Serial I/O Controller
Transcription
Serial I/O Controller
Serial I/O Controller Authentic Mercury MR serial Input/output (SIO) devices represent the secondary level in Mercury’s distributed architecture. The devices offer flexibility for our OEM partners, ensuring they can choose the controller that best fits their needs. The MR52 is a dual-card reader interface panel with on-board flexibility to connect to a wide range of security devices. The economical MR52 is easy to install and provides the necessary I/O for controlling two doors with auxiliary point control and monitoring – all in a single device. Each high-performance unit can connect two card readers, eight general-purpose input monitor points and six control relays to any Authentic Mercury EP series intelligent controller. Features • • • Multi-facility code and reader technology support AES 128 bit data encryption Configurable auxiliary point control and monitoring HSPD-12/FIPS201 compliant UL 294 recognized • Universal I/O device characterization • • Benefits • • • • Affordable flexibility Reliably support a wide variety of sensors and control technologies Easy to install Supports OSDP, Wiegand, RS-485, magnetic stripe and keypads www.mercury-security.com With two-wire RS-485 connectivity, the MR52’s two reader ports support OSDP, Wiegand, RS-485, and magnetic stripe readers. Keypads and integrated keypad readers are also supported. Hardware interface and card format settings are loaded through software commands. The MR52 is an ideal choice for a versatile and reliable interface panel for two doors. Application Notes The inputs and the relays may be assigned to door-related functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and nonsupervised circuits. End-of-line (EOL) resistance values are configurable, and the relays can be configured for fail-safe or fail secure operation. When connected to an Authentic Mercury EP intelligent controller, the MR52 can relate the activities of selected system devices to other devices within the system, generating actions and allowing activities to occur independent of the host. The MR52 can also locally process access requests based on facility code verification, even when disconnected from an intelligent controller. Several facility codes may be active in each MR52. Give your access control system wings. Serial I/O Controller MR52 Primary Power: 12-24 VDC +/- 10%, 550mA maximum 12Vdc @ 450mA nominal 24Vdc @ 270mA nominal Communication: RS–485, 2-wire, 4,000’ (twisted pair with shield, Belden 9841) Reader Ports: 2 Reader Ports Power: 12 Vdc regulated, 125mA each reader Data Card/Keypad Clock/Data, Data–1/ Data–0, or RS-485 Keypad: 8-bit Mercury, 8-bit Dorado, 4-bit HID LED: One-wire bi-color LED support, or twowire Buzzer: Only with ‘one-wire’ LED Inputs: 8 General purpose: Programmable circuit type 2 Dedicated: Tamper and Power Monitor Outputs: 6 Relays: Form–C, 5 Amp 28 Vdc Dimensions: 6.0’ W x 8.0’ L x 1.0’ H, (152mm W x 203mm L x 25mm H) Temperature: 0—70 °C operational, -55—85 °C storage Humidity: 0 to 95% RHNC Standards: UL 294 recognized CE compliant RoHS Network Switch To Mercury OEM Host CAT5/CAT 6 MR51e 1 2 3 4 Door 1 EP1502 9 2 10 3 11 4 12 5 13 6 14 NC K2 7 15 NO K4 8 16 C NO 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NC C K9 K1 NO OUT 9 TB5 TB1 NC NO NC C OUT 2 OUT 3 NC OUT 4 NO C NO OUT 10 K10 K11 K3 NC K12 C NO OUT 11 NC C NO K14 NC C C NC NO OUT 13 TB7 TB3 BA OUT 5 K13 K6 NO BA NO NC C K15 K7 K1 C NC J5 NO OUT 14 NO 8 7 6 5 4 3 2 1 NC K8 C NO OUT 115 TB8 NO NC K16 NC OUT 7 TB4 C U1 C C NC OUT 8 NO OUT 16 J6 A CT GND J1 S1 U1 1 2 3 4 5 6 7 8 J2 J3 TB10 J3 VIN 2W 4W J1, J2 RS-485 TERM J8 TB11 J4 12 34 567 8 R+ GND CT BA TR+ TR- R- B J7 J4 J2 TR- TR+ VO GND TB1 DAT D0 TB4 GND 4W RS-485 BZR BA GND K2 2W LED B K1 J5 TB9 GND A DAT D1 OUT 12 C K5 NC CT OUT 6 J6 2 C OUT 1 TB6 TB2 MR50 1 1 TB2 I1 VIN C I1 GND I2 NC C NO NO TB3 MR52 K2 1 2 3 4 K2 NC K1 I2 RS485 MR16IN Door 1 MR16OUT Door 2 Door 1 Door 2 Door 1 The Authentic Mercury open platform delivers quality assurance derived from the most proven and reliable hardware in the industry. Driven by our engineering excellence and technology leadership. Authentic Mercury hardware is designed as an access control platform that easily encompasses emerging technologies, changing industry standards and evolving system environments. Make yours Authentic, Make sure its Merc.