Pre-Bid Meeting No. 02/2015-16

Transcription

Pre-Bid Meeting No. 02/2015-16
GUJARAT MEDICAL SERVICES CORPORATION LIMITED
(A Government of Gujarat Undertaking)
Regd. Office: Block No. 14/1,
Dr. Jivraj Mehta Bhavan, Sector-10, Gandhinagar
 079-23250767, 23250766, 23257696
Pre-Bid Meeting No. 02/2015-16
A Pre-Bid meeting for specification of following item is organized in the
Committee room of this Organization. Manufacturers, Authorized
representatives / Dealers of this item is invited to attend this meeting.
No.
(1)
Name of item
Sanitary Napkin – 10,00,000
Pkts.
:
Date & Time
30/04/2015 at 11.00 Hrs.
Specifications of above item can be downloaded free from web site:
http://gmscl.gujarat.gov.in. Specifications are also available on this
office's notice board.
INFMANAGING DIRECTOR
U]HZFT D[0LS, ;lJ";L; SM5M"Z[XG ,LDL8[04 UF\WLGUZ
a,MS G\P !$q!4 0F"P HLJZFH DC[TF EJG4 UF\WLGUZP
 _*)vZ#Z5*&)&
[ l5|vAL0 DL8L\U G\P ZqZ_!5v!&
GLR[ NXF"J[, VF.8DGF :5[XLOLS[XG DF8[ l5|vAL0 DL8L\U VF T\+GF SlD8L ~DDF\ ZFBJFDF\
VFJ[, K[P VF VF.8DGF pt5FNSM4 VMYMZF.h0 5|lTlGlWVM q 0L,ZMG[ DL8L\UDF\ p5l:YT
ZC[JF VFD\l+T SZJFDF\ VFJ[ K[P
G\P
!
;FWGG] GFD
TFZLB VG[ ;DI
;[G[8ZL G[5SLG v !_4__4___ 5[S[8;
o
#_q_$qZ_!5 !!o__ S,FS[
p5ZMST VF.8DGF :5[XLOLS[XG J[A ;F.8 o http://gmscl.gujrat.gov.in 5ZYL lJGF D]<I[
D[/JL XSFX[4 :5[XLOLS[XG VF SR[ZLGF GM8L; AM0" 5Z 56 p5,aW K[P
DFlCTL o
D[G[HL\U 0LZ[S8Z
1
PRE-BID
T.E. NO.:
Name of Item :
GMSCL/EQUIPMENT PURCHASE/D-219/2014-15
# 219.01 Sanitary Napkins
DATE: 30/04/2015
TIME: 11.00 HRS.
[A]
Required Specifications
[1]
1.1
MATERIALS
Absorbent filler:-The filler material should be celloulose pulp and shall be
free from lumps, oil sports dirt of foreign materal.
Covering:- The covering of the absorbent filler shall be of a good quality
cotton non-woven knitted with sufficient porosity to permit the assembled
pad to meet the absorbency requirements.
SIZES
The size of sanitary napkin shall be as follows.
Sizes
Pad Length mm
Width mm
Thickness mm
Regular
200 ± 20
60 to 75
15 ± 2
The thickness shall be measured by stacking 10 complete pads and
measuring the stack height. The average thickness for the 10 pads shall be
used as the pad thickness.
Weight :- Cellulose Pulp- minimum 8 gm
Total weight of sanitary Napkin:- minimum 10 gm
Backstrip:- A backstrip for sticking the sanitary napkin onto the underwear
should be there using good quality adhesive material
MANUFACTURE,WORKMANSHIP AND FINISH
The abson bent filler shall be arranged and neatly cut to the required size at
the pad and form a uniform thickness throughout without any wrinkles.
It shall be placed in the covering in such a way that it does not cause lump
formation with the effect of sudden pressure.
The covering fabric shall cover the filler completely, and in case of napkins
with tabs, extend beyond the length of the filler to form tabs or loops at
each end for securing the pad in use.
In case of tabless napkins, and an adhesive system or other suitable method
may be introduced for holding the napkin securely in position.
The sanitary napkins shall have a non-absorbent barrier on one side which
shall have an identifying thread on marking indicating clearly the side of
the barrier.
When the sanitary napkins are claimed as disposable, they shall be
manufactured from disposable material.
The sanitary napkins shall have a very soft feel and when worn shall not
chafe or give any uncomfortable feeling. They shall be free from all sorts
of foreign matter.
REQUIREMENTS
Absorbency and ability to Withstand pressure after Absorption:- The
sanitary napkins shall absorb 30 ml of coloured water or oxalated sheep or
goat blood or test fluid when flowed on to the center of the pankin(at the
rate of 15 ml per minute) and it shall not show up at the bottom or sides of
the sanitary napkins.
Disposability:- A disposable sanitary napkin with the covering removed,
shall be immersed in 15 liters of water and stirred. The pad shall
disintegrate in the water in not mor than 5 minutes.
pH Value:- The sanitary napkins shall be free from acids and alkali and the
pH of the absorbent material shall be 6 to 8.5.
1.2
[2]
2.1
2.1.1
2.2
2.2
[3]
3.1
3.2
3.3
[4]
4.1
4.2
4.3
1
Specifications
available in offered
Model
PRE - BID
T.E. NO.:
Name of Item :
4.4
a)
b)
c)
[5]
5.1
5.2
[6]
6.1
GMSCL/EQUIPMENT PURCHASE/D-219/2014-15
# 219.01 Sanitary Napkins
DATE: 30/04/2015
TIME: 11.00 HRS.
Instructions:- Following instructions shall be included in every packet of
sanitary napkins:
Method of use;
Indication as to which side is a absorbent; and
Disposal insturctions, such as that the napkins without covering can be
disposed off in water closets.
. PACKING
Sanitary napkins shall be packed in polythylene lined carton or
polyethylene bag. The carton shall have the insturctions printed on the
outside of the polythlene bag or carton.
Pack of 6 sanitary napkins
MARKING
The carton may also be marked with the ISI Certification Mark.
2