Built for strength. Built to last.

Transcription

Built for strength. Built to last.
Built for strength.
Built to last.
Model 225 SP with optional Stockton windows
TECHNOLOGIES
MODEL 225
MODEL 224
Model 225 Short Panel
Model 224 Long Panel
Long Panel
The cost effective Model 225 offers
exceptional value. The exterior of the door is embossed with a woodgrain
texture finish accented by an elegant raised panel design. The door is
composed of 25 gauge (.019) hot dipped galvanized steel with baked-on
polyester paint and reinforced rail for strength and safety.
s True 25 Gauge woodgrain textured steel
s Unique sculpted panel design
Color
Options
Short Panel
For strength and longevity, the Model 224 utilizes heavy
24-gauge steel without sacrificing beauty. The exterior of the door is embossed
with a woodgrain texture finish accented by a raised panel design. The door is
composed of 24 gauge (.023) hot dipped galvanized steel with baked-on polyester
paint and reinforced rail for strength and safety.
s True 24 Gauge woodgrain textured steel
s Unique sculpted panel design
s Short and Long panel
s Short, Long panel and Flush available
s True 2” section thickness
s 2” Section thickness
s Tongue and groove section rail
s Tongue and groove section rail
s Doors pre-painted white, almond, sandstone or brown
s Doors pre-painted white or almond
s 18” and 21” section heights
s 18” and 21” section heights
s All 21” sections include shadow groove
s No shadow groove
s Upgraded industry Hardware packs available
s Upgraded industry Hardware packs available
s Optional CFC free Polystyrene insulation with a rigid vinyl
backskin. Calculated R-Value 6.25
s Optional CFC free Polystyrene insulation with a rigid vinyl
backskin. Calculated R-Value 6.25
s Limited Lifetime warranty
s Limited Lifetime warranty
s Heavy gauge galvanized stiles
s Heavy gauge galvanized stiles
TM
s Exclusive RITS “Reinforced Integral Truss System” Design
s Exclusive RITSTM “Reinforced Integral Truss System” Design
s Window options available
s Window options available
www.firstudt.com
Color
Options
MODEL 625 (SB)
MODEL 325/725 (SB)
Model 625 SP with optional Sherwood Windows
Model 325 SP with optional Stockton Windows and
Decorative Handles
Flush Panel w/woodgrain texture
The Model 625 is a thermally efficient steel front
and steel backed “sandwich style”door. Formed with a unique sculpted raised
panel the Model 625 is embossed with a natural wood grain texture. The core is
CFC free Polystyrene insulation with a steel back skin for thermal efficiency. The
Model 625 door will add great value and beauty to any home.
s 25 Gauge face/26 gauge back woodgrain textured steel
s sculpted panel design
s Short, Long panel or Flush available
Bead Panel
The Model 325 has a unique bead board raised panel,
the Model 325 is embossed with a natural wood grain texture raised panel with
recessed vertical grooves and a baked-on polyester finish. The Model 325 will give
your home the appearance of having custom wood carriage house doors with the
durability and longevity of steel and minimum maintenance.
s True 25 Gauge woodgrain textured steel
Color
Options
s Recessed verticle grooved panel design
s 2” section thickness
Color
Option
s True 2” section thickness
s Tongue and groove section rail
s Tongue and groove section rail
s Pre-painted white or brown (sandstone special order)
s Doors pre-painted white, almond (sandstone or brown special order)
s 18” and 21” section heights
s 18” and 21” section heights
s No shadow groove
s Shadow groove on 21” sections
s Upgraded industry hardware packs available
s Upgraded industry hardware packs available
s Optional rigid vinyl back skin (325)
s CFC free Polystyrene insulation with a 26 gauge steel back skin
s Limited Lifetime warranty
s Limited Lifetime warranty
s Exclusive RITSTM “Reinforced Integral Truss System” Design (model 325 only)
s Window options and decorative hardware available
s Window options and decorative hardware available
s Calculated R-Value 9.0
s Optional CFC free Polystyrene insulation
s Full section height hinge internal strip
s Model 325 calculated R-Value 6.25
s Optional model 725 with 26 gauge steel back skin and calculated R-value
9.0 available
www.universalgaragedoor.com
www.universalgaragedoor.com
TECHNOLOGIES
Garage Door Decorative Window Options
Let your garage door’s beauty shine through with window options that complement the architecture and
style of your house. They are available in variety of styles match various home designs and the inserts are
easy to remove for trouble-free cleaning or to change
designs. Windows are available with a selection of
Short Panel
Long Panel
glass upgrades and have a 2 year warranty
against defects in materials or workmanship.
