YN-485I MANUAL å®å®ç§æ Your Neighbor Tech 1
Transcription
YN-485I MANUAL å®å®ç§æ Your Neighbor Tech 1
Dimensions&Communication LED Status Packing List Before you begin installing, please make sure that the following materials have been shepped: YN-485I x1 USB cable x1 Driver&Manual CD x1 This Manual x1 If any of these are missing or damaged, contact your distributor or sales representative immediately. RXLED TXLED RXLED TXLED Specifications Your Neighbor Tech’s YN-485I allows PC users to connect their RS-485 devices to systems that use USB interface. By attaching the YN-485I to a PC, it will no longer be necessary to open the chassis or turn off the PC to install the hub. With the YN-485I , the user instantly gets one extra high-speed RS-485 ports. In addition, since the power is derived from the USB port, there are not any cumbersome power adapters. This makes the YN-485I especially suitable for PLCs, printers, POS system and industrial control devices. 1 Manual All producion specifications are subject to change without notice. Internal terminal resistor connected if pin 1-2 is shorted RS-485 side isolated GND, connect to ground or shell RS-485 Data+ RS-485 Data- Application Wiring If YN-485I connected as a terminal point on the RS-485 bus, connect pin 1-2 and add a terminal resistor on the other side of the bus. USB RT YN485I Master D-/B D+/A PC 5.D-/B 4.D+/A 3.GND 2.RT 1.RT ... RS-485 Slave1 D-/B D+/A RS-485 SlaveN RS-485 Slave(N-1) If YN-485I connected as one of the mid point on the RS-485 bus, add terminal resistor on each side of the bus and left pin 1,2 unconnected. D-/B D+/A RS-485 Slave1 RT RT RS-485 Slave2 ... RS-485 Slave i D-/B D+/A Overview RT GND D+/A D-/N D-/B D+/A Power Consumption: Max. Distance: Case: Operating Temperature: Operating Humidity: 1,2 3 4 5 5.D-/B 4.D+/A 3.GND 2.RT 1.RT Transmission speed: Parity bit: Data bit: Stop bit: Isolation protection: Driver Support: Pin Defination USB v2.0 standard Network:USB Serial:RS-485 One Independent RS-485 ports Network: USB-type A connector Serial: Screw terminal 600bps to 115.2Kbps odd, even, none 5, 6, 7, 8 1, 1.5, 2 2,500 V Windows 2000/2003/XP/Vista/7 (32bit and 64bit) Linux/Mac 1.5W @ 5V 4000ft (1200m) @ 19.2Kbps Blue transparent ABS -30℃~+70℃ 20% to 95% (non-condensing) D-/B D+/A 宇宁科技 Your Neighbor Tech Compatibility: Interface: Port: Connector: 5.D-/B 4.D+/A 3.GND 2.RT 1.RT Flash when data from RS-485 to USB Flash when data from USB to RS-485 D-/B D+/A YN-485I MANUAL YN-485I Magnetically Isolated USB to RS-485 Converter D-/B D+/A RS-485 SlaveN RS-485 Slave(N-1) YN485I Master 2 Manual All producion specifications are subject to change without notice.