into the terminal its construction, the clamping yoke is able to provide the strong- point. A stainless steel spring ensures that the wire automatically est contact force and thus the lowest voltage drop. established contact with the busbar. APPLICATION ADVANTAGES APPLICATION ADVANTAGES • Cross-sections from 0.2 mm² to 240 mm² • Cross-sections from 0.2 mm² to 16 mm² • Pluggable or screw-on cross-connection system • Wire connection requires no tools • Two potentials can be guided in parallel • Pluggable cross-connection system • Cross-connections are possible between different cross-sec- • Two potentials can be guided in parallel tional areas using standard cross-connectors of up to 10 mm² • PE foot contact on both sides, up to 35 mm², can be snapped on (no screws) to the DIN rail • Additional connections from 4 mm² to 240 mm² • PE foot contact on both sides, can be snapped on (no screws) to the DIN rail Tension-Spring Connection System ZRK | ZSL Stud Connection System HSKG The tension spring is used to hold the wire connection securely The Stud connection system secures the wires onto studs using to the busbar. The stainless steel spring provides permanent con- ring cable lugs thus establishing safe electrical and mechanical tact force between the wire and the busbar. The tension spring is connection to the busbar. Our hinged terminal covers provide a fast connection method that can be used anywhere. touch protection and finger safety for all connections and appli- • Cross-sections from 0.2 mm² to 16 mm² cations where you are transferring power. APPLICATION ADVANTAGES • Pluggable cross-connection system • Cross-sections from 1.5 mm² to 300 mm² • Two potentials can be guided in parallel • Stud connection sizes: M6, M8, M10, M12 to M16 • PE foot contact on both sides, can be snapped on • Accessory installation requires no tools (no screws) to the DIN rail • Covers and partitions are easy to customize for different voltage levels • Combi-nuts prevent connection errors • Current carrying capacity of up to 520 A Connection types APPLICATION ADVANTAGES Single-level and multi-level terminal blocks SRK | SRKD Product highlights: screw connection technology • Double-level terminals and double-level PE terminals, with up to 10 mm² rated cross-section • Two inner cross-connection channels for easy distribution of potentials • Wide variety of pluggable cross-connectors SQI • Versatile auxiliary port with SMAG (pick-off terminals) Single-level and multi-level terminal blocks FRK | FRKD Product highlights: PushIn technology • Compact design requires minimal space • Pluggable cross-connection system FQI • Well-designed line of accessories for reducing your assembly and storage costs Single-level and multi-level terminal blocks ZRK | ZRKD | ZIKD Product highlights: Tension-spring technology • Pluggable cross-connection system ZQI • Vertical cross-connector ZQV: for multi-level terminals • Integrated test pick-off at each potential on the terminal blocks Fuse-disconnect terminals SSIK • Housing material with an extended temperature range of up to 140 °C • Two inner cross-connection channels • Can be cross-connected to the SRK series of feed-through terminals • Built-in receptacle for a spare fuse Test-disconnect terminals SPKT • Four cross-connection channels • Touch protection according to BGV A3 • Wide range of switching options with one terminal series • Innovative and comprehensive range of accessories for all applications Disconnect terminals FTRK | FDLI | FSIK Installation terminals FRKI | FDLIS • Wide range of functions achieved by combining the base terminals with optimized matching accessories • Optimized cross-section range for distributor installations • Disconnect terminal: can directly hold an auto-fuse/ Fuse holder for micro-fuse Initiator terminals FIK • Spacious cross-section range: up to 2.5 mm² rated cross-section • Integrated busbar holder in the NT terminals: no additional mounting plate required • Compact design • All PE terminals have the PE foot contact on both sides • Optional LED display for signal monitoring • Multi-level terminals for optimizing use of space Disconnect terminals ZTRK • Wide range of functions achieved by combining the base terminals with optimized matching accessories • Disconnect terminal: Can directly hold an auto-fuse/ fuse holder for micro-fuse Initiator-actuator terminals ZIZA • 3-wire and 4-wire initiator connections • Integrated potential distribution, without any additional cross-connector • Optional LED display for signal monitoring • Pre-assembled block variants are available which reduce your installation work Pluggable connection system ZST • Voltage range up to 500 V at 24 A • Touch protection according to BGV A3 • Locking, strain relief and coding • Compatible cross-connect system ZQI • Adapter for wall bushing CONTA-CONNECT | Industrial electrical connectivity • Plug-in LED display for AC/DC applications SDK feed-through terminals The SDK feed-through terminals are suitable for various account the contamination degree 3. Cable cross-sections applications involving device/housing technology. The co- between 0.2 mm² and 6 mm² must be used. The feed-through ordinated system components can be combined to achieve terminals have a two-part construction and are for panel various voltages – with a maximum voltage level of 1000 V thicknesses of 1 – 4 mm. They are available in a screw-connect (UL 600 V) for rated currents up to 32 A. The maximum version or a screw/solder-connection version. The latter version rated voltage is achieved by using the optional partition is designed for encapsulated device requirements and provides plates, spacer plates and adapter plates, while taking into the optimal seal for each application. The SSAB screw-shield connection clip and the SAB shield ohm contact junctions. Our comprehensive product portfolio connection clip are suitable for standard cable shielding. enables many installation options: including busbar, DIN rail or They enable EMC-compliant wiring with their contact direct mounting. surface areas. They also have low-impedance and low- Transformer terminals TKS On their output side, the TKS transformer terminals use wide-opening body caps (which are attached to the terminal our proven clamping yoke connection system. Their housings when opened) and the open-sided solder hooks on closed housing design ensures touch safety in compliance the busbar result in simplified processing and significantly with BGV A3. The housing material (PA 6.6 UL 94-V0) reduced production times. provides superior thermal stability for all areas of use. The CONTA-CONNECT | Industrial electrical connectivity Shield connection clip SAB | SSAB Marking systems It is important to mark cables, connectors and devices so that there is unambiguous, logically arranged and permanently legible identification. This helps to prevent mis-wiring, increases safety and reduces work levels, which in turn reduces manufacturing and maintenance costs including those caused by production down-times. Our line of marking products offers a practical solution for labelling all types of equipment. Housings A wide variety of housings are available in different sizes and materials (polystyrene, polycarbonate, polyester, ABS and aluminium); these offer solutions for protecting electronic circuits and for installing devices or terminal rails. The application’s requirements determine which material should be used for the housing. Our line of accessories are well designed to fit with our users’ requirements. Our accessories allow you to move forward on a great number of technical applications with a minimum of effort and parts. An overview of the portfolio: • Cabling ducts • Wire-end ferrules • Cable gland systems • Insulated connectors • DIN rails • Uninsulated connec- • End stops | End supports tors Tools There is also a wide range of tools available for the efficient processing of conductors, wires and cables. Our product line includes diagonal cutters, stripping tools, one-hand cable cutters, crimping tools, screwdrivers, as wells as punching and cutting tools for mounting rails and profiles. CONTA-CONNECT | Markers and labelling, housings, accessories, tools Accessories GSM-PRO communications processor GSM-PRO enables remote operation and maintenance, from the decentralized control room or from the service tech- and is used to control and monitor decentralized facilities. nician. Our Android and iPhone apps are available to make the It signals when the process has reached a certain status or monitoring and control functions even easier. If you are using specific limit. Digital and analogue inputs values can also multiple modules and need a complete overview in the field, be transmitted via e-mail or SMS (text message). The digi- our Portal software offers an interesting solution. tal relay outputs can be switched using an SMS sent IRC relay couplers and MFR-IRC timing relays embody a new cross-connections help to simplify your installation process. Our in- strategy for the 6.2 mm coupling relays. Our five different relay put/output relays and plug adapters for PLC/ribbon cable connections versions provide optimized use of space, simple installations, further simplify wiring and reduce the space needed in the electrical ease of use, and