Short Panel
Long Panel
Prarie
Sherwood
Plain View
Stockton
Sunburst 4 (SP only)
Sunburst 8 - SP
Cascade
Sunburst 4 - LP
Stockbridge
(LP only)
Note: When ordering model 325/725 glasstop, please specify if glass style is short or long panel.
Door Hardware
Steel Cast Handles
Door Pulls
Steel Cast Hinges
Arrowhead Hinge-12" #CCAH-B10
Rosette Hinge-12" #CCRH-B11
Dome Hinge-12" #CCDH-B12
Standard Handle Dome End
Rosette
#CCSH-B1 Twist Handle
Handle
(Stamped)
#CCDE-B3 #CCRH-B14
Drop Ring
Pull Handle
#CCDRP-B6
Drop Ring Twisted Lever Handle
Twist Handle
#CCTLH-B14
#CCDRT-B7 (Pair/Fixed Position)
Exclusive RITS™ Design
Exclusive RITS™ “Reinforced Integral Truss
System” design, for increased section
strength and wind-load capabilities that
include tongue and groove weather
resistant meeting rails.
I-Beam Center Stiles - I-beam center
stiles are engineered to reinforce the
construction of the section and designed to
eliminate the use of plastic reinforcement
angles when the section is insulated.
Reinforced Aluminum
Bottom Extrusion
Heavy duty grooved “U” type weather seal
is set into an aluminum reinforced “L” angle,
and fastened to the bottom section.
Sunburst 2 (LP only)
Cathedral
Diamond
Optional Energy Efficient Insulation
CFC free Polystyrene insulation with a rigid
vinyl back skin, R factor of 6.25. Laminated PVC
backing is available as a factory installed option.
Calculated door section R-Values are
in accordance with DASMA TDS-163.
Spade Hinge-12" #CCSH-B13
Residential Quiet Package
First United Door Technologies offers the Residential Quiet Package which consists of two noise reducing
products to insure a more quiet operation of your garage doors. Worn metal hinges make a lot of noise and
can cause the door to bind at the door sections. But now there’s a solution. First United Door Technologies’
residential composite hinges are engineered from fiberglass reinforced nylon and rated for doors up to 400
pounds. They are strong, flexible and will never rust. Unlike steel hinges, they won’t make any squeaking or
squealing noises when used. They require NO lubrication and are great for areas where corrosion is a concern.
Also included in this package are 11-Ball Nylon Rollers. The more ball-bearings inside the garage door roller
there are, the quieter and smoother the garage door will run.
Warranty - The Model 225, 325, 725, 224 and 625 offer a limited lifetime warranty. 1st United Door Technologies
warrants each garage door to be free from defects in material and workmanship to the original purchaser. A
copy of this warranty is available upon request or downloadable from our website www.firstudt.com.
Universal Series garage doors are available with a wind load reinforcement system to withstand high-wind
conditions. Factory quote only.
Window, Window Frames & Inserts Limited Warranty - If any window or window frame is defective in material
or workmanship, First United Door Technologies warrants to the original purchaser that First United Door
Technologies or its Authorized Dealer, will repair, repaint or replace, at First United Door Technologies or its
Authorized Dealer’s, option, the defective item for two (2) years from the date of purchase. Garage doors,
frames and inserts that are painted or stained with darker colors are susceptible to fading. The warranty
excludes fading or change in color that is not uniform due to exposure to sunlight or other elements. For any
insulated or laminated glass that is defective in material or workmanship, First United Door Technologies warrants
to the original purchaser that First United Door Technologies or its Authorized Dealer, will repair, repaint or
replace, at First United Door Technologies or its Authorized Dealer’s option, the defective item for two (2) years
from the date of purchase. This warranty excludes single pane glass and decorative hardware.
Face/Back side colors: White/White; Almond/White; Brown/Sandstone; Sandstone/Brown
*Check with your local Dealer for price and availability. Color may vary. Factory color chip samples available
for closer match.
Brochure color options may vary from actual product.
1st United Door Technologies, LLC
1016 W. Geneva Drive I Tempe, Arizona 85282
Phone: 480-705-6632 I Fax: 480-705-8497 I Toll Free: 866-366-7636
International Door Association
Develop and Promote Door Dealer Excellen
Excellence
Universal Series 03-15