excellent functionality. They can be adapted for cabinet. For the Plus relay and the MFR timing relay, the fuse modules various application requirements because of the interchangeable can be used to easily add a micro-fuse to the output circuit. mechanical relays and optocouplers (SSRs). Different coloured CONTA-ELECTRONICS | Electrical and electronic coupling level IRC interface relays DC power supplies Converter units The operability of the electrical controller depends on Whether for manufacturing, electrical machine and plant the reliability of the selected power supply. A stable and instrumentation, control engineering, power distribution, safe power and voltage supply guarantees a trouble-free building automation, or process engineering – it is always production process in systems and mechanical engineering. important to guarantee that the signal exchange between Our product line includes many variants: including un- the peripheral devices and the upper-level central control smoothed and smoothed transformers, unregulated and and instrumentation systems remains operationally safe. regulated mains power supplies, as well as primary clocked Our product portfolio includes a wide range of different power supplies. signal converters with different designs for meeting many requirements. Surge protection Interface modules allow for a passive mechanical-electri- When choosing the correct device for overvoltage protec- cal implementation of standard connectors onto screw or tion, it is important to consider the VDE regulations dealing tension-spring PCB terminals. Because of their compact with surge-voltage resistance, insulation, and lightning design, clear terminal labelling, and their simple assembly protection classes. The CONTA-PROTECT protection com- onto TS 32 or TS 35 rails, this system represents an attrac- ponents meet or exceed the VDE and IEC requirements – tive alternative to a pure individual wiring approach. providing users with many clear benefits. CONTA-ELECTRONICS | Electrical and electronic coupling level Electronic modules PCB connectors Our PCB terminals for connecting to the circuit board The tension spring and PushIn wire connect methods offer enable a variety of connectivity solutions that are both further options. Because of their special design, they are well efficient and reasonably priced. Wire-protection, eccentric suited for use with vibrations, in a corrosive environment or tappet or clamping yoke connection types are available. with extreme temperature fluctuations. Our line of connectors is rich in variety and offers many nector product portfolio. The key features here are outstanding different wire connection options. This great range of com- ease of use as well as adjacent alignment and coding without bination options is made possible by our diversified con- loss of poles. CONTA-CON | PCB connection systems PCB plug-in connectors Services CONTA-CLIP is able to meet the requirements and chal- pete terminal rails onto DIN rails. We can also label according lenges of our customers by offering a range of custom to your requirements and assume responsibility for the solutions, including customized housing preparation, component storage. Thus you only need one part number terminal rail assembly and customized designs/construc- to specify a complex pre-assembled unit. We can then take tions. We can prepare DIN rails and housings according responsibility for the storage of individual components and to your specifications and fit these with cable glands or for the component list. customer-specific products as needed. We assemble com- At CONTA-CLIP, we are well known for mass-produced that match your custom requirements: including design, pro- functional electronics products – such as relay modules, curement of components, production, delivery and after-sales interface units, power supplies and surge protection units. support. We are your single-source solutions provider – from However, we also offer many customized solutions. Our design to production, for small or large jobs, and for simple or experts will work together with you to develop prototypes complex functional units. ECONOMIC COMPETENT CONSULTING FUNCTIONAL SECURITY CUSTOM-FIT SOLUTIONS MANUFACTURE LABELING COMMUNICATION AMONG EQUALS INNOVATION Services and special electronics Special electronics LOGISTICS ASSEMBLY ENVIRONMENT www.kontor-media.de www.conta-clip.com CONTA-CONNECT [Connection Systems] CONTA-ELECTRONICS [Electronics] CONTA-CON [PCB Connectors] CONTA-CLIP Verbindungstechnik GmbH Otto-Hahn-Str. 7 Phone +49(0)5257.9833-0 D-33161 Hövelhof Fax +49(0)5257.9833-33 [email protected] www.conta-clip.com